Tender For Additional Work Including Panelling For Newly Constructed Dfos Residence At Zangli, Kupwara Under Ut Capex Budget 2026-27
Tender Value
14.98 Lakhs
Estimated cost
Bid Submission
02 Oct 2026
5 days left
EMD
44959
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Additional Work Including Panelling For Newly Constructed Dfos Residence At Zangli, Kupwara Under Ut Capex Budget 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar by using machine cut for door entry. |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :Of area beyond 3 sqm. |
| 4 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead :Of sectional area 40 sqcm. and above. |
| 5 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in room fill,trenches,foundation etc. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 8 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 9 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Kd or equivalent |
| 10 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.KD Wood or Equivalent.35mm |
| 11 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 12 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm |
| 13 | CEMENT PLASTER (IN FINE SAND)12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 14 | CERAMIC GLAZED TILESProviding and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 15 | VITRIFIED FLOOR TILESProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 16 | Providing and fixing wooden panelling 12mm thick over framming work of required pattern and design water proof strips of ply board imported wood panelling for ceiling/ walling(imported wood/RAIT wood) incl ply wood framing. |
| 17 | Providing and fixing plywood made of commercial quality ISI marked plywood of 12 mm thick, conforming to IS:303, termite and borer resistant, boiling water-resistant (BWR grade), waterproof with smooth both-side finish. The plywood shall be cut, dressed, jointed, and fixed in proper alignment over the supporting framework as per approved design and directions of the Engineer-in-charge, complete in all respects |
| 18 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately.Chaar Gul |
| 19 | Providing and fixing approved quality premium vinyl/PVC washable wallpaper of approved shade, texture and pattern, having minimum 300 GSM thickness with paper/non-woven backing, moisture resistant, anti-fungal, stain resistant and scrubbable finish, fixed over properly prepared smooth wall surface using recommended adhesive, including surface preparation, cutting, matching of patterns, edge finishing, necessary tools, scaffolding, wastage and complete in all respects as per approved design and direction of Engineer In-charge. |
| 20 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 21 | Providing and fixing PVC False Ceiling straight or curve any profile of reputed make which includes G.I. Perimeter Channels of size 0.55mm thick (having One Flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall / partition with the help of Nylon sleeves and screws at 610mm centres. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two flanges of 15mm each) from the soffit at 900mm centres with ceiling angle of width 25mm X 10mm X 0.55mm thick fixed to soffit with G.I. cleat and steel expansion fasteners. Ceiling section of 0.55mm thick having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 457 mm with a thickness ranging from 7 mm to 9 mm, available in multicolor. The panelling shall be of an imported brand, featuring a core filling with beading for added strength and aesthetic appeal. The PVC panels shall have a fire rating of FR, making them fire-resistant, and shall be fully waterproof, suitable for both interior and exterior applications. The panels shall be UV-resistant, preventing color fading and degradation over time, and shall have high impact resistance to withstand daily wear and tear. The installation shall include all necessary accessories, such as trims, screws, and adhesive, ensuring a secure and seamless finish. The rate shall include complete installation, including cutting, fixing, and carriage up to the site of work, ensuring a high-quality and durable finish. |
| 22 | WOODEN FLOORINGWooden planking, tongued and grooved in flooring including fixing with iron screws complete:15 mm thick Second class teak wood |
| 23 | DEVRI STONE WORKProviding and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing.Fine chisel dressed |
| 24 | Providing and fixing glass panes with required beading and glazing clips in doors, windows, clerestory windows, all complete with : 3mm glass panes |
| 25 | “Providing and fixing decorative wooden jali for windows made from premium quality imported German wood , using 1.5 inch (38 mm) thick sections, including all necessary teak wood framing, grooves, molding, cutting, carving/jali pattern work, screws, nails, adhesives, polishing/melamine finish, protective coating against termites and moisture, complete in all respects as per approved design, drawing and direction of Engineer In-charge |
| 26 | Supply and installation of complete wardrobe including framework, shelves, hanging rods, drawers, doors, glazed doors, door hardware, accessories and lightings. the wardrobe framework will be constructed using 19mm thick plywood with necessary lining, necessary shelves and S.S hanging rods. the door shutters will be made of 25mm thick pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade | Type ||) having one side decorative lamination and other side a balancing lamination of glazed shutters all as per the directions of Engineer Incharge complete. |
| 27 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm. |
| 28 | Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I / C.I pipes 100 mm dia. Pipe, |
| 29 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. |
| 30 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 31 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 32 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 33 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge (a) 15 mm nominal dia |
| 34 | Providing and fixing pvc pipes class c pipe incl soil waste and vent pipes — 100 mm dia |
| 35 | Providing and fixing pvc pipes class c pipe incl soil waste and vent pipes — 75 mm dia |
| 36 | Providing and fixing 3 layer PP-R (Polypropylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.PN-16 pipe , 25mm OD(SDR-7.4) providing and fixing of 50% of item above |
| 37 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.PN-16 pipe, 40mm OD (SDR-7.4) |
| 38 | P/F of Geysers 50-Litre 2000-Watt Storage Water Heater (White) incl. all fittings and fixtures make: venus, jacquar , racold or equivalent. |
| 39 | Providing & Fixing PVC ( Prince Make) following fittings complete — Door Tee 100mm size |
| 40 | Providing & Fixing PVC ( Prince Make) following fittings complete — Door Tee 75mm size |
| 41 | Providing & Fixing PVC ( Prince Make) following fittings complete — PVC collar 100mm |
| 42 | Providing & Fixing PVC ( Prince Make) following fittings complete — PVC collar 75mm |
| 43 | Providing & Fixing PVC ( Prince Make) following fittings complete — Plain Bend 100 mm size |
| 44 | Providing & Fixing PVC ( Prince Make) following fittings complete — Plain Bend 75 mm size |
| 45 | Providing & Fixing PVC ( Prince Make) following fittings complete — Door bend 100mm |
| 46 | Providing & Fixing PVC ( Prince Make) following fittings complete — Door bend 75mm |
| 47 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore |
| 48 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 49 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 50 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 51 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box nd earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 52 | Wiring for light/power plug points (15/16A heating points) with 2x4sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC Insulated copper conductor single core cable for earthing, etc. as required. (Havells/Polycab/ Anchor/ Finolex/KEI/RR or equivalent) including the cost of conduit. |
| 53 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including conduit as required. 32mm |
| 54 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 55 | Supply and fix LED Bulb 18W,230V Energy Efficient lamp Make : PHILLIPS, SURYA, SYSKA |
| 56 | Supply and installation of 300 mm, 900 RPM, single-phase heavy-duty exhaust fan, including wiring, mounting frame, and testing. Make: Crompton / Havells / Equivalent |
| 57 | Carriage of different materials by Mechanical transport incl. loading, unloading and for stacking at site @ 30KM — Sand |
| 58 | Carriage of different materials by Mechanical transport incl. loading, unloading and for stacking at site @ 30KM — Steel |
| 59 | Carriage of different materials by Mechanical transport incl. loading, unloading and for stacking at site @ 30KM — Cement |
| 60 | Carriage of different materials by Mechanical transport incl. loading, unloading and for stacking at site @ 30KM — Bricks |
| 61 | Carriage of different materials by Mechanical transport incl. loading, unloading and for stacking at site @ 30KM — Aggregate |
| 62 | Carriage of different materials by Manual labour incl. loading, unloading and for a lead of 100 mt — Sand |
| 63 | Carriage of different materials by Manual labour incl. loading, unloading and for a lead of 100 mt — Steel |
| 64 | Carriage of different materials by Manual labour incl. loading, unloading and for a lead of 100 mt — Cement |
| 65 | Carriage of different materials by Manual labour incl. loading, unloading and for a lead of 100 mt — Bricks |
| 66 | Carriage of different materials by Manual labour incl. loading, unloading and for a lead of 100 mt — Aggregate Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender