Tender For Madurai District Renovation Of Ads Room Toilet At T.Kallupatti Rird Office C Us At T.Kallupatti Panchayat Union
Tender Value
1.15 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
2 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Madurai District Renovation Of Ads Room Toilet At T.Kallupatti Rird Office C Us At T.Kallupatti Panchayat Union
BOQ
| Sl. No. | Item Description |
| 1 | Madurai District Renovation of AD'S Room Toilet at T.Kallupatti RIRD Office Campus at T.Kallupatti Panchayat Union |
| 2 | Dismantling and clearing of old damage Brick / stone masonry in cement mortar walls under 3 m high (scdl item no. W-0015) |
| 3 | Dismantling and clearing of old damaged Doors and Windows including removal of frames, hinges and fastenings inSI item no. W-0029) |
| 4 | Dismantling and clearing of Mosaic-in-situ finish in cement mortar in flooring and in wall surface in all charges etc,. W-0041 |
| 5 | Clean removal of cement plaster from walls (sch. item no. W-0104) |
| 6 | Supply and fixing of Pary ware Western water closet with wall mound in all labour charges etc,.(M-0648) |
| 7 | Supplying and fixing of White Glazed Porcelain Oval Shape Special Type Urinal of size 382 x 398 x 601mm M-0559 |
| 8 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 9 | Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. (Dadooing with printed design colour glazed tiles of size 300 x 450 x 8mm) |
| 10 | Fabricating, Supplying and fixing in position Mosquito net arrangements of Openable type. The Outer frame shall be made with Powder coated AluminiumNatural colour matt finishAluminium Hollow section of size 31mmx40mmx1.55mm. The Vertical center Mullion made with Aluminium Hollow section of size 5mmx11mmx1.55mm.The Horizontal and Vertical Aluminium Hollow section Shutter frame of size 31mmx13mm with a thickness of 1.55mm. The Mid Horizontal Aluminium Hollow section frame provided in the shutter with a size of 0mmx11mmx1.55mm. The Epoxy coated Stainless Steel 304 grade wiremesh with dia of 0.19mm shall be provided for Net. The U shaped Aluminium handle provided in the each shutter with a size of 19mmx26mm. The Connection Mechanism between Shutter and Outer frame that enables opening the Mosquito net. The Mosquito net arrangement should be fixed to the window with 100% packing with Screws, Silicon packing all around the frames with including cost ofall materials, labours, power consumption required for fabrication, drilling holes in RCC column/wall, masonry walls, Window frames, wherever necessary with drills to the required extent and make good to the original conditions after fixing and also asdirected. All the Aluminium sections are to the powder coated with matt finish under electrically controlled conditions in accordance with relevant IS Code etc.complete complying with standard specification and as directed by the departmental officers.M-2996 |
| 11 | Providing UPVC (Un-Plasticized Polyvinyl Chloride)Door: Providing and fixing casement doors fabricatedfrom un-plasticized polyvinyl chloride (uPVC) sections.Profiles: The profiles should be three chamber systemwhich provides high insulation properties with outer frame60mm x 55mm with an outer wall thickness of 2.4mm.The window unit should be designed with all corner jointsmitred and fusion welded. Windows should be steelreinforced with 25 x 24 x 25mm steel reinforcement witha thickness of 1mm to have dimensional stability. Thesash should be of 60 x 02mm. The mullion should be of60 x 74mm. The profiles should have co-extruded eals.Hardware: All the hardware like friction stays,handles should be screwed with self tappingscrews. The handles, locks should be designedso that they canot be released from outside.Glazing: The window system should be glazedwith 5mm plain float glass / 6mm bison lamInstallation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.M-0673 |
| 12 | Supply and fixing of SS Towel Rack 600mm long with Lower Hanger in all labour charges etc,.M-0564 |
| 13 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into thewall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supportingarrangements the hand rail in floor polishing buffing, bonding, cutting, inding,conveyance, welding charges,electrical charges, etc. complete M-0652 |
| 14 | Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer |
| 15 | Wiringwith2x1.5sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessoriesandwithTWswitchboxand5AFTswitchwithpaintingofsuitablecolourfor open PVC light point / fan point (for electronic regulator) (6 points per coil) SD 20 |
| 16 | Supplyandfixingof300mm(12\\")sweep(lightduty)ACexhaustfancompletewithnecessarywallopeningandmakinggood of the wall SD 114 |
| 17 | Wash hand basin - white without pedastal M-0544 |
| 18 | Fitter IInd Class L-0068 |
| 19 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender