Tender For Re Construction Of Badminton Court In Collectorate Master Plan C Us Villupuram
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Oct 2026
4 days left
EMD
85500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Villupuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Re Construction Of Badminton Court In Collectorate Master Plan C Us Villupuram
BOQ
| Sl. No. | Item Description |
| 1 | NAME OF THE WORK: RE CONSTRUCTION OF BADMINTON COURT IN COLLECTORATE MASTER PLAN CAMPUS VILLUPURAM |
| 2 | Earth work excavation in all soils and sub-soils and to full depth, as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 1o mts within the compound in places shown by the departmental officers and clearing and leveling the site etc. complete complying with standard specification. |
| 3 | Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc, in layers not exceeding 20cm in depth consolidating each layer by ramming and watering with all lead and lifts. |
| 4 | Supplying and filling in foundation, basement, etc with filling M.sand in layers of not more than 15cm thick well watered, rammed and consolidated etc.complete complying with standard specification and as directed by the department officers. |
| 5 | Supplying and Filling the Foundation basement with conveyed earth in watered and consolidated as directed. |
| 6 | Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification |
| 7 | Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers |
| 8 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 9 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) |
| 10 | Providing and laying cement concrete smooth finish flooring 75 mm.thick with M25 concrete including giving a floating coat of 1.1 cement mortar, with nominal temperature steel or steel fbers/Graded PP fibres/polyester fiber of Reliance etc. complete as specified by the Architect/Engineer-in-charge. The rate shall be inclusive of reinforcement steel/Graded PP fibers/Polyester fiber of reliance and the same shall be paid in relevant tender items. Rate shall be inclusive of concrete (to be laid in alternate panels) with steel channel formwork. |
| 11 | Brick work in CM 1:5 (One cement & Five crushed stone sand (M-Sand)) using II class ground moulded bricks of size 9\\"x4 3/8 x 2 3/4 standard specification including finishing, curing, etc., complete complying with standard specification ( Masonry projections wherever necessary for obtaining required elevation shall be doe without extra cost). - Upto Basement |
| 12 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 13 | Supplying and fixing Teak wood door panelled shutter with frame for door fully panelled with 25mm thick T.W planks, the door shutters styles will be of 75mm x 40mm & Top rail will be of 100 x 40mm the lock rail will be of 125mm x 40mm and the bottom rail will be 150mm x 40mm and Frame size 100 x100mm and both sides should be finished with 4mm thick venner, including cost of furniture fittings and cost of wind appliances and labour charges for fixing furniture etc., and fixing up shutters in position and Best French (lac) polising with 2 coats T.W. Doors, Windows, Ventilators, including cleaning the surfaces etc., complete complying with standard specifications. |
| 14 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 15 | Providing, fabricating and fixing M.S. grills Windows, and ventilator,gates, ladders, rail pipes, nosing angles, with M.S.lugs in staircase steps etc., made out of M.S rods, flats, angles, pipes, channels etc. including necessary fixtures complete as per drawings and specifications and as directed by the Engineer. |
| 16 | Solid PVC door shutters Toilet door using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings.The over all size of styles shall be 50mm x 30mm.The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm.The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter. |
| 17 | Supplying and laying in flooring Jet Black colour fully polished Granite Slabs of size 1200 x 600mm (Super fine polished with machine cut edges) of 18mm to 20mm thick (average) laid over base base layer of cement mortar 1:3 (one cement and three plastering sand (P-Sand) - 20mm thick and applying cement slurry & pointed with white cement and colour pigments to the colour of stones polished neatly as directed by the department officers |
| 18 | Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 19 | Providing & fixing PVC RAIN WATER DOWNFALL PIPE of 110mm dia with necessary T.W. Clamps Plugs, shoes, bemds, other clamps, screws nails etc., complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak wood plugs used is 150x25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of 'U' clamps at the centre of pipes to be fixed 110mm dia PVC Pipe [4 kg/SqCm] |
| 20 | Supplying and fixing in the position best quality approved make white galzed earthenware wash hand basin of size 550 x 400mm with a pair of casr iron brackets, including cost of 15mm diametre brass chromium plated piller tape, 32mm diametre C.P. Waste union, 32mm diametre P.V.C waste pipe with rubber plug and chain, 15mm diametre G.M. wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the eash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leackage etc., complete complying with standard specification. |
| 21 | Supplying and fixing in position White / Colour special Delux Model Glazed cascade Type Parryware/ Hindware/ Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. |
| 22 | Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. |
| 23 | For 20mmø PVC Pipe |
| 24 | Supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 x 450mm with necessary plastic back, PVC frame with bottom stand of approved colour with brass screws, rawal plugs etc., complete complying with standard specifications. |
| 25 | Supplying and fixing best approved quality Brass C.P anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications |
| 26 | Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements. |
| 27 | b) 25mm dia G.M. Gate value |
| 28 | Steel work in built up tubular (round,square or rectanglar hollow tubes etc.) trusses etc., including cutting , hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete - hot finished welded type tubes, including painting one or more coats. |
| 29 | Providing corrugated G.S.sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diametre with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required - 0.63 mm thick with zinc coating not less than 275 gm /sq.m |
| 30 | Supplying and fixing G.I Sheet Gutters fir Collecting rain water from slopped position of G.I Sheet 0.8cm thick, 0.70cm wide with appropriate hanger including fixing in position and necessary cost of brackets, screws, nails etc., complete. |
| 31 | Providing and fixing 15cm wide ,45cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete - 0.63 mm thick with zinc coating not less than 275 gm / sq.m |
| 32 | Indoor Synthetic badminton court floor 4.5mm-9mm thick |
| 33 | Solar reflecting paint (along with water proofing coating ) providing and applying of solar reflecting paint ,acrlyic polymer based elastometric water proofing coating having solar reflecting index for marking |
| 34 | Electrification arrangement |
| 35 | Cost and supply of 2000 lit HDPE Tank |
| 36 | Supply and fixing of seating arrangement |
| 37 | Dismanling Existing CC floor including all charges |
| 38 | Dismanling Existing AC Sheet Roofing without roof timbers |
| 39 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 40 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender