Tender For Sprinkler Irrigation System And Lawnmower For Sports Stadium At Anantnag.Advertised Cost=₹ 29.51 Lacs (Amount Without Gst=₹ 25.01 Lacs, Gst Amount=₹ 04.50 Lacs)
Tender Value
29.51 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
19 days left
EMD
59020
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Sprinkler Irrigation System And Lawnmower For Sports Stadium At Anantnag.Advertised Cost=₹ 29.51 Lacs (Amount Without Gst=₹ 25.01 Lacs, Gst Amount=₹ 04.50 Lacs)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Sep-2026 | Corrigendum | Other | 12-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, installing, testing and commissioning of 10 HP surface-mounted monobloc pump set, suitable for operation on 415 V, 3-phase, 50 Hz AC supply, 2900 RPM, single-stage construction, having 65 mm suction and 65 mm delivery connections, capable of delivering discharge from 6 to 11.5 litres/sec against a head ranging from 32 m to 49 m, complete with cast iron/NORYL impeller, cast iron delivery casing and motor body, carbon steel pump shaft,bellows, gland-packed sealing arrangement and all necessary accessories, conforming to applicable IS/ISI requirements, complete in all respects. |
| 2 | Providing, supplying and fixing of adjustable pop-up impact type sprinkler suitable for landscaping and irrigation purposes, having ½ inch and ¾ inch female threaded bottom inlet connection, discharge capacity ranging from 456 to 1192 litres/hour and maximum throw radius of 12-15 metre at an operating pressure of 2.0 to 4.0 kg/cm², with 25° trajectory angle, capable of 360° full-circle operation and adjustable part-circle operation from 15° to 345°, complete with all necessary fittings, connections and accessories, as required, complete in all respects.MOC: SS/Bronze/or as per OEM |
| 3 | Providing, laying, testing & commissioning of 'B'class medium duty G.I. pipe conforming to IS:1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100mm |
| 4 | Supplying, Installation, Testing and Commissioning of fixing of following dia. Cast Iron gate valve (Screwed type) on the existing pipeline, including testing & Commissioning etc. complete as required. 80mm |
| 5 | Supply, Installation,Testing and Commissioning of 100 mm long male threaded Nipple in GI B Class complete as per the direction & entire satisfaction of Engineer in charge. 15 / 20 mm dia. or as per site requirement. |
| 6 | Double Flange Sluice Valve PN 1.6 Bronze/Gun Metal 100mm |
| 7 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 100mm |
| 8 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : 80mm |
| 9 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :80mm |
| 10 | Supply, installation, testing & commissioning of SS ball valve 25mm dia for flushing connection. |
| 11 | Pipe Earth Work: Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: lead upto 25 mtr, beyond 1mtr from cutting edge.All kinds of soil : |
| 12 | Providing and fixing liquid level controller for fire pump to cut off in case low level of water in tank including cables, pannel etc. and making necessary connection to panel and commissioning. |
| 13 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(welded) |
| 14 | S/L , testing and commissioning of PVC aluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments of reputed standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. 4 Core x 35 Sq mm |
| 15 | S/L , testing and commissioning Cu armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments of reputed standard make as directed by engineer incharge and making end termination with brass compression gland and cu lugs of required size. 4Core x 6 Sq mm Cu |
| 16 | Fabrication, supplying, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2 mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection withsuitable size copper conductor cable/solid copperstrip, having switchgears and accessories, mountings and internal wiring, earth terminals,numbering etc. complete in all respect, suitable for main Monoblock pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 54 as required : INCOMING:100A, 36kA 4 Pole MCCBIcs=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc.LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps. Set of Aluminium Bus Bar 200A.Change over switch of rating 100 A.OUTGOING:1. Main Pump2 No. 63A, 36kA TPN MCCB Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.1 No. 32A Feeder for Borewell water pump.( Note : All outgoing feeders for pumps should havedigital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)The panel shall automatic duty/standby logic Controller for operation of Main Mono-block pumps. |
| 17 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting the concrete path wherever required,jointing etc.direct in ground including excavation and refilling the trench ( with cement concrete to be paid seperately), making the surface level but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal |
| 18 | Supplying and fixing of maintenance-free chemical earthing system with GI electrode of size 3.0 m long, 50 mm diameter, hot dip galvanized to 80 microns, with terminal arrangement on top including copper strip/lug for termination. The electrode shall be surrounded with backfill compound (BFC) like bentonite/graphite compound in a bore hole of 100 mm to 150 mm diameter. The complete system shall have a resistance of less than 1 ohm when tested. It shall be installed complete with watering arrangement, PVC cap, funnel, and masonry chamber with CI cover of appropriate size.Earth resistance to be maintained below 1 Ω and tested using clamp-type earth tester after installation. |
| 19 | GI Strip of following sizes 25 x 6 mm G |
| 20 | Boring/Drilling of 125 mm dia Bore well of required dia for casing/strainer pipe by suitable method prescribed in IS:2800(part-1), including collecting samples from different strata, repairing and submitting strata chart/Bore log including hire and running charges of all equipment tools, plants and machineries required for the job, all complete job, all complete upto desired depth (all types of soil). The job includes:- Supplying, assembling, lowering and fixing in vertical position in Bore well, ERW (electric resistance welded) FE410 mild steel plain ended casing pipes of 125 mm dia, confirming to IS:- 4270 of repeated and approved make including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture including required hire and labour charges including and accessories, all complete for all depths, as per directions of engineer in-charge, development of tube well with backwash method with air compressor of minimum capacity 1000CFM(300-PSI air delivery system)with suitable arrangements till well is thoroughly developed in all respects. |
| 21 | Providing and laying of cement block of 1.5 m dia and 0.3 m (1ft) deep in a mix of 1:2:4 to adequate the strength to act as sanitary block for the well. The Block comprimises of mud mat of 4 inch height and then layinfg of 8 inch cement concrete with suitable drainage |
| 22 | Providing, supplying, installing, testing and commissioning of 3 HP capacity borewell submersible pump set, suitable for operation on 220 V, single phase, 50 Hz AC supply, complete with 9-stage pump, 50 mm delivery outlet, capable of delivering water against a head range of approximately 14 to 50 metres and maximum discharge up to 350 LPM, with Noryl impellers, stainless steel pump shaft and stainless steel motor body, mechanical seal arrangement, complete with submersible motor, suitable cable connection, necessary accessories, supports, lifting arrangement and all other required fittings/accessories for proper installation and satisfactory operation, complete in all respects as required at site. |
| 23 | Providing and fitting of 40 mm dia. HDPE pipe (PE80 ) Class B, the pipe is properly threaded at both ends and the length of each pipe should not exceed 3M. the pipe is provided and fitted with sockets for jointing purpose. |
| 24 | Supplying & fixing PVC insulated PVC sheathed copper conductor submersible flat cable ISI Marked in existing metal/ HDPE / PVC/ pipe/ in bore well/ in sump including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. complete as required.2 Core 2.5 Sq mm Flat Cable. |
| 25 | Providing and fitting of 05 mm steel wire rope for holding pumping unit. |
| 26 | Providing and fitting of 40 mm dia. MS holding clamps fabricated out of 10 mm thick MS plates along with nuts and bolts. |
| 27 | Providing and fitting of MS holding clamp fabricated out of 10mm thick MS Plate with nuts and bolt for borewell, size not less than 125mm dia. |
| 28 | RESERVIOR TANKEarth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil: |
| 29 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages & Head Loads loading un-loading and stacking etc complete job. |
| 30 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: Including all carriages 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). |
| 31 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 32 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Including all carriages 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 33 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermomechanically treated bars of grade Fe-500 or more. |
| 34 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand). |
| 35 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc completeOn concrete work |
| 36 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality.Rectangular shape 600x450 internal dimensions. |
| 37 | Providing, supplying and fixing 100 mm dia G.I puddle flange, suitable for installation in 450 mm (1.5 ft) thick RCC wall, fabricated from approved grade alloy steel, comprising pipe sleeve of required length, flange plate, stiffeners/anchor arrangements, welding and necessary accessories, including cutting, fabrication, alignment, positioning and fixing in the RCC wall before concreting, complete to ensure watertightness at the pipe penetration and as directed by the Engineer-in-Charge. |
| 38 | Providing and fixing 25 mm (1\\") bronze spring-loaded safety relief valve, open discharge type, screwed ends, suitable for working pressure up to 10 kg/cm², complete with all accessories, testing and commissioning |
| 39 | LAWN MOWERProviding, supplying, testing and commissioning of self-propelled with driver seat, ride-on mower petrol engine operated lawn mower, suitable for cutting and maintenance of Playgrounds, lawns, parks, gardens and landscaped areas, complete with the following minimum technical specifications:The machine shall be equipped with a 4-stroke twin-cylinder petrol engine that shall produce 20 HP with a displacement of 725 cc, operating at 3400 ± 75 RPM. The mower shall features a self-starter/key start system and must have a minimum of 11-litre fuel tank.The Lawn mover shall be designed with a rear-wheel transmission drive and variable speed control, shall have a minimum of 1066 mm (42 inches) cutting width using a 2-bar blade system with electric PTO blade engagement. Its cutting height can be set across 12 positions ranging from a minimum height of 25 mm to a maximum height of 101 mm.The machine shall be suitable for mowing areas between 1 to 1.5 acres and equipped with a minimum of 230-litre grass catcher/collector.The item shall include complete engine assembly, mower deck, cutting blade, wheels, transmission, grass collection bag, safety controls, handles, controls, fuel and oil systems and all other standard accessories required for satisfactory operation, including initial filling of lubricants and testing, complete in all respect. The Job also includes 2 year DLP / warranty period from the date of Handover. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
Today
Oct 12, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 19 daysOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender