Tender for TGGENCO - KTPS-VII Stage - CHP-MM-II -Procurement of metal filling electrodes and dissimilar electrodes - Quotation called for - Regarding.

Sharing tender

TGGENCO - KTPS-VII Stage - CHP-MM-II -Procurement Of Metal Filling Electrodes And Dissimilar Electrodes - Quotation Called For - Regarding. , CGS 680 (Presently WUNDER 680) Electrodes - High-Alloy Steel Manual Electrode (Austenitic-Ferritic Stainless Steel). Mech Properties: Tensile Strength - 120,000 PSI (827 Mpa), Yield Strength - 79,000 PSI (545 Mpa), Elongation - 25-35%, Machinable Deposits, Work-Hardens Under Pressure. Weld Deposit: Controlled Grain Structure, High Resistance To Hot And Hydrogen-Induced Cold Cracking, Self-Releasing Slag, Smooth Welds. Composition: C 0.7-1.2%, Mn 12-16%, Si 0.5-1.5%, Cr 3-6%, Fe Balance. Weldability: Spray Transfer, Stable Arc, Low Spatter, Low Amperage, All-Position Welding, Frigidarc Coating. Operating: AC/DC, U/V/X Joint Prep, Preheat As Per Carbon Equivalent. Standards: AWS / AS/NZS Equivalent (AWS E7024). Applications: Joining Dissimilar Steels, Tool/Die Repairs, Gear Teeth, Shafts, Buttering For Hardfacing (Earthmoving/Mining). Features: Crack, Corrosion And Oxidation Resistance. MAKE: ADOR FONTECH (LH106SMP) / D And H / EWAC (WUNDER 680, Formerly XUPER 680 CGS) / ESAB. , E 6517 Electrode (Tribotuf 6517) - Hardfacing Electrode. Composition And Structure: Tic-Reinforced Martensitic Alloy, Fine Tic In Martensitic/Austenitic Matrix. Hardness: 52-60 Hrc (Approx 600 BHN). Performance: High Abrasion And Impact Resistance. Weld Properties: Stable Arc, Good Weldability, Suitable For Various Positions. Applications: Hardfacing In Mining/Quarrying, Crusher Hammers/Plates, Coal Pulverizer Parts, Sinter Plant And Cement Plant Liners, Earthmoving Tools. MAKE: ADOR FONTECH (TUFTECH-58) / D And H / EWAC (TRIBOTUF-6517) / ESAB. , Eutectrode 6450 - Basic-Coated High-Performance Stick Electrode (DIN EN 14700: E Fe9). Alloy: Femncr (Iron-Manganese-Chromium). Mechanical Properties: Tensile Strength Approx 80,000-100,000 Psi, Elongation Moderate, Hardness Machinable, Work-Hardens, Metal Recovery Approx 150%. Weld Deposit: High Resistance To Impact, Pressure, Abrasion, Corrosion-Resistant, Easy Slag Removal, Non-Magnetic. Weldability: Stable Arc, All-Position Welding, Minimal Spatter, AC Or DC (DCEP). Applications: Surfacing/Repair Of Manganese Steels And Dissimilar Steels - Crusher Jaws/Cones, Excavator Parts, Crane Rails, Chain Wheels, Rollers, Wheel Flanges, Blow Bars. Features: High Efficiency, Corrosion Resistance, Versatility. MAKE: ADOR FONTECH (LH-713) / D And H / EWAC (EWACTRODEBU-6450) / ESAB.