Tender For Work Of Contruction Of 33 Kv Bharwara Stp Bay At 220 Kv Sub-Station,Satrikh Road Under Elctricity Transmission Division-Ii Lucknow
Tender Value
6.62 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
4 days left
EMD
7000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Of Contruction Of 33 Kv Bharwara Stp Bay At 220 Kv Sub-Station,Satrikh Road Under Elctricity Transmission Division-Ii Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Following works are to be carried out at 220 KV S/S Satrikh Road , Lucknow for the construction of new 33 KV BHARWARA STP Bay\\" along with associated works including all cost of men, misc, consumables, T&P, Crane etc. to complete the Job satisfactorily |
| 2 | PART- A : - WORK |
| 3 | carriage work |
| 4 | Safe carriage of the following equipments including loading and unloading on trucks duty arranged by the Contractor from Stores of different sub-station of Lucknow to 220 KV Sub-Station Satrikh Road, Lucknow. |
| 5 | Carriage of 33 KV CT/PT/Isolator |
| 6 | Carriage of 33 KV VCB |
| 7 | Carriage of various size Control Cable (2KM) |
| 8 | Erection of Lattice type main and auxiliary structures with other associated works to complete the job as per required as per technical specification of UPPTCL EKR-04 No,BEAM-02,PEAK-04,MAST-4, ALP-6 No., ABL-3 No. |
| 9 | Laying & stringing of 33kv jack bus of Moose/Zebra/panther conductor having length 12m(01 job for each phase) |
| 10 | Erection of following Equipments as per instruction manual and technical specifications including shifting of materials from Central Stores/ Site Store to Erection Site including all associated works. |
| 11 | 33 KV VCB with structure |
| 12 | 33 KV CT (400-200/1/1/1) |
| 13 | 33 KV CT Junction Box. |
| 14 | 33 KV PТ |
| 15 | 33 KV PT Junction Box. |
| 16 | 33 KV BI without earth blade |
| 17 | 33 KV LI with earth blade |
| 18 | Jumpering with ACSR Moose/Zebra Conductors from 33 K.V. Main Bus Bar / Jack Bus Bar Conductors to Main Bus/Jack Bus Isolators of 33 K.V. Feeders / by due cutting & bending of conductors and tightening of jumpers with P.G. Clamps, connectors along with shifting of the conductors, PG Clamps, connectors from stores at the Sub Station to the switchyard. |
| 19 | Cutting, Straightening and Laying 700 mm below inside ground & above ground of 40 mm dia size M.S. Flats (to be provided by the department) as per requirement for Earthing of newly erected equipments and Structures as above including welding with main Earthmat and with the object to be earthed including excavation, backfilling, painting of the Earthmat above ground level in Bus Green colour including all other associated works to complete the job satisfactorily as per Technical Specifications. |
| 20 | Earthing of Aux. Structures and Equipments with 50X6 mm size M.S. Flat |
| 21 | Earthing of cable trenches with 25X6 mm size M.S. Flat |
| 22 | Painting of Earthing strips above ground level with one coat of Red oxide and two coat of synthetic/ enamel paint and with bus green paint below ground level as per details below: |
| 23 | 50x6 mm (in green color) |
| 24 | 25x6 mm (in green color) |
| 25 | Laying of following sizes Control Cables in the Cable Trenches from Control and Relay Panels in Control Room to various Equipments, Junction Box etc. in Switchyard as per cable schedule, its sddling with 25X3 mm size including carriage of Cable Drums from Stores to work site & shifting back to stores including all other associated works required for the satisfactorily completion of the Job as per technical specification. |
| 26 | Laying of 2CX2.5 sq. mm size Control Cable |
| 27 | Laying of 4CX2.5 sq. mm size Control Cable |
| 28 | Laying of 6CX2.5 sq. mm size Control Cable |
| 29 | Interconnection & termination of the above laid control cables between Control and Relay Panels & erected equipments i.e. CB, СТ, СТ Junction Box, PT, PT Junction, box. Including making necessary holes in Gland Plates or Boxes whereever required along with supply of Cable glands of appropriate size and providing of Ferrules for each core of the cables & its termination with crimping type Copper Lugs alongwith preparation of interconnection Drawing and Commissioning of the Panel/ Feeders in co-ordination with T&C Wing including providing 02 sets of Hard Copies of as executed Interconnection Drawing including all other associated works required for the satisfactorily completion of the Job as per technical specification. (01 Job for Each Bay) |
| 30 | Pilfer proof Metering |
| 31 | Pilfer proofing of the cable with GI Pipe of size 2 inch complete with cutting, bending, making thread etc including elbow and other required material from 33KV switchyard to control room including all other works which are required for completion of work. (Control Cable provided by deptt.) |
| 32 | Erection of SAMAST Energy Meter and Data Communication work |
| 33 | Installation of 3P4W, 0.2s accuracy class Interface Energy Meters (one Main and check Meter) |
| 34 | Necessary interconnection from data transmission of already Installed SAMAST compliant meters to Lan switch upto DCU/Gateway and all other H/W, S/W per No. |
| 35 | Installation of communication cable (CAT-6 alongwith necessary hardware whereever required in between Energy meter to Lan switch to SDH equipments upto DCU/Gateway and all other H/W, S/W per No. |
| 36 | Integration of this 33kv bay in existing SCADA system |
| 37 | 33kV bay (01no.) integration at the existing Siemens make IEC 61850 based SCADA system |
| 38 | Supply and installation of fiber optics patch cords/LIUs and splicing work to make BCUs communication with existing fiber ring system. |
| 39 | PART- B : - SUPPLY |
| 40 | Supply of 5 No. U-Bolted type Single Tension Fitting Assembly with Turn Buckle, suitable for Twin ACSR Moose/Zebra Conductors and 33 K.V. Bus Bar Disc Insulator String, comprising of 4 No. 70 kN disc insulators, complete with hardware fittings, D-shackle, socket eye, ball hook, yoke plate, D-clip, tension clamp etc. as per technical specifications and sample. |
| 41 | Supply of 5 No. U-Bolted type Single Tension Fitting Assembly without Turn Buckle suitable for single ACSR Moose/ Zebra Conductors and 33 K.V. Bus Bar Disc Insulator string, comprising of 4 No. 70 kN disc insulators, complete with hardware fittings, D-shackle, socket eye, ball hook, yoke plate, D-clip, tension clamp etc. as per technical specifications and sample. |
| 42 | Supply of 33 K.V. Bus Isolator Bi-Metallic Terminal Connector suitable for ACSR Moose/Zebra Conductor duly made of LM-6 aluminum alloy complete with 4 Nos. 12 mm size dia. holes with Hot Dip G.I. Nut & Bolts and Spring / Plain Washers as per technical specifications and sample. |
| 43 | 33 K.V. CB. Bi-metallic Clamp duly made of Aluminium Alloy (LM 6), suitable for 33 K.V. CBs and ACSR 'Moose/Zebra' Conductor, complete with HDG Bolts - Nuts - Washers, as per sample. |
| 44 | 33 K.V. C.T. Bi-metallic Clamp duly made of Aluminium Alloy (LM 6), suitable for 33 K.V. CTs and ACSR Moose/'Zebra' Conductor, complete with HDG Bolts - Nuts - Washers, as per sample. |
| 45 | Supply of 150Watt LED street Light Luminaries fittings of Philips/Cromton Greaves/Havells/ Bajaj make in piece dia. cast aluminium alloy housing with pot optics reflector and toughened clear glass cover with frame from lamp compartment including cable termination port. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender