Tender For Special Repair To Bldg No T-21 (Eme & Ord Office) , Toilet Near Io Det Living Bldg At Saa Under Ge(S) Tezpur
Tender Value
42.53 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
9 days left
EMD
85100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No T-21 (Eme & Ord Office) , Toilet Near Io Det Living Bldg At Saa Under Ge(S) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats incl shutterrs n exc 1.5 sqm (without taking off shutters from the frame).complete all as specified and as directed. |
| 2 | Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) exc. 1.50 Sqm but not exc. 4.00 Sqm, complete all as specified and as directed. |
| 3 | Demolition of RCC of any description specifically provided for. complete all as specified and as directed. |
| 4 | Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 5 | M & L for 75mm thick Plain Cement concrete 1:3:6 type C2 using 40mm gradded agg as in sub-base.complete all as specified and as directed. |
| 6 | Dismantaling of timber framed scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed. |
| 7 | Taking up or down steel tubing of size 20 mm and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 8 | S & F in repairs 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete as specified and directed |
| 9 | Taking up or down steel tubing of size 15 mm and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 10 | S&F 20mm bore CPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors incl conceiling/ clamping etc including all fittings and taking down or up of GI/CPVC/ UPVC Pipe, complete all as specified and directed |
| 11 | S&F 15mm bore CPVC pipes of pressure rating 10 kgf/cm2 fixed complete towalls, ceilings or in floors incl conceiling/ clamping etc including all fittings and taking down or up of GI/CPVC/ UPVC Pipe, complete all as specified and directed. |
| 12 | M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends and edges of landings, steps, cills, sunshades, shelves and lintels etc; and cutting chases for concealed water tubing and making good, cutting not exceeding 10 cm girth. complete all as specified and as directed. |
| 13 | Demolition of brick work built in cement mortar including all quions, arches pillars etc.complete all as specified and directed. |
| 14 | M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 complete all as specified and directed |
| 15 | M&L brick work with sub class B brick straight orcurved on plan exc 6 mtr mean radius in cm (1:6) complete all as specified and as directed. |
| 16 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement lime or cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and as directed. |
| 17 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed. |
| 18 | Dismantling of Boarding, any description and any position, fixed with Nails, complete all as specified and as directed. |
| 19 | M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 20 | M & L Hardcore of guage exc 63mm but n exc 150mm deposited spread and levelled in layers n. exc 7.5cm thick, with broken stone, watered and rolled/rammed to a true surface, complete all as specified and as directed. |
| 21 | M&L for cement concrete Type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete. complete all as specified and as directed. |
| 22 | Taking down cement plastering,on brick or stone walls etc, including wire mesh and raking out joints, hacking for key scrubbing down with water etc. complete all as specified and as directed. |
| 23 | M&L 10 mm thick plastering on other than fair faces of wall surfaces in cm (1:6) finished even & smooth (without using extra lime or cement) complete all as specified and directed |
| 24 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even & smooth (without using extra lime or cement) complete all as specified and directed |
| 25 | M&L applying two coats of distempering with oil emulsion, over providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.complete all as specified and as directed. |
| 26 | M & L for preparation of new plastered surfaces of walls and applying two coats of weather shield exterior emulsion paint over a coat of white primerover a coat of thick wall care putty complete all as specified and directed |
| 27 | M & L for preparation of new plastered surfaces of walls and applying two coats of weather shield exterior emulsion paint over a coat of white primerover a coat of 3 mm thick wall care putty complete all as specified and directed |
| 28 | M & L for preparation of Old plastered surfaces of walls and applying two coats of weather shield exterior emulsion paint over a coat of white primerover a coat of 3 mm thick wall care putty complete all as specified and directed |
| 29 | Supply only integral water proofing compound complete all as specified and as directed. |
| 30 | M & L Screed Bed or Bedding Layer 15mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed |
| 31 | M & L for Rendering or Bedding Layer 10mm thick in Cement Mortar 1:4 on Walls, etc. for fixing Tiles as Skirtings, Dados, etc, complete all as specified and directed. |
| 32 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 33 | M&L Glazed/Mat Finished Ceramic tiles 8 to 10 mm thick (square/ rectangular) any shade, polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 34 | M&L Glazed/Mat Finished Ceramic tiles 8 to 10 mm thick (square/ rectangular) any shade, polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 10mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 35 | M & L for 25mm thick Plain Cement concrete 1:2:4 type B-0 using 20mm gradded agg as in sub-base. complete all as specified and as directed. |
| 36 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 37 | S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7 to 8 mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed with epoxy filler to match over 10mm screed bed in Cement mortar 1:4 complete all as specified and as directed. |
| 38 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of framemade out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 39 | S & F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing. complete all as specified and as directed. |
| 40 | S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in chowkhat complete all as per manufacturer instruction. complete all as specified and as directed. |
| 41 | Supply and fix, 35 mm thick, flush moulded door shutters, solid core construction, with a decorative veneer surface finished both faces and designed to be resistant to warping and scratch both sides complete all as specified and directed |
| 42 | S & F powder coated Anodised aluminium frame for doors, three track windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed |
| 43 | S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, tower bolts, handles, etc. complete all as specified and directed |
| 44 | S&F 4 mm thick heat absorbing/tinted/shaded glass for windows/doors of any size with aluminium bedding and complete all as specified and directed. |
| 45 | S&F 4 mm thick frosted/ pin headed glass in ventilator shutters incl hacking out complete all as specified and directed by Engr-in-Charge |
| 46 | S & F in repairs Brass mortice lock verticle type 75 mm 4/6 levers complete all as specified and directed |
| 47 | S/F 4mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane fixed in aluminium frame complete all as specified and as directed. |
| 48 | S/F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and as directed. |
| 49 | S & F 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 50 | S&F 200 mm aluminium anodised barrel tower bolt, of extruded section and fixed in position complete all as specified and as directed. |
| 51 | S & F 75mm size MS butt hinges, medium weight, cold rolled. complete all as specified and as directed. |
| 52 | S & F 150 mm size Extruded Brass handles, fabricated type, anodised complete all as specified and as directed. |
| 53 | S&F 200 mm Brass tower bolt, of extruded section and fixed in position complete all as specified and as directed. |
| 54 | S & F 100mm size SS butt hinges, medium weight, cold rolled. complete all as specified and as directed. |
| 55 | S & F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 56 | Dismantling Structural steel work includings door, gates, etc and similar works complete all as specified and as directed. |
| 57 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction but welded tubes conforming to IS- 1161-1979 grade St-240 complete all as specified and directed |
| 58 | S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 290 (Gde E-165 ) complete all as specified and directed. |
| 59 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) , steel tubes including distance pieces, cleats etc. complete all as specified and as directed. |
| 60 | S&F Mild steel screw bolts (machine made), diameter of neck 16 to 20mm, length of bolt exc 22.5cm and n exc 30cm longwith hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed. |
| 61 | Preparation of new steel surfaces exc 10 cm width or grith and applying 2 coats of synthetic enamel paint over a coat of red oxide. complete all as specified and as directed. |
| 62 | Dismantling of steel/galvised sheet corrugated / Semi corrugated sheets in wall cladding or in roof covering complete all as specified and as directed. |
| 63 | M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with L type J type or cranked hook bolts complete all as specified and as directed. |
| 64 | M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/eaves board, fixed wiith L type J type or cranked hook bolts complete all as specified and as directed. |
| 65 | Dismantling of wall & ceiling Boards (fibre,pulp, insulation etc), or insulation board/slabs/ blankets ,any thickness, including cover fillets.complete all as specified and as directed. |
| 66 | M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed. |
| 67 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.35 mm thick with two unequal flanges of 23x20x18mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 68 | S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x.55 mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 2 mm dia double GI wire with end adjuster at one end only suspender including S & F of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel truss or any type of truss complete all as specified and directed. |
| 69 | M/L 75mm thick P.C.C 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection including forming construction joint filled with CM(1:6). complete all as specified and as directed. |
| 70 | M &L PCC (1:3:6) type C-2 as in drain/surface channel and similar work .complete all as specified and as directed. |
| 71 | S&F 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints fixed to walls.complete all as specified and as directed. |
| 72 | S&F 75 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints fixed to walls.complete all as specified and as directed. |
| 73 | S&F 110mm bore PVC (SWR) bend complete all as specified and as directed. |
| 74 | S&F 75mm bore PVC (SWR) bend complete all as specified and as directed. |
| 75 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 76 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 77 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 78 | S&F in repairs vitreous China squatting pan, ‘Orissa’pattern, size 680 x 470 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed. |
| 79 | S&F in repairs 10 litre capacity PVC low level flushing cistern including pull chain & flush pipe, connection pipe etc complete all as specified & directed. |
| 80 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 81 | S & F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed |
| 82 | S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes. complete all as specified and as directed. |
| 83 | S&F in repairs 15 mm bore stop/angle valve fency type with capstan heads, chromium plated screwed down, high pressure, with crutel or butterfly handle, screwed both ends for iron pipe or for unions. complete all as specified and as directed. |
| 84 | S&F in repairs pillar taps fency type with capstan heads, chromium plated, srewed down high pressure, with or without lettered `Hot' or `Cold' with long srewed shanks and fly-nuts, screwed for iron pipe and fixed in 15 mm bore. complete all as specified and as directed. |
| 85 | S&F in repairs 15mm bore 125mm size type brass chromium plated shower rose, complete all as specified and as directed |
| 86 | S & F in repairs vitreous china white wash hand basin glat back of size 550 x 400 mm including brackets CP waste pipe and waste coupling 32 mm and PVC waste pipe and 15mm PVC connection complete all as specified and as directed. |
| 87 | S & F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed. |
| 88 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 89 | S & F, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern) but including seat cover white closed type and flush pipe complete all as specified and directed |
| 90 | S&F in repairs two way bib cock 15mm bore, two way, chromium plated, fixed to GI or steel tubing incl fittings complete all as specified and directed. |
| 91 | Supply and fix,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed. |
| 92 | Supply and fix,as in repair, 32/40 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed. |
| 93 | S&F in repairs stainless steel grating round/ Square 100/75mm dia fixed with solvent cement complete all as specified and directed. |
| 94 | Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks over compacted sand bedding layer, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 95 | M&L Pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 96 | M&L for RCC type B1 1:2:4 (20 mm graded agg) as slab supported on wall , beams columns in floor, roofs landing and the like complete all as specified and as directed. |
| 97 | Use & Waste of Fromwork to sides and soffits of floor or lintel beam , beam haunching, girders ,lintels shevles inclusidng support and hangs complete all as specified and as directed. |
| 98 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 99 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including cutting chases of exsisting wall for wall taking out concealed conduit ec. and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-below complete all as specified and as directed. |
| 100 | Taking down main switches and DBs of any type and make including wooden board / junction box. complete all as specified and as directed. |
| 101 | M&L for concealed point wiring for one Light/ Fan/ Bell point complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20 mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, with and including modular metal flush box and Modular white Cover Plate with Frame for fixing modular switches, sockets fan regulators etc duly earthed. Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles complete all as specified and as directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price. |
| 102 | All as per item No. 101 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and as directed. |
| 103 | All as per item No. 101 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and as directed. |
| 104 | All as per item No. 101 here - in - before but for 5 Amps socket point on the same board controlled by one switch.complete all as specified and as directed. |
| 105 | M&L for switch piano (flush button type) single pole, one way, 5 Amps complete all as specified and directed. |
| 106 | M&L for switch socket out let 2 in one, 5 Amps, 240 Volts flush type,complete all as specified and directed. |
| 107 | M&L for switch socket combination 2 in One , 3 pin 5 Amps & 16 Amps flush type, universal complete all as specified and directed. |
| 108 | S&F modular switch flush type, 6 Amp, one way ,1 module complete all as specified and as directed. |
| 109 | S&F modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and as directed. |
| 110 | S&F modular switch, 16 Amp flush type 1 module complete all as specified and as directed. |
| 111 | S&F modular socket outlet, 3 pin, 6/16 Amp flush type 2 module complete all as specified and as directed. |
| 112 | S&F modular Fan Regulator stepped type 2 module ,120W complete all as specified and as directed. |
| 113 | S&F in modular bell push, flush type, 5 Amp,1 module complete all as specified and as directed. |
| 114 | S&F call bell Dingdong type AC 230 Volts single pole. complete all as specified and as directed. |
| 115 | S&F ceiling rose surface backelite three terminals. complete all as specified and as directed. |
| 116 | Supply and fix LED tube light fitting of 18 W with tube (4 Ft) 240 V Wall mounted LED batten Aluminium houseing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection. complete all as specified and as directed. |
| 117 | All as item no 116 above but LED batten 9 watt 2 ft long complete all as specified and as directed. |
| 118 | S&F on wall security light luminaire for 1x 25 W LED with deep drawn housing complete with GI Bracket of suitable size and including cable for connection from ceiling rose with 3 core 1.5 Sqmm PVC insulated stranded copper conductor complete all as specified and as directed. |
| 119 | Supply and fix for Recess/Surface mounting high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 36 watt 6500 K LED CDL light, complete all as specified and as directed. |
| 120 | Supply & Fix electric storage heater of 25 Ltr capacity, 5 Star in replacement with heating element 2000 W, thermostat, inlet, outlet connection pipe and air vent connections including all fixing arrangement for mounting on wall and necessary water inlet and outlet connections complete all as specified and directed. |
| 121 | M&L complete for metal body exhaust fan of size 300 mm sweep, single phase,230 volts Ac with louver shutter /grill and connection complete incl cutting hole and making good disturbed surface and necessary fixing arrangements.complete all as specified and as directed. |
| 122 | M&L in repair for sub main wiring with Four run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and two run of copper earth wire 4 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified and as directed. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length. |
| 123 | Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , 200 A copper bus bar , IP 43, Tripple pole and neutral (TPN) 415 Volt , double door, suitable for 4 way with dim rail earth and neutral bar complete all as specified and as directed. |
| 124 | S&F metal clad socket out let with MCB Double Pole 20-32 Amp, 240 V including sheet metal enclosure complete fixed on board including complete electrical connection by proper size of copper lugs complete all as specified and as directed. |
| 125 | S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 100 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and as directed. |
| 126 | S & F MCB 'C' series Triple pole and nutral 100 Amps, breaking capacity 10KA complete all as specified and directed |
| 127 | S & F MCB 'C' series Single pole and nutral 40-63 Amps, breaking capacity 10KA,complete all as specified and directed |
| 128 | S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed |
| 129 | Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm, 4 core. complete all as specified and as directed.Note: 1. Excavation and earth work will be measured and paid seperately. |
| 130 | Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 2 core. complete all as specified and as directed.Note: 1. Excavation and earth work will be measured and paid seperately. |
| 131 | Excavation in trenches, in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and all as directed. |
| 132 | M&L for 80 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed. |
| 133 | M&L for 50 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed. |
| 134 | M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed. |
| 135 | Supply and laying of well burnt bricks, sub class 'B' laid flat in trenches for protection of cable complete all as specified and directed. |
| 136 | Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick complete all as specified and directed by Engr-in-Charge. |
| 137 | Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and as directed. |
| 138 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I |
| 139 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) including provision of fan hook complete all as specified and directed |
| 140 | Supply and fix in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 1000 ltrs all as specified in SSR Part I including all its accessories complete all specified and directed. |
| 141 | Taking up GI water tubing 25 mm bore from trenches / floor including all fittings, segregated and stacking the pipe complete all as specified and as directed. |
| 142 | Supply, lay and fix 25 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and as directed. |
| 143 | Supply and fix Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 144 | Supply and fix Ball valves 25 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 145 | NOTES:1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender