Tender For Providing Of 400 Kva Transformer For Cadet Amenities At Ota Gaya Under Ge Gaya
Tender Value
42.71 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
16 days left
EMD
85500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gaya → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of 400 Kva Transformer For Cadet Amenities At Ota Gaya Under Ge Gaya
BOQ
| Sl. No. | Item Description |
| 1 | Supply, laying, commissioning and testing or passing through pipe, XLPE insulated, screened, armoured, electric power UG cable (Heavy duty) with aluminium conductor, 11000 volts grade in duct / trenches of nominal cross sectional area 95 sqmm 3 core complete all as specified and directed . |
| 2 | Supply, layin, commissioning and testing or passing through pipe, XLPE insulated, armoured, electric power UG cable (Heavey duty) with aluminium conductor, 1100 volts grade in duct/ trenches for small length for extension/ replacement of the detective cable of nominal cross sectional area 400 sqmm 4 core including brass compression cable gland terminal aluminium lugs etc making connection and testing complete all as specified and directed.Note:- Pipes and bricks for protection mild steel clamp nut and bolts sand cushioning shall be measured and paid separately. |
| 3 | All as per item No. 02 above but for cable of size 3.5 core 240 sqmm complete all as specified and directed. |
| 4 | All as per item No. 02 above but for cable of size 3.5 core 185 sqmm complete all as specified and directed. |
| 5 | All as per item No. 02 above but for cable of size 4 core 10 sqmm complete all as specified and as directed. |
| 6 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for laying of pipe, cable, foundation of electric pole etc and getting out in soft/loose soil, complete all as specified and directed. |
| 7 | All as per item No. 06 above but exceeding more than 1.5 m in depth complete all as specified and directed. |
| 8 | Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning/ protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. |
| 9 | Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed. |
| 10 | Removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed. |
| 11 | Supplying and laying un-reinforced precast concrete cable cover, class HVP, type 1 with peak, size 300mm x 180mm x 40mm complete all as specified and directed. |
| 12 | Supply and laying for brick of common burnt clay, sub class 'B' old size laid flat and dry on cables as in cable protection in trenches over cables perpendicular to direction of cables abutting each other complete all as specified and directed. (Note:- Brick size 0.23m x 0.15m x 0.7m) |
| 13 | M & L for PCC 1:4:8 TYPE D-2 using 40 mm graded broken stone aggregate as in mass concrete in foundations etc complete all as specified and directed. |
| 14 | M & L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for coping around the pole strut above ground level and filling in depth of poles including neccassory form work and finishing the surface fair and even without using extra cement complete all as specified and directed. |
| 15 | M & L for PCC 1:2:4 type B-2 using 20 mm graded broken stone aggregate as in mass concrete in foundations of stay and grouting of Lt panel, filling of road cutting etc complete all as specified and directed. |
| 16 | S & F steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-55 11.0 metres long complete with one coat of iron oxide and two coat of silver paint complete all as specified and directed. |
| 17 | M & L for cross arms, bracing supports, clamps back plates angles fabricated from the structural steel section including bolts, nuts, washers, welding, bending, drilling holes for bolts, bent to any required shape of size as indicated or directed, inclusive of one primer coat and two coats of aluminium paint after preparation of surfaces complete all as specified and directed. |
| 18 | supply and fixing for HT 11 KV, out door type gang operated air-break switch with drought out fuse combination suitable for vertical mounting fixed type complete with 12 insulators of rating upto 200 Amps complete including locking arrangements with handle of suitable size of GI pipe complete all as specified and directed. |
| 19 | Supply and fixing lightening arrestors expulsion type complete with all fittings, transmission class, discharge capacity 30 Kilo Amps 11 kv complete all as specified and directed.(Note:- Contractor should submit the following test reports from manufacturer as per In IS: 3070-1965) |
| 20 | Supply and fixing cable jointing kit for 11KV grade cable for outdoor termination hot shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 95 sq mm complete all as specified and directed. |
| 21 | Supply, laying galvanised steel tubing medium grade complete with all fitting of size 100 mm dia for cable protection along with pole across road etc complete all as specified and directed. |
| 22 | Supply, laying galvanised steel tubing light grade complete with all fitting of size 50 mm dia for cable protection along with pole across road etc complete all as specified and directed. |
| 23 | Cutting of walls/ hardstanding for laying cable including match with surface through cement mortar complete with pcc 1:3:6, type C-1, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 24 | Cutting of walls/ hardstanding for laying cable including match with surface through cement mortar complete with pcc 1:3:6, type C-1, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender