Tender for procurement of furniture for hostel block of idtr ghaink.

Sharing tender

procurement of furniture for hostel block of idtr ghaink. , hostel study table : providing and placing overall size:- length:900mm, width: 600mm, height 750mm. c- frame & tubular cold rolled close annealed steel structure. fabrication involves only mig welding process. top- size :- 900x600x18 mm thk. pre laminated particle board. side edges covered by 2 mm thick pvc edge beading by through feed machine.. modesty- 0.8 mm thk. ,200 mm ht. crca sheet dotted embossed panel at visitor’s side. tie members- horizontal tie members 25x25x1.2 mm thk. crca pipe. for rigid joint of frame structure threaded 4 mm thick sleeve welded in tie members. footrest- footrest made of 20x40x1.20 mm thk crca pipe. single drawer - w-350mm, h-165mm d-475mm. with ebco make teliscopic channel for sliding of drawers. multipurpose locks use for locking. side frame- side frame c - section pressed formed 1 mm thk.crca sheet welded with 25x50x1.20 mm thk pipe. cap & levellers- all pipe caps are curved ppcp material. 4 nos of drum type leveller has been provided at bottom for mentaining level. it also preventing scratches on floor & product as well. construction- the product comes in knock-down conditional for ease of transportation. finish- no sharp edges in the prodect. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface and also product should be en iso 3834-2:2021. as per the engineer incharge tolerence should be 10-20mm +/_ , metal bunk bed : providing and placing a bunk bed overal- size:- length:1980mm, width: 910mm,sleeping h:450mm,and second person sleeping height:1770mm, made out of prime quality cold rolled closed annealed sheet & tubes. horizontal frame made out of prime quality 1.0mm thick. press form cold rolled close annealed sheet. vertical frame made out of prime quality cold rolled closed annealed tube dia 38x1.6mm thick. only mig/tig and spot welding for fabrication. top of bed is 18mm thick comercial ply. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface and also product should be en iso 3834-2:2021. as per the engineer incharge tolerence should be 10-20mm +/_ , chair : provinding and placng a chair size:-overall h: 830mm,seat h: 460mm,d: 530mm,w: 560mm: . frame oval tube 13x31-16 gauge, under structure made of ms cold rolled close annealed capsule pipe frame 1.2 mm thick, duly powder coated after anti corrosion treatment of surface. seat and back should be in metal sheet size 0.4-0.6mm thick tolerence 0.2-0.4 +/_ with powder coated also product shold be en iso 3834-2:2021. as per the engineer incharge tolerence should be 10-20mm +/_ , mattress single : providing and supplying good quality single bed mattress of size 36” × 78” (915 × 1980 mm) and thickness 4” (100 mm), made of good quality high-density pu foam of suitable density, covered with good quality 100% cotton/polyester-cotton fabric, properly stitched and finished, with uniform thickness and firmness throughout, free from defects, complete in all respects including material, stitching, transportation, loading, unloading and all incidental charges, as per specifications and as directed by the engineer-in-charge. brand : refresh / godrej/sleepwell , pillow : providing and supplying good quality standard pillows, size 18” × 27” (45 cm × 68 cm), filled with clean, hygienic and odourless polyester fibre/siliconized hollow polyester fibre of suitable density, covered with good quality 100% cotton fabric, properly stitched with double seams and finished edges, including all materials, labour, transportation, loading, unloading and all incidental charges, complete in all respects as per specifications and as directed by the engineer-in-charge. brand : refresh/godrej/sleepwell , pillow cover : providing and supplying pillow covers made of good quality cotton cloth, duly stitched, with proper seams and finished edges, complete in all respects as directed by the engineer-in-charge of size 18 x 27. , bed sheet single : providing and supplying good quality single bed sheets made of 100% cotton fabric, size 60” × 90” (150 × 225 cm), pre-shrunk and colour-fast, having minimum 144 thread count and approximately 120–150 gsm, neatly woven and finished with properly hemmed edges, free from defects, stains and loose threads, complete in all respects including material, stitching/finishing, transportation, loading, unloading and all incidental charges, as per specifications and as directed by the engineer-in-charge. make: bombay dyeing, spaces, ddecor, raymond home, mytrident, jaipur fabric, divine casa, swayam, monte carlo , quilt single : special feature breathable, elegant designs, reversible, skin friendly, soft comfort & luxury- indulge in the ultimate comfort with the urban comfort comforter—featuring a 144- thread-count cover for a luxurious touch. its premium quality and plush design ensure optimal warmth and breathability with a 120 gsm polyester filling. this thoughtfully designed comforter not only enhances your bedroom decor but also stands as a durable companion to your nightly retreats. immerse yourself in the plush embrace of urban comfort, where every thread tells a story of style, resilience, and a sanctuary for restful nights and rejuvenating sleep. package contains - 1 single size comforter 226 cm x 152 cm or 89 inches x 60 inches. easy care - machine wash in warm water using mild detergent and tumble dry on low, do not use bleach, recommended drying immediately. we value you - we do follow the fine quality-making process that gives us 100% confidence in our product and we provide complete satisfaction to our customers as we value you the most. please feel free to reach out to us! makes: bombay dyeing, trident, ddecor, raymond home,divine casa, wakefit, jaipur fabric, monte carlo , mattress cover : providing and supplying good quality removable mattress covers with concealed/covered zipper, suitable for single bed mattress of size 36” × 78” × 4” (915 × 1980 × 100 mm), made of durable, washable and colour-fast polyester-cotton/cotton fabric, properly stitched with double seams and reinforced at corners, having a strong concealed zipper for easy removal and refitting, complete in all respects including fabric, stitching, zipper, transportation, loading, unloading and all incidental charges, as per specifications and as directed by the engineer-in-charge. , 3 seater visitor bench : providing and placing a visitor - 3 seater benchdimension- over all sizes- 1835mm x 644mm x 794mm (l x w x h). seat & back- 3 individual perforated seat & back of 500 mm width. made of 1.2 mm thick ms cold rolled close annealed press formed sheet components duly seamless welded to get proper finish. . seat & back joined together with help of 3 mm thick l-plate. under structure- made up of oval pipe 75x25x2 mm thick ms pipe. 3 mm thick ms bracket welded for seat mounting. handle- made up of 15x30x1.6 mm thick ms rectangular pipe. pvc handle cover 350x40x3 mm thick provided on handle for providing more comfort. cap & levellers- oval pipe is covered with 2 nos of specially designed pvc cap. 4 nos of pvc cap & 4 nos of pvc gromet has been provided at bottom for preventing scratches on floor & product as well. construction- the product comes in knock-down conditional for ease of transportation. finish- all steel components are epoxy powder coated followed by seven tanks anti corrosion pre-treatment of surface. tolerence 5-10 mm +/_ also product shold be en iso 3834-2:2021. as per the engineer incharge , centre table : providing and placing a centre table- size: length: 1200mm, width: 600mm, height: 450mm. top made up from 18mm plywood with laminate / 12mm clear float glass as approved by engineer-in-charge. , sick room single metal bed : providing and placing a steel bed- size:- length:1950mm, width: 900mm, height:400mm, made out of prime quality cold rolled close annealed sheet & tubes. body parts made out of prime quality 0.8mm thk. press form cold rolled close annealed sheet. use only mig/tig & spot welding for fabrication. headrest & footrest made out of 32 round 1.2mmcrca tube. top of bed is ms cold rolled close annealed sheet. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface also product shold be en iso 3834-2:2021. as per the engineer incharge , study table : providing and placing overall size:- length:900mm, width: 600mm, height 750mm. c- frame & tubular cold rolled close annealed steel structure. fabrication involves only mig welding process. top- size :- 900x600x18 mm thk. pre laminated particle board. side edges covered by 2 mm thick pvc edge beading by through feed machine.. modesty- 0.8 mm thk. ,200 mm ht. crca sheet dotted embossed panel at visitor’s side. tie members- horizontal tie members 25x25x1.2 mm thk. crca pipe. for rigid joint of frame structure threaded 4 mm thick sleeve welded in tie members. footrest- footrest made of 20x40x1.20 mm thk crca pipe. single drawer - w-350mm, h-165mm d-475mm. with ebco make teliscopic channel for sliding of drawers. multipurpose locks use for locking. side frame- side frame c - section pressed formed 1 mm thk.crca sheet welded with 25x50x1.20 mm thk pipe. cap & levellers- all pipe caps are curved ppcp material. 4 nos of drum type leveller has been provided at bottom for mentaining level. it also preventing scratches on floor & product as well. construction- the product comes in knock-down conditional for ease of transportation. finish- no sharp edges in the prodect. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface and also product should be en iso 3834-2:2021. as per the engineer incharge tolerence should be 10-20mm +/_ , mattress single : providing and supplying good quality single bed mattress of size 36” × 78” (915 × 1980 mm) and thickness 4” (100 mm), made of good quality high-density pu foam of suitable density, covered with good quality 100% cotton/polyester-cotton fabric, properly stitched and finished, with uniform thickness and firmness throughout, free from defects, complete in all respects including material, stitching, transportation, loading, unloading and all incidental charges, as per specifications and as directed by the engineer-in-charge. brand : refresh / godrej/sleepwell , pillow : providing and supplying good quality standard pillows, size 18” × 27” (45 cm × 68 cm), filled with clean, hygienic and odourless polyester fibre/siliconized hollow polyester fibre of suitable density, covered with good quality 100% cotton fabric, properly stitched with double seams and finished edges, including all materials, labour, transportation, loading, unloading and all incidental charges, complete in all respects as per specifications and as directed by the engineer-in-charge. brand : refresh/godrej/sleepwell , pillow cover : providing and supplying pillow covers made of good quality cotton cloth, duly stitched, with proper seams and finished edges, complete in all respects as directed by the engineer-in-charge of size 18 x 27. , bed sheet single : providing and supplying good quality single bed sheets made of 100% cotton fabric, size 60” × 90” (150 × 225 cm), pre-shrunk and colour-fast, having minimum 144 thread count and approximately 120–150 gsm, neatly woven and finished with properly hemmed edges, free from defects, stains and loose threads, complete in all respects including material, stitching/finishing, transportation, loading, unloading and all incidental charges, as per specifications and as directed by the engineer-in-charge. make: bombay dyeing, spaces, ddecor, raymond home, mytrident, jaipur fabric, divine casa, swayam, monte carlo , quilt single : special feature breathable, elegant designs, reversible, skin friendly, soft comfort & luxury- indulge in the ultimate comfort with the urban comfort comforter—featuring a 144- thread-count cover for a luxurious touch. its premium quality and plush design ensure optimal warmth and breathability with a 120 gsm polyester filling. this thoughtfully designed comforter not only enhances your bedroom decor but also stands as a durable companion to your nightly retreats. immerse yourself in the plush embrace of urban comfort, where every thread tells a story of style, resilience, and a sanctuary for restful nights and rejuvenating sleep. package contains - 1 single size comforter 226 cm x 152 cm or 89 inches x 60 inches. easy care - machine wash in warm water using mild detergent and tumble dry on low, do not use bleach, recommended drying immediately. we value you - we do follow the fine quality-making process that gives us 100% confidence in our product and we provide complete satisfaction to our customers as we value you the most. please feel free to reach out to us! makes: bombay dyeing, trident, ddecor, raymond home,divine casa, wakefit, jaipur fabric, monte carlo , mattress cover : providing and supplying good quality removable mattress covers with concealed/covered zipper, suitable for single bed mattress of size 36” × 78” × 4” (915 × 1980 × 100 mm), made of durable, washable and colour-fast polyester-cotton/cotton fabric, properly stitched with double seams and reinforced at corners, having a strong concealed zipper for easy removal and refitting, complete in all respects including fabric, stitching, zipper, transportation, loading, unloading and all incidental charges, as per specifications and as directed by the engineer-in-charge. , stretcher : material mild steel with top ss size 213 cm (l) x 56 cm (w) x 81 cm (h) castor diameter millimetre 15 cm number of wheels 4 rustproof yes surface finishing epoxy and powder coated length 1500-1800 mm width 433 -550 mm tolerence 10-20mm +/_ , glass almirah : providing and supplying a glass almirah overall size:-height:1980mm, width:910mm depth:380mm body part made-up of prime quality cold rolled close annealed sheet use only mig/tig & spot welding for fabrication.5 adjustable shelf. three way locking device with six levers superior quality lock for door . doors made of press formed ms cold rolled close annealed sections with 4mm glass. doors are mounted on steel hinge brackets. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. tolerence 5-10 mm +/_ also product shold be en iso 3834-2:2021. as per the engineer incharge , locker main unit with 6 door- size:- height:1950mm, width:380mm, depth:450mm ( 6 door), body part made-up of prime quality cold rolled close annealed sheet of 1mm & 0.8mm thickness, use only spot welding for fabrication. knockdown constructions, individual compartment having individual door, with six levers superior quality lock. special holes are provided in doors for ventilation. doors are mounted on pivot with steel handle. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.tolerence 5-10 mm +/_ also product shold be en iso 3834-2:2021. as per the engineer incharge , locker add-on unit with 6 door- size:- height:1950mm, width:380mm, depth:450mm ( 6 door), body part made-up of prime quality cold rolled close annealed sheet of 1mm & 0.8mm thickness, use only spot welding for fabrication. knockdown constructions, individual compartment having individual door, with six levers superior quality lock. special holes are provided in doors for ventilation. doors are mounted on pivot with steel handle. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.tolerence 5-10 mm +/_ also product shold be en iso 3834-2:2021. as per the engineer incharge , bp machine digital : providing and supplying digital automatic blood pressure monitor (bp machine), upper-arm type, suitable for measurement of systolic blood pressure, diastolic blood pressure and pulse rate, having automatic inflation and deflation, large and clearly readable digital lcd display, clinically validated measurement accuracy, suitable adult cuff, memory facility for storing previous readings, irregular heartbeat detection and automatic power-off function, complete with batteries/adapter, cuff and all necessary accessories, ready for use, as per specifications and as approved by the engineer-in-charge. , electronic thermometer : providing and supplying digital electronic clinical thermometer suitable for measurement of human body temperature, with high-accuracy digital sensor, clear lcd display, fast temperature measurement, audible fever/measurement completion alarm, memory/last-reading recall facility, automatic switch-off and low-battery indication, having flexible/rigid probe suitable for oral, axillary or rectal use, complete with batteries, protective storage case/cap and user instructions, ready for use, as per specifications and as approved by the engineer-in-charge. , mercury thermometer : providing and supplying standard mercury-in-glass clinical thermometer for measurement of human body temperature, having clear graduated scale, suitable for oral/axillary use, with temperature range of approximately 35°c to 42°c and graduation of 0.1°c, enclosed in a protective transparent case, with permanent markings and complete with all accessories, conforming to applicable standards and requirements, complete in all respects as approved by the engineer-in-charge. , 4-seater table : providing, supplying and placing of good quality 4-seater dining table, overall size 1200 x 900 x 750 mm completely made of frb (fibre reinforced board) material, including table top, legs, supporting members/frame, bracing/reinforcement, edge finishing, joints, fasteners and all other components, complete in all respects as per approved design, dimensions, sample and directions of the engineer-in-charge. , dining chairs : dimension- size: total height-820mm, width 500mm, depth-460mm,seat height-450mm. under structure- made out of ms cold rolled close annealed tube ø19mmx1.6mm thick. fitted with pvc moulded shell. seat & back- one piece pp molded shell with ergonomic seeting contoure. cap & levellers- all pipe caps are covered specially designed pvc dom cap. 4 nos of pvc cap has been provided at bottom for preventing scratches on floor & product as well. construction- chair shell & under structure is in knock-down conditional for ease of transportation. finish- all steel components are epoxy powder coated followed by seven tanks anti corrosion pre-treatment of surface. the overall appearance of the product shall be as per photograph.tolerence 5-10 mm +/_ also product shold be en iso 3834-2:2021. as per the engineer incharge