Tender For Certain Repair To Or Living In Billets At Af Stn Amritsar
Tender Value
9.99 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
6 days left
EMD
19980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain Repair To Or Living In Billets At Af Stn Amritsar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Sep-2026 | CORRIGENDUM NO 1 | Other | 09-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor,hearth or wall tiling including cement mortar bedding (without backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge . |
| 2 | Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed by Engr-in-Charge . |
| 3 | M&L for ceramic glazed coloured tiles of size 350x250x7mm/ 450x350x7mm thick joint free on and incl 10mm thick screed bed in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces as cladding ,skirting and dado complete all as specified and directed by Engr-in-charge. |
| 4 | M&L for machine cut kota stone slb flooring 16-18 mm thick over 20 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including ,cutting and mirror polishing complete all as specified and directed by Engr-in-Charge . |
| 5 | Ditto all as per item No 4 above but as in dado, riser & skirting over & incl 10mm thick rendering in CM 1:3 all as specified and directed by Engr-in-Charge . |
| 6 | M&L for polishing of Old surfaces on marble/ kota stone where ever required, intial preparation includes grounding the surface evenly with machine fitted with fine grade blocks (No. 120) thereafter final grinding with machine fitted with the finest grade grit blocks (No. 320) carried out the day after the first grinding completed. After the final polish, oxalic acid shall be dusted over the surface at the rates of thirty three (33) gms. per square metre sprinkled with water and rubbed hard with pad of wooden rags. The following day the floor shall be wiped with a moist rag and dried with a soft cloth and finished clean complete all as specified. |
| 7 | M&L for non skid dark/ coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.09 sqm to 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:4 complete all as spc. |
| 8 | M & L for 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 9 | M&L for 15-16mm thick Granite (of any tpe) work (tablee rubbed and polished) full length in steps, jambs, pillars, window cills,cooking platforms incl making hole for gas pipe and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 10 | M & L for Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations etc completed all as specified. |
| 11 | Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc complete all as specified and directed . |
| 12 | M&L, Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 13 | M&L, Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and as directed. |
| 14 | M&L rendering 15 mm thick in CM 1:4 on fair faces of new brick work or concrete surfaces with water proofing compound , finished even and smooth without using extra cement all as specified and as directed by Engr-in-Charge . WPC shall be measured and paid seperately |
| 15 | Supply water proofing compound to mixed with cement mortar etc complete all as directed. |
| 16 | Taking down cement plaster on brick or concrete walls, ceiling etc, including racking out joints , hacking for key, scrubbing down with water etc complete all as specified & directed by EIC . |
| 17 | M&L for Rendering 12 mm thick in cement mortar 1:6 on brick or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 18 | M&L 5mm thick cement plastering on ceiling in CM 1:3 over fair faces of concrete surfaces and rendering is to be finished even and smooth without using extra cement complete all as specified and directed by engineer in charge . |
| 19 | M&L for preparation of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed. |
| 20 | Material and labour, preparing of newly plastered surfaces of wall and applying two coats of white wash complete all as specified and directed. |
| 21 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5sq.m each complete all as specified and directed. |
| 22 | M&L for Solid PVC Door Frames of size 50mm x 47mm made out of 5mm wood grain PVC sheet reinforced with M.S. Square tube , supplying & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 23 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets used instead of plain color and 5mm thick x 15mm wide PVC shhet eading used inside stiles and rails and decorative pvc beading of 10mm x 10mm used instead of exposed portion of PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed. |
| 24 | S&F 200 mm ISI marked in size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 25 | S&F 150 mm ISI marked in size aluminium alloy handles , anodised, fabricated type, anodised complete all as specified and as directed. |
| 26 | S&F mild steel medium wt. butt hinges of size 100mm complete all as specified and directed. |
| 27 | S&F incl taking up and down GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed |
| 28 | S&F in repair Concealed stop cock 15mm bore dia,cast copper alloy, chromium plated screwed down high pressure,with crutch or buterfly handle,screwed both ends for pipes or for unions incl repair to surface to match the existing surface complete all as specified and as directed. |
| 29 | S&F in repair Pillar taps, cast copper alloy but fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed. |
| 30 | S&F in repair 15mm bib cock,cast copper alloy chromium plated fancy type15mm bore with capstan handle,screwed down,screwed from iron pipe or for brass ferrule, complete all as specified and as directed. |
| 31 | S&F in repair 15 mm bore stop valves/ angle valves fancy type chromium plated screwed dwon high pressure with cruth or butterfly handle for 15 mm dia iron pipe fixed in repairs complete all as directed. |
| 32 | Dismantling of CI/PVC pipe of 75/100mm dia fixed with cement joint. |
| 33 | S & F 75 mm dia bore PVC (SWR) pipe (Type 'B') single socketed in trenches/floors in any length with rubber ring joints complete all as specified and directed. |
| 34 | M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches or in floor and in sewage soil waste or in rain water complete all as specified and directed |
| 35 | M&L for Cement concrete bed to drain pipe and packing under haunching against side of pipes after laying in PCC (1:3:6) type C-2 using 20mm graded stone aggregate for 75/110mm dia pipe complete all as secified and directed |
| 36 | Excavation in trenches not exc 1.5m wide and not exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed by .Engr in Charge |
| 37 | Returning,filling in trenches including spreading watering and well ramming in layers not exc 25cm thick in soft.loose soil complete all as specified and as directed . |
| 38 | Removing excavated materials to a distance not exc 50m and depositing where directed by EIC at a levlel not exc 1.5 m above the starting point complete all as specified and as directed. |
| 39 | S&F PVC (SWR)bends 110mm dia, in any radius, complete all as specified and directed. |
| 40 | S&F in 75 mm dia PVC (SWR ) floor trap/ nahani trap with grating, plain with grating including jointing with solvent cement complete all as specified and directed |
| 41 | S&F in repairs vitreous china wash down water closet white pedestal pan and trap, including connection to drain ( or out going pipe ) and to flushing pipe, antisyphonage pipe, with plastic water closet sheet cover white , closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed |
| 42 | S & F vitreous china squating pan ''Orissa pattern size 580 x 440mm white with integral foot rest (excluding, flushing cistern and flush pipe) squating pan including trap with connection and to flushing pipe,anti-syphonage pipe etc complete including making good to floor but including trap set including concrete complete all as specified and directed. |
| 43 | S&F in repair, 10 Litre capacity PVC valveless, syphonic action type,flushing cistern low level ,white, with inlet,ball valve, float ,flush pipe and handle including brackets, 32mm bore PVC flush pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed. |
| 44 | S&F Vitreous china wash basin white flat back 550 x 400 mm with pedestal , with fitting of PTMT waste coupling suitable size ,PVC waste pipe ,angle iron brackets with painting of brackets etc fixed in repairs complete all as specified and directed. |
| 45 | S&F in repairs Vitreous China urinals, 465x355x265 complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and Union for discharge pipe including waste pipe and urinal spreader complete all as specified.. |
| 46 | S&F in repair china urinal partition white of size 310*700 mm , 40 cm aove floor line all as specified and directed by Engr-in-Charge . |
| 47 | Supplied & fixing steel windows or ventilators, fixedtype, with glazing bars all as specified and directed by Engr-in-Charge |
| 48 | S&F in repair Sheet glass 3mm thick ordinary quality and glazing with oil putty in squares in n.exc 0.5 sqm in including taking down old broken glass completely each panes complete all as specified and directed by Engr-in-charge. |
| 49 | S & F in repair Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed by Engr-in-Charge . |
| 50 | S&F 500 Ltr capacity, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling old tank all as specified in SSR Part I complete all as specified and as directed. |
| 51 | S&F in repair 20 mm bore Ball brass valves , high pressure , with polythene float valve and flynut complete , screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 52 | M&L for Demolition of cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed. |
| 53 | M&L PCC 1:4:8 type D-2 using 40mm graded crushed stone aggr as in sub base/foundation all as specified and directed by engineer in charge. |
| 54 | M&L for dismantling boarding of any description fixed in any position with screws etc all as specified and directed by Engr-in-charge |
| 55 | M & L for 18/19 mm thick, Block boards, grade 1 quality, exterior grad commercial type, fixed with screws to frame-work as in cupboard,kitchen cabinet and partition , shelf, etc completed all as specified and directed by engineer in charge. |
| 56 | M & L for 6 mm thick, No of ply 7, plywood, grade BWP, type BB fixed with screws to timber frame work, etc completed all as specified. |
| 57 | M & L for 0.9 mm thick, Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, etc completed all as specified. |
| 58 | S&F of continuous piano hinges mild steel for 30mm flap , bright finish or elctrogalvanised fixed in repair all as specified and directed by Engr-in-charge . |
| 59 | S & F in repiar 300 mm long ISI marked mild steel ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed by engineer incharge |
| 60 | S & F Counter top Vitreous China Wash hand basin, white 550x400 mm including brackets(including 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe and 600mm long PVC connector 15mm) all as specified & directed by Engineer-in-charge. |
| 61 | S&F premium quality 5mm thick beveled edge mirror of selected guality glass, mounted on 6mm thickwater proof plywood and fixed to wooden plugs with chronium plated brass screws fixing in repair complete all as specified and as directed. |
| 62 | Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender