Tender For Providing New Borewell And Motor Accessories @ Keezhvadakuthu In Vadakuthu Panchayat
Tender Value
14.26 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
13 days left
EMD
14260
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuddalore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing New Borewell And Motor Accessories @ Keezhvadakuthu In Vadakuthu Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | PROVIDING NEW BOREWELL AND MOTOR ACCESSORIES @ KEEZHVADAKUTHU IN VADAKUTHU PANCHAYAT |
| 2 | Geophysical : survey charge a) Drilling of bore well in alluvial soil sedimentary strata of clay and sand stone, shale, pebbles, boulders etc., by first taking a pilot bore of 140mm/ 150mm/ 200mm dia and then enlarging to required dia by direct or or reverse rotary mud circulation method, using contractor’s rig, fuel, labour, drilling, at the site shown by the Departmental Officers including construction of mud pit and transportation (Water available within a lead of 1.5Km) using Rotary Rig. a) Drilling of 140/150/200mm b) Pilot bore |
| 3 | Upto 60mts. Depth ending below G.L |
| 4 | From 60mts. And upto 90mts. Depth ending below GL |
| 5 | From 90mts. And upto 120mts. Depth ending below GL |
| 6 | b. Reaming from 140/150mm dia pilot bore to 300mm dia bore as directed by the Departmental Officers. Upto 60mts. Depth ending below G.L |
| 7 | From 60mts. And upto 90mts. Depth ending below GL |
| 8 | From 90mts. And upto 120mts. Depth ending below GL |
| 9 | C.Reaming from 300mm dia pilot bore to 400mm dia bore well as directed by the Department Officers. Upto 60mts. Depth ending below G.L |
| 10 | From 60mts. And upto 90mts. Depth ending below GL |
| 11 | From 90mts. And upto 120mts. Depth ending below GL |
| 12 | Logging charges for bore well |
| 13 | Supply and delivery of the following materials required for the erection of borewell a) 200 mm dia OD PVC plain casing pipe |
| 14 | b) 200 mm dia PVC ribbed screen casing pipes |
| 15 | c) 200 mm dia bottom Dummy |
| 16 | d) Bore well top Cover |
| 17 | Labour charges for inserting PVC casing pipes (With slots or without slots) in the drilled hole including jointing the pipes, supplying and packing the annular saace with pebbles of size and quality as approved by the department officers. b) 200 mm OD PVC pipe |
| 18 | Charges for developing the bore well with aire compressor of 450cfm/600cfm capacity ( minimum 8 hours ) including transportation labour and fuel charges for compressor as directed by the Department Officers as directed and conducting yield test by “V” Notch methods. |
| 19 | Three Phase Submersible Pump Set 250lpmX125M Head |
| 20 | 15H.P. Panel Board Starter |
| 21 | 50mm GI Pipe Medium |
| 22 | 4 Sqmm Cable |
| 23 | 50mm GI Jockey Thrad Coupler |
| 24 | 50mm MS Clamp |
| 25 | 50mm GI Elbow |
| 26 | 50mm GI Flange |
| 27 | 50mm GI Tee |
| 28 | Charges for Erection of Submersible Pump ste in Borewell |
| 29 | Earth Excavation and depositing on bank for with an initial lead and lift in all type soil for pipe line for 90 mm dia pipe |
| 30 | Supply of unlasticised 90 mm OD PVC/6ksc rigid Pipes as per BIS 4985/2000 with ISI Marking to site of works |
| 31 | Lowering and Laying of the 90mm dia PVC pipes and specials to trench ,laying to proper grade and alignment,jointing with PVC coupler and specials fixing with solvent cement paste etc., complete |
| 32 | Re-filling with excavated soil complying with standard specification in layers of 15cm thick well rammed and consolidated after ipes and specials are laid and tested |
| 33 | Supply of PVC Specials as per BIS 10124/1998 Part 1 to 13 & BIS 7834/1975 with ISI Marks to Site works etc complete 63mm PVC Bend(4KSC) |
| 34 | 63mm PVC Tee(4KSC) |
| 35 | 63mm PVC End Cap |
| 36 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender