Tender For Providing Of Urinal Point And Addn/ Altn Of Bldg No P-340 At Sunjuwan Under Ge Jammu.
Tender Value
44.23 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
0 days left
EMD
88460
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Urinal Point And Addn/ Altn Of Bldg No P-340 At Sunjuwan Under Ge Jammu.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-Oct-2026 |
| 2 | 26-Sep-2026 | Corrigendum | BOQ | 09-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | B/R Portion: -Earth work in excavation by mechanical means (Hydraulic excavator) in any type of soil in foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil, within a lead of 50 m complete all as specified and as directed. |
| 2 | Cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete complete all as specified and as directed. |
| 3 | Brickwork with sub class 'B' bricks (old size), straight or curved on plan exceeding 6m in mean radius, built in cement mortar (1:6) complete all as specified and as directed. |
| 4 | Providing Brick work with old size bricks having crushing strength not less than 75 Kg/ Sqcm straight or curved on plan exceeding 6m mean radius in half brick thick wall built in cement mortar (1:4) complete all as specified and as directed. |
| 5 | Returning, filling in soil including spreading levelling watering and well ramming in layers not exceeding 20 cum complete all as specified and as directed. |
| 6 | Reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc; basement slabs; under-reamed piles and mass concrete complete all as specified and as directed. |
| 7 | Reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in beams, lintels over 1.5 metre span complete all as specified and as directed. |
| 8 | Reinforced cement concrete M-25 (1 : 1.5 : 3) (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 9 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter complete all as specified and as directed. |
| 10 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works not exceeding 20cm wide and sides of PCC/ RCC bands exceeding 10cm but not exceeding 20cm wide with rough finished complete all as specified and as directed. |
| 11 | TMT bars (Fe 500), 10mm dia and over in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 12 | Description all as per Ser item No 11.00 here-in-before but 8mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and as directed. |
| 13 | Hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface complete all as specified and as directed. |
| 14 | Taking down old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and as directed. |
| 15 | Rendering in two layers (10 + 5) mm thick with water proofing compound on fair faces of brick work or concrete surface in cement mortar (1:4), finished even and smooth without using extra cement including necessary scaffolding for suitable height complete all as specified and as directed. |
| 16 | Rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed. |
| 17 | Rendering 5mm thick on concrete surface as in ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and as directed. |
| 18 | Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work not exceeding 15 cm in width or girth; including cutting to edges, all mitred and stopped ends complete all as specified and as directed. |
| 19 | Supply only integral water proofing compound complete all as specified and as directed. |
| 20 | Preparation of newly plastered surface of wall and applying two or more coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/ litre, of approved manufacturer, of required shade and colour over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/ litre complete all as specified and as directed. |
| 21 | Preparing of New plastered surface of wall, chajja, roof projection and roof fascia surface and applying two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489 : 2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.67 litres/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over 1mm thick exterior wall care putty complete all as specified and as directed.Notes: - (a) The work pertaining to Periodical services and water proofing shall be executed from authorized applicator through manufacturer of which the material i.e. paint, distemper, cement base paint, putty etc is proposed to be used by the Contractor and approved by GE.(b) The Contractor shall upload along with the documents under Cover - I, 'Memorandum of Understanding' (MOU) with only one manufacturer mentioned in the Contract, failing which the bid shall be liable to be rejected. |
| 22 | Preparing newly plastered surfaces and applying three coats of white wash as in ceiling etc complete all as specified and as directed. |
| 23 | Dismantling floors, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 24 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead complete all as specified and as per directions of Engineer-in-Charge. |
| 25 | 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base to floor finishes complete all as specified and as directed. |
| 26 | Providing non skid ceramic jointless coloured tiles, 7 to 8mm thick (Square/ Rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar (1:6) complete all as specified and as directed. |
| 27 | Glazed ceramic coloured of size not less than 300 x 450mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS-15622 of approved make, in all colour and shade approved by GE in skirting, risers of steps and dados over 12mm thick cement mortar (1:3), jointing with grey cement slurry @ 3.3 Kg per Sqm including pointing the joints with white cement mixed with pigment of matching shade complete all as specified and as directed. |
| 28 | Providing and laying vitrified tiles in floor of size 600 x 600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS-15622 of approved brand and manufacturer, in approved colour and shade, laid on 10mm thick cement mortar (1:4), jointing with grey cement slurry @ 3.3 Kg per Sqm including grouting the joint with cement and matching pigments etc. The tile must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with notch trowel, plier, wedge, clip or required thickness, levelling system and rubber mallets or palcing the tiles gently and easily complete all as specified and as directed. |
| 29 | Providing and laying vitrified tiles in floor of size 600 x 600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS-15622 of approved brand and manufacturer, in approved colour and shade, in skirting, riser, of steps, over 12mm thick cement plaster (1:3), jointing with grey cement slurry @ 3.3 Kg per Sqm including grouting the joints with cement and matching with pigments etc. The tile must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with notch trowel, plier, wedge, clip or required thickness, levelling system and rubber mallets or placing the tiles gently and easily complete all as specified and as directed. |
| 30 | Machine cut Kota stone slab flooring 20-25 mm thick in single length upto 2.0 metre (Equal length for tread length) as in treads laid over cement screed base 10mm thick in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and mirror polishing complete all as specified and as directed. |
| 31 | Machine cut Kota stone slab flooring 20-25 mm thick as in flooring laid over cement screed base 10mm thick in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and mirror polishing complete all as specified and as directed. |
| 32 | Machine cut Kota stone slab flooring 20-25 mm thick in single length upto 2.0 metre as in riser of steps, skirting, dado and pillar laid over 10mm thick backing coat in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and polishing complete all as specified and as directed. |
| 33 | Granite 14 to 18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 34 | Rounding to edges of stone slabs Grabite, Kota etc one edge, such as in steps, cooking platforms and other similar situations complete all as specified and as directed. |
| 35 | 20mm outer dia CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminshing pieces, caps and plugs, unions etc) complete all as specified and as directed. |
| 36 | 25mm outer dia CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminshing pieces, caps and plugs, unions etc) complete all as specified and as directed. |
| 37 | Galvanised tubes, medium grade, 25mm bore, ISI marked with all fittings such as bends, tees, elbows, unions, short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge. |
| 38 | CPVC brass elbow 20mm outer dia complete all as specified and as directed. |
| 39 | Vitreous China wash hand basin of size 550 x 400mm (Flat Back or Angle Back type) including 32mm bore PTMT waste coupling, waste pipe and PVC connection pipe of 15mm x 450mm long, a pair of Angle iron brackets duly painted/ erecting stand including cutting and pinning in ends, making good disturbed surfaces in cement mortar (1:3) complete all as specified and as directed. |
| 40 | 18mm to 20mm granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, urinal partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed or bedding layer of mortar 20mm thick in cement mortar (1:6) and taking down old complete all as specified and as directed. |
| 41 | Providing and fixing water closet squatting pan (Indian type W.C. pan) white Vitreous china Orissa pattern W.C pan of size 580 x 440mm with integral type foot rests with 100mm sand cast iron 'P' or 'S' trap, 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and as directed. |
| 42 | Vitreous china pedestal type water closet white, with 'P' or 'S' trap including 10 litre capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float valve and handle, polyethylene of low level or high density or PVC 32mm dia flush pipe, plastic water closet seat back, closed pattern with flat bottom and self closing cover and mild steel chromium plated hinging device complete all as specified and as directed. |
| 43 | Vitreous china urinals, bowl type (back or corner wall type) of size 465 x 355 x 265mm white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including 32mm dia brass chromium plated waste coupling with long screwed shank and fly nut, waste pipe, flanged end bedded in red lead and other end fixed, 15 dia and 450mm long PVC connection pipe with PTMT nuts and PTMT urinal spreader any colour for fixing with 15mm dia pipe complete all as specified and as directed. |
| 44 | Providing 15mm bore Bib taps fancy type chromium plated cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 45 | Providing 15mm bore pillar taps fancy type chromium plated cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts screwed for iron pipe complete all as specified and as directed. |
| 46 | Providing 15mm bore Stop valves/ angular cock fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 47 | Supply and fixing for providing Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position fixed in repairs complete all as specified and as directed. |
| 48 | Providing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 49 | Rotational moulded polyethylene water storage tanks three layers of 1000 litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I including 25mm thick ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm - 210 gms) complete all as specified and as directed. |
| 50 | Providing 20mm dia gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 51 | Providing 25mm dia gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 52 | Providing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 53 | Providing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 54 | Providing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 55 | Providing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 56 | PVC (SWR) bends 110mm radius complete all as specified and as directed. |
| 57 | PVC (SWR) bends 75mm radius complete all as specified and as directed. |
| 58 | 110mm PVC (SWR) junction single (T) equal/ Unequal complete all as specified and as directed. |
| 59 | PVC (SWR) vent cowl of radius of 110mm dia complete all as specified and as directed. |
| 60 | Mild steel framed works such as grills, framed guard bars, etc and similar work as in cooler stands, chajja stand etc conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed. |
| 61 | 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor/ plinth protection laid in suitable panels finished even and fair all as specified. 6mm joints should be filled with bitumen mastic fillings comprising of one part of heated bitumen 85/25 or 80/100 gde and three parts of sand (all by weight) complete all as specified and as directed. |
| 62 | Providing 450mm x 600mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 63 | Shower rose swivel type brass chromium plated 125mm size including fixing to steel pipe or unions complete all as specified and as directed. |
| 64 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows and other frames/ chowkhat of size 45 x 70mm (+ 5mm) comprising of virgin PVC polymer of 'K' value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimu frame density of 750 Kg/ cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class 'A' category with property of being termite/ borer proof, water/ moisture proof and fire retardantand fixed in position with mild steel hold fast/ lugs/ stainless steel dash fasteners of required dia and length complete all as specified and as per directions of Engineer-in-Charge. |
| 65 | Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of 'K' value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/ cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/Sqmm modulus of elasticity 850 N/ Sqmm and resistance to spread of flame of Class 'A' category with property of being termite/ borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixed with stainless steel butt hinges of required size with necessary full body threaded star headed countersunks, screw sand as per specification and drawing complete all as specified and as directed. |
| 66 | 100mm size stainless steel hinges medium weight cold rolled complete all as specified and as directed. |
| 67 | Extruded Aluminium alloy handles fabricated type anodised 150mm long complete all as specified and as directed. |
| 68 | 200mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed. |
| 69 | 300mm long dia aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed. |
| 70 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows and ventilatores including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings all as specified and as per directions of Engineer-in-Charge. |
| 71 | 5.0mm thick figured glass, pin headed type ordinary quality complete with aluminium beads in any size complete all as specified and as directed. |
| 72 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 W (Gde E-165) complete all as specified and as directed. |
| 73 | Mild steel work in tubular trusses or rectangular hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1239 (Part I - 1990) complete all as specified and as directed. |
| 74 | Compound girders and stanchions, lattice girders, aerial masts, Posts for sheds and the like including caps, bases, splices etc built up from two or more beam or channel sections or angles with plates, incluidng all lattices complete all as specified and as directed. |
| 75 | Rolled mild steel plates (plain or chequered), square cut or notched (ordinary or counter sunk) forming holes etc of Gde Fe-410-S complete all as specified and as directed. |
| 76 | Preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 77 | Pre-painted galvalume aluminium zinc coating GI based corrugated/ trapozodal steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 78 | Pre-painted galvalume aliminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 79 | Complete removal of existing treatment including fascias, cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and repair of internal wall/ ceiling to be done with repair mortar to get even surface including preparation of old surface of wall/ ceiling by filling cracks and make good smoothen surface by sand paper and applying two coats of premium acrylic smooth interior emulsion of approved colour with silicon additives and Colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre, one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10 Sqmtrs and 1mm thick exterior grade wall care putty as per manufacturer's instructions and allow 6-8 hrs to dry the surface in subsequent coats of paint and including necessary scaffolding at any height complete all as specified and as directed.Note: - (a) The work water proofing shall be executed from authorized applicator through manufacturer of which the material i.e. paint, distemper, premium emulsion, cement base paint, putty etc is proposed to be used by the Contractor and approved by GE. |
| 80 | Complete removal of existing treatment including fascias, cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint and loose plaster to be completely removed by Skilled labour and repair of wall/ ceiling/ chajjas/ cornices to be done with repair mortar to get even surface including preparation of old surface of wall/ ceiling/ chajjas/ cornices by filling cracks and make good smoothen surface by sand paper and applying two or more coats of 100% premium acrylic smooth exterior emulsion paint hving VOC less than 50 gm/litre and UV resistance as per IS-15489-2004, alkali and fungal resistance, dirt resistance exterior paint of required shade with silicon additives and Color stay Technology over one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10 Sqmtrs and 1mm thick exterior grade wall care putty as per manufacturer's instructions and allow 6-8 hrs to dry the surface in subsequent coats of paint and including necessary scaffolding at any height complete all as specified and as directed.Notes: - (a) The work pertaining to periodical services and water proofing shall be exceuted from authorized applicator through manufacturer of which the material i.e paint, distemper, premium emulsion, cement base paint, putty etc is proposed to be used by the Contractor and approved by GE.(b) The Contractor shall upload along with the Documents under Cover-1, \\"Memorandum of Understanding\\" (MOU) with only one manufacturer mentioned in the Contract, failing which the bid shall be liable to be rejected. |
| 81 | Home Shield PU Roofkoat (or equivalent) is a one component liquid, solvent free, cold applied, water proofing membrane that is highly elastic and UV resistant with 10 years warranty. ASTM D 6083-97a Water proofing and heat reflecting system having following key performance properties: -(i) UV resistant, prevent yellowing and weathering.(ii) Highly elastic upto 350% and crack bridging.(iii) Excellent adhesion on porous and non porous substrates.(iv) Tensile strength >10 N/ Sqmm with Geo Textile fleece.(v) Solar Reflective Index (SRI) more than 109-111 ASTM E 1980-11. System: - First coat : Providing and applying primer over the prepared surface with HS PU roof koat primer (or equivalent), Coverage : 0.2 Kg/ Sqm (with 50% diluton of water), Reinforcement : Geotextile 40 gsm, Second coat : Home shield roof koat (or equivalent), Consumption : 0.5 Kg/ Sqm, Third coat : HS PU roofkoat (or equivalent), Consumption : 0.8 Kg/Sqm. System buildup - 1.5 Kg/Sqm with geotextile of 40 gsm complete all as specified and as directed. |
| 82 | E/M Portion: -Taking down old unserviceable copper/ aluminium point wiring concealed/ batten (light, fan, socket, power, AC Point) complete including fittings such as switches, sockets, ceiling roses, bell push, lamp holder, pendants, regulators, sockets, call bell, any type of switch board etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and as directed. |
| 83 | Taking down carefully unserviceable MCB/ TPN distribution boards of any type/ size with MCBs/ TPNs and disconnected and making good disturbed surfaces complete all as specified and as directed. |
| 84 | Material and labour in replacement Sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cables of 4 Sqmm 2 single core for phase and neutral and one run of 4.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through concealed rigid PVC concealed conduit fixed in wall complete all as specified and as directed.Notes: - (a) Two runs of cable for phase/ neutral and one run of cable for earth will be measured and paid as one unit length.(b) Wiring shall be done in proper colour coding.(c) Rates are inclusive of cutting/ chasis and making good to disturbed surfaces with suitable PCC works. |
| 85 | Point wiring for one light/ fan point controlled by one 5 Amp modular switch with 1.5 Sqmm two single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into concealed PVC rigid/ steel conduit including supply and fixing of new modular steel terminal boxes of required size along with modular white cover plate with frame of suitable size for mounting switches, sockets, fan regulators etc complete all as specified and as directed.Notes: - (a) Wiring shall be done by using proper colour coding including making the disturbed surface good.(b) Earth wire shall be of green colour.(c) On RCC roof/ ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.(d) The rates are inclusive of cutting/ chasis with suitable PCC works and making good to disturbed surfaces. |
| 86 | Description all as per Ser item No 85.00 here-in-before but 5 Amp socket outlet on same board ISI marked complete all as specified and as directed. |
| 87 | Description all as per Ser item No 85.00 here-in-before but for one 5 pin 5 Amp socket outlet on independent board with cables 1.5 Sqmm size complete all as specified and as directed. |
| 88 | Description all as per Ser item No 85.00 here-in-before but for multi 5 pin 15 Amp switch socket outlet with 2.5 Sqmm copper conductor multistranded cable, PVC insulated (unsheathed) FRLS drawn into concealed PVC rigid/ steel conduit including continuous earth wire of size 2.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) cable complete all as specified and as directed. |
| 89 | Modular socket 6A - 5 pin combined, 2 module, 240 Volts ISI marked complete all as specified and as directed. |
| 90 | Modular switch 1 way 6A, 1 module, 240 Volts ISI marked complete all as specified and as directed. |
| 91 | Ceiling rose, 3 Pin/ PVC/ Polycarbonate isolated body ISI marked complete all as specified and as directed. |
| 92 | Modular switch 1 way 16A, 1 module, 240 Volts ISI marked complete all as specified and as directed. |
| 93 | Modular socket 6A/ 16A - 6 pin combined 2 module, 240 Volts ISI marked complete all as specified and as directed. |
| 94 | Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 95 | Self ballast LED retrofit lamp with PVC body and PC Diffuser 9 Watt 230 Volt 6500 K complete all as specified and as directed. |
| 96 | LED light fitting mirror type with high output diffuser 2 feet, 10 watt, 220 V AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 97 | LED light fitting, 1 x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor > 0.90, 100 Lumen/ Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 98 | Distribution board (TP&N) 4 way double door IP-43 protected with copper busbars, neutral links, earthing bar complete all as specified and as directed. |
| 99 | 415V 10 KA 'B' curve MCB TPN 100 Amp capacity in each distribution board complete all as specified and as directed. |
| 100 | Distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 Volts double door complete all as specified and as directed by Engineer-in-Charge.Note: - Distribution board and MCB's should be of same make. |
| 101 | SPN 40 to 63 Amps rating 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed. |
| 102 | 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 6 to 32 Amp complete with connection, testing and commissioning complete all as specified and as directed. |
| 103 | Material and labour in replacement of Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtrs deep below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nuts, bolts, check nuts and washer of galvanised iron including PCC pit in PCC (1:2:4) type B-1 precast RCC cover slab using reinforcement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5m length for drawing earth lead wire protection, common salt, charcoal etc complete all as shown in electrical plate No 3 of SSR Part - I and testing on completion complete all as specified and as directed. |
| 104 | Supply and fixing in replacement LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection complete all as specified and as directed. |
| 105 | Modular fan step regulator, 100 W - 2 module 240 Volts ISI marked complete all as specified and as directed. |
| 106 | Supply and fixing in replacement Ceiling fans, BLDC motor tech complete with blades, down rods, hanging hooks and accessories, 230 V, 1200mm sweep, suitable for working on fan regulator, min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete with fixing arrangement complete all as specified and as directed. |
| 107 | Supply and fixing in replacement of exhaust fan, PVC body made out of Sturdy Engineering plastic body, AC single phase 230V, 300mm sweep with louvers, shutter with blades, including making hole of suitable shape and size for 300mm sweep exhaust fan including brick work, plastering and making good to disturbed surfaces complete all as specified and as directed.Note: - Contractor will deposit old unserviceable exhaust fan in MES yard for further course of action. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 16, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Today
Oct 09, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender