Tender For Construction Of Bus Shelter At Karthigaipatti Village In Idaiseval Panchayat In Kovilpatti Union Under Mplads (2026-2027)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Oct 2026
5 days left
EMD
8000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Bus Shelter At Karthigaipatti Village In Idaiseval Panchayat In Kovilpatti Union Under Mplads (2026-2027)
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Bus shelter at Karthigaipatti Village in Idaiseval Panchayat in Kovilpatti union under MPLADS (2026-2027) |
| 2 | Earth work excavation in all clauses of soil with initial lead of 10 m and initial lift 2 m except hard rock, blasting, etc., complete as per standard specification. |
| 3 | Cement concrete 1:4:8 mix using 40 mm ISS HBG metal including all cost and conveyance of materials, labour charges such as compaction, curing, etc., complete as per standard specification. |
| 4 | Brick work in CM 1:5 using country bricks including all cost and conveyance of materials, labour charges such as curing, etc., complete as per standard specification. |
| 5 | Towards the cost and supply of steel including charges for fabrication and placing in position, etc., complete as per standard specification. |
| 6 | Centering charges for sides and soffits of R.C.C.works including labour etc., complete as per standard specification. |
| 7 | Below GroundLevel |
| 8 | Above GroundLevel |
| 9 | R.C.C. 1:11/2:3 mix using 20 mm ISS HBG metal including all cost and conveyance of materials, labour charges such as curing, etc., complete as per standard specification. |
| 10 | Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 11 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 12 | Finishing the roof with machine pressed tiles of size 23cm x 23cm of approved quality in c.m.1:3, 12mm thick including water proofing compound, labour charges such as curing etc. complete complying with standard specification. |
| 13 | Plastering with CM 1:5 mix 12 mm thick including all cost and conveyance of materials, labour charges such as curing, etc., complete as per standard specification. |
| 14 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 15 | Supplying and painting two coats new iron work such as steel doors ventilators, window bars etc., (WITHOUT PRIMER) |
| 16 | Emulsion Painting two coats with approved quality of including cost and conveyance of all materials etc. complete as per standard specifications. |
| 17 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for overall quoted amount (for Construction) above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender