Tender For Special Repair To Ber Ac Plant At Ses At Af Stn Bkt.
Tender Value
39 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
4 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Ber Ac Plant At Ses At Af Stn Bkt.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulders built in cement mortar including all quions, arches, pillers etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed. |
| 2 | M&L for brick work with sub class B brick (using old size bricks) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | Taking down cement plaster on brick walls etc including racking out joints, hacking for keys in scrubbing down and washing with water etc complete all as specified and directed. |
| 4 | M&L for 15mm thick rendering on fair faces of brick work in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | Material and labour for rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 6 | Material and labour for 10 mm thick cement plaster in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | Supply only liquid water proofing compound, ISI marked all as specified and directed. |
| 8 | M&L for applying 1 mm thick wall care white putty in two layers with and including plaster of Paris wherever required on walls complete all as specified and directed. |
| 9 | M&L for preparation of newly putty surfaces of walls and applying two or more coats of 100% premium acrylic emulsion in Comouflaging tri or other pattern having VOC less than 50gm/Ltr and UV resitance as per IS 15489-2004 alkali and fungal resistance, dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @1.43 ltrs/ 10 Sqm over and including priming coat of exterior primer applied @ 0.9 ltr/10sqm over new by prepare surface and height upto 9 meter complete all as specified and directed.Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) |
| 10 | M&L for preparation of surface and applying two coats of oil emulsion distemper over one coat of primer on new putty surfaces of walls complete all as specified and directed. |
| 11 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash with appropiate binder fevicol or equivalent complete all as specified and directed. |
| 12 | M&L for preparation and applying one coat of white wash on old surfaces of ceiling complete all as specified and directed |
| 13 | M&L for preparation of old painted steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 14 | Taking down chowkats or frames area exceeding 1.50 Sqm and not exceeding 4.00 Sqm (without taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1, complete all as specified and as directed.(Note:- The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid) |
| 15 | Supply & fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window & other Frames/ Chowkhat with double ribet of size 125x65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawl strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/border proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 16 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type 10mm deep CNC moulding design with 0.12 micron laminated both sides of panelled shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/border proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 17 | Supply & fixing of 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 18 | Supply & fixing of 150 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 19 | Supply & fixing of 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 20 | S&F 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc.complete all as specified and directed. |
| 21 | S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed. |
| 22 | S&F double legged door stopper of overall length of cover plate 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors and rubber complete all as specified and directed. |
| 23 | Supply & fixing of vajra series windows made of pre painted steel (base steel as per IS 513 of 0.58 mm thick \\"D\\" Quality galvanised as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns with alkyd backer . Section for frame should be of 72X55mm, centre mullion should be of 72X50mm, section for fixed glass beading should be of 12X12mm and section for shutter glass should be of 52X25mm. Outer frame & mullion sections should be of 12X12 mm and section for shutter glass should be of 52X25mm. Outer frame & mulliion sections to have rebate for glazed shutters, fly mesh and 20mm provision for guard bar / grils fly mesh shutter section should be of 20X40mm. Tje sections are to be cut to length mitre jointed with corner brackets. centre mullion to be fixed with mullion cap . shutter brackets with a inbuilt pvc lip to be fixed in a way that the lip overlaps the shutter corners and are not exposed. Elixir or equivalent stay handles 2Nos of heavy duty stain less steel pivot hinges shall be provided shutter. The windows should be panelled with 4mm thick plain float glass. Rubber Gaskets are provided all around the glass. The above frame should be fixed to the concrete/masonary wall by means of self expanding, screws. Including 10mm square guard bar with 152.4mm pitch,complete for finished item of work including of all taxes |
| 24 | M & L for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified & directed. |
| 25 | Dismantling of floor hearth and wall tiling including mortar bedding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 26 | Material and labour for machine cut Kota stone slab (Minimum size shall be 550x550 mm) flooring 18-22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing complete, laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) complete all as specified and directed. |
| 27 | Material and labour for Machine cut Kota stone 16-18mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing set and jointed in neat cement slurry and pointed in white or colour cement to match, the shade/colour of tiles over and including 10 mm thick rendering in cement mortar 1:4, as in riser of steps,skirting, dado & other vertical surfaces complete all as specified and directed. |
| 28 | M &L for half rounding to edges of Kota, Granite & Cudappah stone slabs one edge such as in steps, cooking platform, and other similar locations etc. complete all as specified and directed. |
| 29 | M&L for Mirror polishing of old Kota stone flooring including pointing in colour cement to match complete all as specified and directed. |
| 30 | Material & Labour for coloured glazed ceramic tiles in vertical surface of sized 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface complete all as specified and directed. |
| 31 | Dismantling of old ceiling boards (fibre pulp, insulation, etc) any thickness including cover fillets/snap grid complete all as specified and directed |
| 32 | M & L for Suspended false ceiling system using Chicago metallic (E - grid) exposed suspended system, grid size 600mm x 600mm comprising of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 mm+ PPPCGS/0.3 mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 kg for 600mm length) and Wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC (High pressure steam cured) pre primed, self embossed, textured designer board to be placed in the grid system duly suspended with 4mm dia GI wire hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed. |
| 33 | Demolition of RCC of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition and provided for including reinforcement and removing debris complete all as specified and directed. |
| 34 | Material and labour for mild steel TMT bars 10mm dia an over, cut to length, bent to shape required, including cranking, bendng spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anneled) not less than 0.9mm dia or securring with clips complete all as specified and directed. |
| 35 | M&L for providing RCC 1:2:4 type B1 using 20mm graded stone aggregate) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specfied and directed. |
| 36 | Demolition of cement concrete (unreinforced) in the ground floors and paving not exc. 15 cm thickness ( below or above ground level) and disposing of the rubbish material where directed complete all as specified and directed. |
| 37 | M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base, foundation, filling and mass concrete complete all as specified and dirrected. |
| 38 | M&L for sand filling under floors, or in foundations including watering and consolidation complete all as specified and directed. |
| 39 | M&L for machine pressed precast interlocking paver block (rubber moulding) any shape and size confirming to IS 15658 :2006 of 80mm thick, M-35 grade, with grey cement and no pigment complete all as specified and directed. |
| 40 | M&L for Vitrified out door tiles size 30 cm x 30 cm or 40 cm x 40 cm and 10-12 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 complete all as specified and directed. Please Enable Macros to View BoQ information |
| 41 | M&L for Vitrified out door tiles size 30 cm x 30 cm or 40 cm x 40 cm and 10-12 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender