Tender For Repairs And Maintenance Work To The Icds At Nehru Street And Bharathiyar Street In Ward No. 74, West Zone, Coimbatore Corporation.Roc.No: 1479/2026/D1(W)
Tender Value
6 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
4 days left
EMD
6000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Maintenance Work To The Icds At Nehru Street And Bharathiyar Street In Ward No. 74, West Zone, Coimbatore Corporation.Roc.No: 1479/2026/D1(W)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the damaged RCC as per directed by the departmental officers CCMC SOR-25-26 Pg.no-3 |
| 2 | Dismantling the damaged Plain cement concrete as per directed by the departmental officers CCMC SOR-25-26 Pg.no-3 |
| 3 | Dismantling the damaged brick work as per directed by the departmental officers CCMC SOR-25-26 Pg.no-3 |
| 4 | Dismantling the damaged Pressed tiles and weathering course as per directed by the departmental officers CCMC SOR-25-26 Pg.no-3 |
| 5 | Earth work excavation for foundation in ordinary soil, light black cotton sandy loam and dry silt including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as directed by the departmental officers with initial lead and lift - 10 m3 CCMC SOR-25-26 Pg.no-3 |
| 6 | Supplying and filling in foundation and basement withWell Gravel in layers of not more than 15 cm thick well rammed watered and compacted etc., complete complying with standard specification. CCMC SOR-25-26 Pg.no-36 |
| 7 | Conveyance of excavated earth and clearing away from site to a lead of 2KM from site etc., complete CCMC SOR-25-26 Pg.no-3 |
| 8 | Plain Cement Concrete1:4:8 (one part of cement, four part of Crushed Stone Sand (M-Sand) and Eight part of coarse aggregates ) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification CCMC SOR-25-26 Pg.no-4 |
| 9 | Plain Cement Concrete1:2:4 (one cement, two Crushed Stone Sand (M Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification CCMC SOR-25-26 Pg.no-4 |
| 10 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc., including strutting 3 m high using mild steel sheets of size 90 cm X 60 cm X and B.G10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size10cm X 6.5cm (spacedat about 90 cmc/c)and supported dycasur in a props of 10 cm to13 cm dia (spacedof75cmC/C)complying with standard specification and directed- 10 m 2 (P & D) Data 38 CCMC SOR-25-26 Pg.no-5 |
| 11 | Suppling and fabricating and placing in position MS (or)R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. CCMC SOR-25-26 Pg.no-8 |
| 12 | Reinforced Cement concrete 1:1.5:3 (one cement,one and half M.sand & three course aggregate) using 20 mm gauge hand broken/and broken granite stone for all RCC items of works excluding centerings huttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. CCMC SOR-25-26 Pg.no-5 |
| 13 | Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230 x 110 x 70 mm (83/4\\"x41/4\\"x23/4\\") including cost of materials and labour charges etc., as per standard specification - 1m3 CCMC SOR-25-26 Pg.no-9 |
| 14 | Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P-Sand)),10 mm thick in all floors including cost and conveyance of all materilas to site and labour chargesetc,completeas per standard specifications CCMC SOR-25-26 Pg.no-9 |
| 15 | Plastering with cement mortar 1:5(One part of Cement and Five part of Plastering Sand (P-Sand))12mm in all floors including cost and conveyance of all materilas to site and labour chargesetc,completeas per standard specifications CCMC SOR-25-26 Pg.no-9 |
| 16 | Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600 x 600 x 8 mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P-Sand)), 20 mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid with out any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work CCMC SOR-25-26 Pg.no-11 |
| 17 | Paving the floor with design Antiskirt ceramic tiles (colour and shadeas directed)of size 305 mm x 305 mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P-Sand)), 20 mm thick laid in-situ and pointed with same coloured cement CCMC SOR-25-26 Pg.no-11 |
| 18 | Dadooing walls with ceramic tiles of sizes 300 mm X 450 mm X 8 mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P-Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed. (Sl.No.360f) CCMC SOR-25-26 Pg.no-11 |
| 19 | Weathering Course with Concrete Broken Brick (S.I.No.278) & (P&D) Data 54.Jelly 20mm gauge in pure slaked lime (nosand tobeadded) over roof slab,the proportion of brick jelly to lime being '32 to12.5 well beated with wood enbeaters forgiving required slope and thicknessas directed by the departmental officers etc., complete.-10 cum CCMC SOR-25-26 Pg.no-10 |
| 20 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar1:3 (One part of Cement and Three part of Plastering Sand (P-Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete CCMC SOR-25-26 Pg.no-10 |
| 21 | Painting two coats for Interior surfacewith approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc completeand including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. (Sl.No.394) CCMC SOR-25-26 Pg.no-12 |
| 22 | Painting two coats for Exterior surfacewith approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc completeand including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. (Sl.No.404) CCMC SOR-25-26 Pg.no-12 |
| 23 | Painting two coats with Ready Mixed Enamel Paint over thenew iron works of approved quality and colour with out priming coat includingthe cost all materials etc.,complete, in all floors. (Sl.No.368) CCMC SOR-25-26 Pg.no-12 |
| 24 | Solid PVC door shutters using 19 Gauge 1gmm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered thick solid PVC sheets. Shutter using smm thick solid PVC sheets for paneling shall rigidly in position including fixed necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rebale for housing the shutter and should have provision to fix AL drops, tower bolt hinges and lock plates inclusive of cost of all materials etc. complete complying with the standard specifications. PWD SOR-25-26 Pg.no-89 |
| 25 | Supply and fixing PVC Water Tank as per directed by the departmental officers PWD SOR-25-26 Pg.no-92 |
| 26 | Supply and Delivery of PVC Pipe as per directed by the departmental officers PWD SOR-25-26 Pg.no-158 |
| 27 | 25mm pvc pipe |
| 28 | 32mm pvc pipe |
| 29 | Supply and Delivery of PVC specials as per directed by the departmental officers PWD SOR-25-26 Pg.no-159 |
| 30 | Coupler |
| 31 | 25mm dia |
| 32 | 32mm dia |
| 33 | Elbow |
| 34 | 25mm dia |
| 35 | 32mm dia |
| 36 | 25mm dia |
| 37 | 32mm dia |
| 38 | 25mm dia |
| 39 | 32mm dia |
| 40 | End cap |
| 41 | 25mm dia |
| 42 | 32mm dia |
| 43 | Reducer |
| 44 | 20mm x 15mm |
| 45 | 25mm x 20mm |
| 46 | 32mm x 25mm |
| 47 | Reducer tee |
| 48 | 20mm x 15mm |
| 49 | 25mm x 20mm |
| 50 | 32mm x 25mm |
| 51 | Reducer Elbow |
| 52 | 20mm x 15mm |
| 53 | 25mm x 20mm |
| 54 | 32mm x 25mm |
| 55 | Supplying and fixing in position Indian water closet of size 580 X 440 mm, white glazed earthenware of approved quality with 'P' trapor 'S' trap confirming to IS :2556- Part XII with sand cushion and forming flooring alround the closet using 40 mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly)100 mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes / PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slabandmaking good the disturbedportion tooriginal conditionwithout leakage etc., complete complying with standard specification sand as directed by the departmental officers. CCMC SOR-25-26 Pg.no-15 |
| 56 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthenware wash hand basin of size 550 x 400mm (with pedestal) with a pair of cast iron brackets, including cost 1smm dia brass CP pillartap. 32mm dia \\"8\\" class Gl waste pipe with rubber plug and chain.15mm dia GM wheel valve. 1smm brass nipple, 'smm dia nylon connection, 32mm dia CP brasswastecoupling including fixing of wash basin using Cl brackets on to the wall in position with TW plugs and screws, rubber washers, white supply connection and painting lead and giving necessary water thebrackets with two coat of painting over a priming coatl of anti-corrosive paint including testing for teakages etc., complete complying specification and as directed by the departmental officers. (Thel wash hand basin and specials should be got approvedl by the Executive Engineer before use on with standard works). CCMC SOR-25-26 Pg.no-15 |
| 57 | Wiringwith2x1.5 sq.mm. PVC insulated single coreunsheathedFRLScopper conductor cableof 1100Vgrade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5 A FT switch with painting of suitable colour continuous earth wire connection of 1.5 sq.mm copper wire for lightpoint / fanpoint (for electronic regulator) Electrical SOR-25-26 Pg. no-02 |
| 58 | Supply and fixing of 1200 mm (48\\")sweep AC ceiling fan complete with stepped electronic 300 W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\") Electrical SOR-25-26 Pg.no-47 |
| 59 | Supply and fixing of 4 Feet LED18W Fitting with LED18W tube (Lower End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting. Electrical SOR-25-26 Pg.no-191 |
| 60 | Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb as directed by the departmental officers. Electrical SOR-25-26 Pg.no-40 |
| 61 | Wiring with 2 x1.5 sq.mm. PVC insulated single coreunsheathed FRLS copper conductor cableof 1100Vgrade in suitable heavy gauge MS conduit pipe onwall and ceiling with MS accessories in flush with wall with 150 mm x 100 mm x 75mm MS switch box with 3mm thick hylum sheet cover for 5A 3 pin non interlocking CS plug with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed plug point Electrical SOR-25-26 Pg. no-015 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender