Tender For Addition/Alteration To Logistic Blgd And Diso Bldg At Iam Under Ge (Af) Marathahalli Bangalore
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
5 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Logistic Blgd And Diso Bldg At Iam Under Ge (Af) Marathahalli Bangalore
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above GL) all as specified and directed. |
| 2 | M&L 75 mm thick PCC (1:4:8) type-D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed |
| 3 | M & L for 25mm thick cement concrete type B-1, 1:2:4 (20 mm grade aggregate) as in levelling course in flooring finished even and fair under floor finishes. |
| 4 | M & L 5 mm thick Rubber sheet with fabric backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive , size and colour as approved by Engineer - in - Charge, complete all as specified and directed. |
| 5 | M & L for Double Charged Vitrified Ceramic Colour tiles 9 to 10 mm thick (Square / Rectangular) polished , area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including cement screed or bedding layer of cement mortar 15mm thick in 1:4 complete all as specified and as directed . Make : Somany, Johnson, AGL, Kajaria |
| 6 | Ditto as item above but as in skirting over cement mortar backing plaster in CM1:3 10 mm thick including dismantling of wall tiling of any thickness ncluding cement mortar bedding ( but not backing) removing tiles and rubbish off the premises.complete all as specified and directed. Make : Somany, Johnson, AGL, Kajaria |
| 7 | M & L for non skid joint free coloured ceramic tiles 7 to 8 mm thick of size 300mmX300mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of cement mortar 15 mm thick in 1:4 complete all as specified and as directe. Make : Somany, Johnson, AGL, Kajaria |
| 8 | M & L for glazed ceramic coloured tiles with border tile pattern in vertical surfaces 350 x 250 x 7 mm / 450 x350 x7 mm / 300 x 450 x 7 mm thick , set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and above 10 mm thick cement plaster in 1:3 as backing coat including dismantling of wall tiling of any thickness ncluding cement mortar bedding ( but not backing) removing tiles and rubbish off the premises complete all as specified and as directed. Make : Somany, Johnson, AGL, Kajaria |
| 9 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons incl granite slab in kitchen platform Laid, bedded and pointed in any mortar etc all as specified and as directed. |
| 10 | M & L Granite (of any type) tiles 20 mm thick machine cut, (table rubbed and polished ) in steps , jombs, pillers, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting of grooveson treads minimum three line in horizontal direction , complete all as specified and directed. |
| 11 | M & L for 20 mm thick Granite (of any type) tiles machine cut,bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 20 mm thick screed bed in CM 1:4 including grinding and polishing complete all as specified and directed. |
| 12 | M & L for 20 mm thick Granite (of any type) tiles machine cut,in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing fixing with 10 mm thick backing coat on brick work or concrete surface in CM 1:3 cement mortor complete all as specified and directed. |
| 13 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 14 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed . |
| 15 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) not exceeding 1.5 Sqm each complete all as specified and directed . |
| 16 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per directed and specified. |
| 17 | S & F 5.50 mm sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 sq m Each pane all as specified and as directed |
| 18 | S & F 12 mm thick veneered particle board interior grade , solid core, general purpose type, with face veneers of type BB fixed with screws to aluminium frame work etc, with decorative face veneers both faces complete all as specified and directed. |
| 19 | S & F Powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 20 | S & F Powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified |
| 21 | S & F Powder coated Anodised aluminium window and ventilator shutters, fixed type three track windows two glass and one wire mesh shutter without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified Note : Glass pane and SS wire mesh shall be measured and paid separately in supply only item. |
| 22 | S & F Brass 4 lever Mortice lock, vertical type, size 100 mm complete all as specified and directed. |
| 23 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around theopening, all complete as per requirement and direction of Engineer-in- charge. |
| 24 | S & F of 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 complete all as specified and directed. |
| 25 | Supply and fixing 200 mm long aluminium, anodized barrel tower bolts of extruded section all as specified |
| 26 | Supply and fixing 150 mm long extruded alluminium alloy handle, cast type, anodized all as specified |
| 27 | S & F 25 mm dia aluminium anodised powder coated type tubular curtains rod including fixing brackets, stops, rollers etc complete all as specified and directed. |
| 28 | S & F Floor door of stopper aluminium alloy body and tongue, 150 mm overall length, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed |
| 29 | S & F sinks with draining board made of stainless steel 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe , overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete all as specified and as directed. Make : Parryware, Nirali, Kajaria sanitary ware, |
| 30 | S & F PVC waste pipe, 32 mm dia, 750mm long, suitable for sink all as specified and as directed. |
| 31 | Supply and fixing Waste coupling for sink stainless steel fixing to sink complete all as specified and directed. |
| 32 | S & F Bib taps, long body fancy type chromium plated with crutch or butterfly handle, screwed down, complete all as specified and directed. |
| 33 | S & F PVC connections 600 mm long between ends with 2 Nos. brass nuts and washers, 15mm size, fixed in repairs, all as specified and as directed. |
| 34 | S & F in repairs 20mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed. |
| 35 | S&F in repairs 32mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed. |
| 36 | S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted 500litre capacity and fixed in position all as specified in SSR Part complete all as specified and directed. Make : Sintex Polycon, Rotex |
| 37 | S & F Ball valves high 25mm bore pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) |
| 38 | S & F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilings complete all as specified and directed. |
| 39 | S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilings complete all as specified and directed. |
| 40 | S & F PVC bends of 110 mm dia complete all as specified and directed. |
| 41 | S & F PVC bends of 75 mm dia complete all as specified and directed. |
| 42 | S & F PVC (SWR) floor trap, plain with grating including jointing with solvent cementbends of 75 mm dia complete all as specified and directed. |
| 43 | Taking down cement plaster on brick work or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 44 | M & L for two layer (15 mm thick ) Rendering of top layer 5 mm thick with WPC over a 10 mm thick base layer rendering in CM 1:4 on concrete masonary or surfaces other than fair face of brick work finished fair and even without using extra cement.Note WPC shall be measured and paid separetely in supply only item. |
| 45 | M & L for rendering 10 mm thick in cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed. |
| 46 | M&L for preperation of newly plastered surfaces of walls and applying two coats of oil bound distemper on wall surfaces over a coat of alkali resistant primer over 1.5 mm thick wall care putty complete all as specified and directed. |
| 47 | M & L for applying two or more coats of 100% premium acrylic emulsion paint ( 200 micron ) having VOC less thean 50 gm / litre and UV resistance as per IS- 15489-2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinned) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over newly plastered surfaces of wall surfaces complete all as specified and as directed. |
| 48 | M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper on wall surfaces over a coat of alkali resistant primer over 1.5 mm thick wall care putty complete all as specified and directed. |
| 49 | M&L for preperation of old decorated surfaces including brooming down or steel wire brushing, scraping down smokes soot, module, moss and effloroscent salts, oil and gresy spots and applying one coat of oil bound distemper on ceiling surfaces complete all as specified and directed. |
| 50 | M & L for complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint ( 200 micron )having VOC less thean 50 gm / litre and UV resistance as per IS- 15489-2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinned) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over wall surfaces over a coat of alkali resistant primer complete all as specified and as directed. |
| 51 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed |
| 52 | Removing material or debris retrives from above demolition or cleaning to a distance exceed 1.5 Km and not exceeding 5.0 Km and depositing where directed complete all as specified and directed |
| 53 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles in all as specified |
| 54 | Cutting openings, through brick walls/Stone wall for door, window and other openings or enlarging xisting openings. converting window into door openings, etc. or cutting out defective brick work/stone work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks/stone , hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed. |
| 55 | M & L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) in PCC 1:3:6 type C1 using 20mmgarded aggregate and setting in mortar 1:6 complete, in walls complete all as specified and directed. |
| 56 | M & L RCC Slabs type B1 (20 mm graded aggregate) supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like cooking platform etc complete all as specified and directed. |
| 57 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) ® fair finished surface complete all as specified and directed. |
| 58 | M&L for 75mm thick PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in plinth protection finishing surface even and fair all as specified and directed. |
| 59 | Supply only Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed |
| 60 | Supply only 4 mm sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq m Each pane all as specified and as directed |
| 61 | Dismantling boarding, any description, fixed in any position with nails |
| 62 | S & F 12 mm thick minaral fibreboard far false ceiling fixed with GI Powder coated snap grid 605 x 605 mm frame work as in false ceiling including hangers 4mm dia GI wire (upto 1200mm centre to centre upto length as required at site) and adjusting level fixed to roof wooden member by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners complete all as specified and directed . |
| 63 | Excavation in trenches not exc 1.50m wide and not exc 1.50m depth and getting out in Hard/Dense soil. |
| 64 | Material & labour for plain cement concrete 1:4:8, type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete. |
| 65 | Material & labour for Reinforced cement concrete Type B1 1:2:4 (20 mm graded aggregate) in foundation industrial grade , foundation beams, plinth beams bases for columns , basement slabs, under remed piles and mass concrete complete all as specified and directed . |
| 66 | Returning filling including spreading levelling watering and well ramming to excavated soil in layers not exc 25 cm thick complete all as specified. |
| 67 | Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified. |
| 68 | Material & labour for formwork to column with fair finished surfaces. |
| 69 | Material & labour for RCC Columns, Pillers, Piers, posts and struts type B1 1:2:4 (20 mm graded aggregate ) fair finished flat concrete surfaces comploete all as specified and directed. |
| 70 | Material & labour for formwork to side and soffits (if any) of beams, lintels etc. |
| 71 | Material & labour for RCC type B1 1:2:4 (20 mm graded aggregate ) in beams, cantilevers, bressumers, lintels over 1.50m span. |
| 72 | Material and labour for TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with MS wire (annealed) not less than 0.90mm dia confirming to Fe 500 D. |
| 73 | Material and labour for TMT bars 5mm dia and over upto and including 10mm dia confirming to Fe 500D as in stirrups, spacers and binders. |
| 74 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for |
| 75 | S & F Joist, channel, angle, Tubes or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) ®c complete using EWR or inducton butt welded tubes conforming to Fe410-W (Gde- E-250) quality A complete all as specified and directed. |
| 76 | M & L Rolled sections as in main and cross beams, hip and jack rafters; purlins, post where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete ll as specified and directed |
| 77 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 78 | S & F Framed work such as in sliding or side hung gate ( ornamental or plain) with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; gate , framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 79 | M & L for preparation of new steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer completed all as specified and directed. |
| 80 | M&L for Surface excavation in hard /Dense soil n. exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed |
| 81 | M&L for Hardcore of gauge n exc. 63 mm of broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 82 | S & F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment laid over 20 mm thick sand cushioning complete all as specified and directed. Note : sand cushoning shall be measured and paid separately. |
| 83 | Supply only sand filling under floors as in sand cushioning for paver blocks etc complete all as specified and directed. |
| 84 | Supply and install hi wall split units air conditioner indoor/outdoor of capacity 2.0 TR complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 complete all as specified and directed. (Make :- Blue Star/ Carrier/Voltas) |
| 85 | S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA |
| 86 | M & L for sub main wiring complete with two runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 1x6 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed. |
| 87 | S&F double pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20 Amps capacity complete all as specified and directed by Engr-in-charge |
| 88 | M&L for mild steel stand duly painted suitable for fixing 2/1.5 TR AC out door unit fixing in wall / floor, including making bore required size for copper pipe & copper cable with sweating pipe required size and length upto ground level complete all as spcecified and directed. |
| 89 | Supplying and Fixing Copper refrigerant pipe Copper tube 5/8 \\" x 1/4\\" dia and connecting along with insualtion sleeves incl leak testing complete all as specified and directed. |
| 90 | Supply and fixing copper power cable of insulated, PVC sheathed , multistranded copper cable of 2.5sqmm 3 core, ISI marked, 1100 volts grade between indoor and outdoor unit along with necessary accessories complete all as specified and directed. |
| 91 | Supplying and Fixing PVC flexible Conduit pipe 25mm dia medium grade including all accessories for drain out pipe all as directed. |
| 92 | Taking down carefully copper/aluminum sub main wiring of any size including casing and caping / conduit and making good the disturbed surface of walls as directed. |
| 93 | Taking down carefully copper/aluminium point wiring of any type of batten or conduit (Light, Fan, Socket or power) complete removing material from site and making good the disturbed surfaces of walls, roofs etc including two coats of white/colour washing/distempering etc to match the existing complete all as directed. |
| 94 | Taking down carefully DB box including mcb, mccb of any size and any type complete all as specified and directed. |
| 95 | Taking down ceiling fan/exhaust fan,sealing cable end,dismantling blades and removing fan and handing over to MES store complete all as specified and directed |
| 96 | M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the following:-(a) One light point /Fan point controlled by one switch. |
| 97 | (b) One 5 Amps socket point on independent board. |
| 98 | (c) All as per item No.96 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board . |
| 99 | (d)All as per item No.96 above but wiring complete with 4 Sqmm for AC point |
| 100 | Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed |
| 101 | S & F modular socket 06 Amps 2/3 pin, 2 module complete all as specified & directed. |
| 102 | Supply & fixing modular switch 16 Amps 1 module complete all as specified & directed |
| 103 | S & F modular socket 06/16 Amps 2/3 pin 2 module complete all as specified & directed. |
| 104 | Supply and fixing 35/36 W LED Fitting, 2 x 2 recess / Surface LED flat panel with high brightness LED for glare free (shadow less) homogenous illumination including LED driver complete all as specified.(Make : Havells / CG / Bajaj) |
| 105 | S&F in repair LED PC batten light fitting of 4 feet 20 watt, with energy efficient LED and integrated electronic driver of 20W fitting including connecting up with three core flexible copper conductor upto ceiling rose complete all as specified and directed. |
| 106 | S&F Lumiline LED tube with box type fitting , 2 feet, 10 watts alongwith tube complete all as specified and directed. Make : Bajaj /CG/Philips/Havells |
| 107 | S&F Celing Fan complete with blades ,elcetronic regulator and acessories , 230 volts, 1200 mm sweep , min air delevery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor complete all as specified and directed. |
| 108 | Supply and fix exhaust fan, sturdy engineering plastic AC single Phase. 230V of size 300mm sweep heavy duty with, blades, and frame and louvers complete all as specified and directed. |
| 109 | S&F in replacement single pole and neutrla enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed by Engr-in-charge. |
| 110 | Supply and fix ceiling rose suarface bakelite three terminals 65x50mm complete all as specified. |
| 111 | S & F MCB SPN 32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed. |
| 112 | S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed. |
| 113 | S & F MCB DB SPN 8 Way with 200 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed. |
| 114 | S & F MCCB DB Vertical TPN 4 way 'A' frame,including MCCB TPN 63 Amp breaking capacity 16 KA- 02 nos, double door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match complete all as specified and directed. Make- Havells or equivalent |
| 115 | All as Srl item No. 114 but two single core 2.5 Sqmm and 2.5 Sqmm for earth continuous earth wire.(Note :- 2 runs of 2.5 sqmm single cable and one run of 2.5 sqmm earth wire cable incl PVC conduit 20/25 mm dia shall be considered as one unit/1RM |
| 116 | All as Srl item No. 114 but two single core 1.5 Sqmm and 1.5 Sqmm for earth continuous earth wire.(Note :- 2 runs of 1.5 sqmm single cable and one run of 1.5 sqmm earth wire cable incl PVC conduit 20/25 mm dia shall be considered as one unit/1RM Please Enable Macros to View BoQ information |
| 117 | All as Srl item No. 114 but two single core 1.5 Sqmm and 1.5 Sqmm for earth continuous earth wire.(Note :- 2 runs of 1.5 sqmm single cable and one run of 1.5 sqmm earth wire cable incl PVC conduit 20/25 mm dia shall be considered as one unit/1RM Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender