Tender For Replacement Of One Motor For Lift Irrigation Scheme Verinag.
Tender Value
10 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
2 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of One Motor For Lift Irrigation Scheme Verinag.
BOQ
| Sl. No. | Item Description |
| 1 | Design, Manufacture, Supply, Installation, Testing & Commissioning of Horizontal Centrifugal Pumping unit to be installed at the existing Lift Irrigation Scheme Verinag. The pumping unit shall have the following specifications:-PUMP:-Make = Reputed Make (M&P/Kirlosker/KSB/Sintech/Flow more or equivalent)Discharge = 2.5 Cusec (0.07079 m3/sec)Dynamic Head = 56 m.Speed = 1480 RPMType of pump = Horizontal Split Casing Centrifugal.NPSH A at site = 3.60 m MATERIAL OF CONSTRUCTION:Impeller = Bronze grade V of IS : 318 or CF-8MWearing Ring = Bronze grade V of IS: 318Impeller Shaft = Stainless Steel AISI 410Gland = Bronze grade V of IS: 318Fasteners = High tensile SteelShaft Sleeve = Stainless Steel AISI 410Pump Casing = Close fine grained Cast Iron conforming to IS:210 Grade 20Coupling = Tyre coupling of suitable sizeBase frame =M.S fabricated as per IS 2062Motor Specifications:- Type---------------Horizontal Type Squirrel Cage Induction MotorNo of phases-------------------------03Horse Power----------------------as per design but not less than 85 HPSpeed---------------------------------1480 RPMEnclosure-----------------------------TEFCRated Voltage------------------------415 ±10%Rated Frequency--------------------50±3%Class of Insulation---------------------“F”Temperature Rise------------ Limited to class BType of Duty--------------------------ContinuousMotor efficiency .......... ≥IE2 Make/(BHEL/Marthon/Crompton/Kirlosker/Jhoti/Havells/ABB or equivalent .)The job includes coupling of the Motor with the Pump by way of providing and fitting of a suitable size tyre coupling with allied works and necessary modifications required, if any for fitment of the Pump Motor assembly to existing delivery and suction of diameter 150mm and 125mm respectively. The job includes costs on account of all duties, taxes, freight, transportation, transit insurance, handling, tools and tackles and consumables required for carrying out the said job and dismantling of old worn-out equipment.Note: The Pumping unit shall have to be got inspected by the Third Party Inspection Agency namely CEIL/EIL/Rites etc and the Certificate of the same shall be provided at the time of the supply of the equipment, for which the scope has been kept in the estimate cost. The equipment must be supplied this test certificates and pump curves/QAP need to be uploaded at the time of tendering. The Govt. Circular of Finance Department issued vide No. DGAT/PS/DR/7865508/86 Dated: 06-03-2026 shall be applicable. |
| 2 | Providing, Fitting, Installation, Testing and Commissioning of Priming Sewage Submersible pump of 1 HP capacity Kirloskar/Crompton/KSB/Mather plate make for priming purpose of Pumping units with following specifications : a.Type ------ Sewage submersible b.Head ------ suitable for 6 Mtrs.c. Phase /Voltage ------ 1 phase , 220 +/-10% Vd. Power/RPM ------ 1 HP/2900The priming pump shall be suitable for operation under submerged conditions and shall be suitable for wide water level fluctuations taking place in suction side. The job shall include providing of PVC Flexible Pipe (10 M) of required size including fitting like ball valve, Nipples, clamps, Elbows/Bends as required for priming of the pumping units and complete installation as required. The job also includes suitable capacity compact starter and P/F of 6mm Sq. Submersible cable=10 metres Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender