Tender For special Repairs To Overhead And Ug Cable System And Connected Work At Lebong And special Repair To Em INSTALLATION Under Age (I) Darjeeling
Tender Value
48.15 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
22 days left
EMD
96300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gangtok → sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repairs To Overhead And Ug Cable System And Connected Work At Lebong And special Repair To Em INSTALLATION Under Age (I) Darjeeling
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old unserviceable UG cable 240 sqmm any make complete all as specified and directed. |
| 2 | Taking down old unserviceable UG cable 16 sqmm 4 core to 35 sq mm 3.5 core complete all as specified and directed. |
| 3 | Taking down old unserviceable UG cable 10 sqmm 2 core to 10 sqmm 4 core complete all as specified and directed. |
| 4 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, laying of underground cables etc. or for shafts, wells, cesspits, manholes, pier holes, under groung cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil, complete all as specified and directed. |
| 5 | M&L for Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated hard/dense soil complete all as specified and directed. |
| 6 | M&L for Removal of surplus soil to a distance not exceeding 50 m and depositing where directed by Engr-in-charge. |
| 7 | Supply and lay in trenches, fixed to wall/pole DWC Pipes (Double Wall Corrugated) of dia 90 MM for carrying UG Cable complete all as specified and directed. |
| 8 | Supply and lay in trenches, fixed to wall/pole DWC Pipes (Double Wall Corrugated) of dia 50 MM for carrying UG Cable complete all as specified and directed. |
| 9 | Supply and lay in trenches, fixed to wall/pole DWC Pipes (Double Wall Corrugated) of dia 40 MM for carrying UG Cable complete all as specified and directed. |
| 10 | M&L GI pipe light grade 25 mm dia complete with all fitting laid in ground/trench for protection of cable all as directed and specified. |
| 11 | M&L GI pipe light grade 40 mm dia complete with all fitting laid in ground/trench for protection of cable all as directed and specified. |
| 12 | M&L GI pipe light grade 80 mm dia complete with all fitting laid in ground/trench for protection of cable all as directed and specified. |
| 13 | Supply and lay in trenches, fixed to wall/pole UG Cable XLPE insulated screened PVC beded galvanised steel strip or wire armed heavy duty electric cable with multi stranded Aluminium conductor, 1100V grade of following size complete all as specified and directed. |
| 14 | ditto all as above item No 13 but size 240 Sqmm 3.5 Core |
| 15 | ditto all as above item No 13 but size 35 Sqmm 3.5 Core |
| 16 | (ditto all as above item No 13 but size 25 Sqmm 4 Core |
| 17 | ditto all as above item No 13 but size 16 Sqmm 4 Core |
| 18 | ditto all as above item No 13 but size 10 Sqmm 4 Core |
| 19 | ditto all as above item No 13but size 10 Sqmm 2 Core |
| 20 | Supply, lay, commissioning and testing of cable jointing Kit for 1100 V grade cable for outdoor End Termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 240 Sqmm in any posn panel, pole, plinth etc complete all as specified and directed. |
| 21 | Supply, lay, commissioning and testing of cable jointing Kit for 1100 V grade cable for outdoor End termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25 Sqmm to 50 Sqmm in any posn panel, pole, plinth etc complete all as specified and directed. |
| 22 | Supply, lay, commissioning and testing of cable jointing Kit for 1100 V grade cable for outdoor End termination heat shrink type joint complete with jointing material and accessories suitable for 6 sqmm 2 core to 16 Sqmm 4 core armoured aluminium conductor cable in any posn panel, pole, plinth etc complete all as specified and directed. |
| 23 | Supply and fixing in Repairs/Replacement of MCB single pole, single phase circuit of 6 to 32 Amp, breaking capacity 10 KA,\\"C\\" curve,230V complete all as specified and directed. Make: Cat Part No BB10320CLK of L&k or equivalent to Schneider/ABB/ Siemens. |
| 24 | M&L for fabricated CECA outdoor junction box (250mm X 200mm X 150mm) powder coated with hinge operated front opening door suitable for cacle entry and oit upto 16sqmm four core duly fixed with dinrail and connector/bus bars suitable for 3 phase cable incl clamps nut, bolts and washer etc complete all as specified and as directed. |
| 25 | Material and Labour for earthing complete with GI earth plate electrode 600 x 600 x 3.15 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected togalvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Pt I including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick RCC ( 1:2:4) type B-1 cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar) including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade) wire mesh, lugs, complete in all respect, GI earth strip protected by 40 mm bore (light grade) galvanized iron pipe and other end connected with main switch board or earthing test point as directed including proper lugs, including disposal of soil to a distance not exceeding 50 mtr and necessary testing on completion complete all as specified and as directed. |
| 26 | Supply, install, commissioning and testing of LT panel board, outdoor cubical type, from CPRI approved panel fabricator, front and back, both side openable type, fixed with butt hinges and locking arrangements with latches, fabricated with CRCA sheet of 2mm thickness for inner sheet and 3.15mm for outer sheet, thick hinged type door for individual MCCBs/ MCBs/ premium rubber gasket, supported on 50x50x6mm angle iron and t section frame, dust and vermin proof complete with COPPER busbars, 4 nos, 300A rated capacity mounted on porcelain insulators, totally enclosed chamber for protection from 3 phase 415V supply, with suitable rating of copper frlsh wires for control wiring, suitable for mounting on PCC foundation with suitable size of nuts, washers and bolts. Panel shall be powder coated RAL 7032 along with 7 tank processing. Angle iron frame shall be painted with black synthetic enamel paint over a paint of red oxide primer complete, connecting UG cables with suitable size glands and lugs to accomodate the components complete all as specified and as directed. [Note:- Drawing & design as per CPRI norms shall be approved from AGE (I). (ii) Certificate from panel builder shall be submitted to the department] |
| 27 | INCOMING :-(a) 250A, 4P, 36KA, MCCB - 01 Nos- 1 TM MCCB Adjustable overload settings: 0.67 - 1.0 x In Ics=100% Icu (EXTENDED ROM & SPREADER LINK ) Make - Cat part No DZ4F0250DXD1AOOOO of LK (b) Auxillary Contact/ Trip Alarm Contact. (c) LED Indicating Lamps R, Y, B. (d) LED Indicating Lamps (ON OFF TRIP)(e) MODBUS RTU to TCP/IP Gateway. (f) Digital MFM - 1 set MFM 4405 LED meter Cl 0.5S with RS485 - 01 pcs(g) 250/5A CT COIL - 03 Pcs(h) 1-6A SP C Curve 10KA MCB (protection For LED lamps & MFM) with True contact indication for individual pole - 03 pcs |
| 28 | OUTGOING :- (a) 100A 4P 18KA MCCB - 02 Nos, Ics=100% Icu with Adjustable Overload Setting: 0.8 - 1.0 x In. Make - Cat Part No - CM90518OOFO of LK. (b) Auxillary Contact/ Trip Alarm Contact. (c) LED Indicating Lamps (ON OFF TRIP)(d) 1-6A SP C Curve 10KA MCB (protection For LED lamps) with True contact indication for individual pole(e) 63A 4P 18KA MCCB - 03 Nos, Ics=100% Icu with Adjustable Overload Setting: 0.8 - 1.0 x In. (f) Auxillary Contact/ Trip Alarm Contact. (g) LED Indicating Lamps (ON OFF TRIP)(h) 1-6A SP C Curve 10KA MCB (protection For LED lamps) with True contact indication for individual pole(j) Outgoings: 32A 1P 10KA MCB -1 no (32A 10KA MCB C Curve with True contact indication for individual pole. Make - Cat Part No BB10320C of LK or equivalent to ABB/Siemens |
| 29 | M&L for fabrication of LED glow sign board size 4 x 3 ft complete all in repect as per specification below :-(a) Frame Made of MS square bar of size 25x25mm (medium).(b) Display surface front face made 2 mm thick acrylic sheet/3mm ACP sheet/high-quality flex. MS square bar of size 25x25mm with anti-rust coating with powder coated GT sheet No 25. (c) LED illumination fitted with high-brightness LED modules/strip.(d) Back panel made of GI sheet (0.5-0.8mm thick)/ACP board properly fixed to frame. (e) All components weatherproof and suitable for humid/outdoor conditions. proper sealing to prevent dust and moisture ingress. |
| 30 | M&L for cutting existing road/hard standing not exc 20x45 cm in wide & depth getting out excavated material for laying cable/GI tube, returning filling & well ramming watering finish suraface 10 cm from top using PCC 1:3:6; including removal of surplase soil complete all as mspecified and directed by Engr-in-Charge. |
| 31 | Dismantling of unserviceable ACSR or AAC conductor of any type and size from over head electric line carefully with out making any damage to the other existing lines and removing from site complete all as specified and as directed. |
| 32 | M & L for dismantling Earth wire or copper conductor, service feeder or distributor span complete all as directed. |
| 33 | M & L for dismantling & taking down insulators any type and size complete all as diredted. |
| 34 | M & L for dismantling & taking down cross arms or MS channel or angle section etc complete all as directed. |
| 35 | M & L for dismantling & taking down Stay Assembly of any size and type etc complete and diposited to MES store yard complete all as directed. |
| 36 | Dismantiling/taking out old unserviceable steel poles any type/size and setting aside for re-use within 2.0Km for serviceable poles or removing unserviceable poles from the site of work, complete all as specified and directed. |
| 37 | M&L for sand cushioning for protection of PVC cable with approved sand of uniform thickness, laid dry, by filling in trenches and punning to proper required cover all as directed. |
| 38 | M&L for laying un-reinforced precast concrete cable cover, class HV , type 1 with , size 300 mmX180mmX 40mm complete all as directed. |
| 39 | Supply & lay in repair, connection testing and commissioning of 3 core, 95 Sqmm, 11000 Volts grade(Earthed) XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminum conductor laid in trench/under ground/wall/surafce/tunnel/duct including taking out unserviceable burnt out cable complete all as directed. |
| 40 | Supply and fix Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm |
| 41 | Supply and fixing cable route indicator, made of MS sheet of size 200 mm x 150 mm x 3 mm thick, spot welded with angle iron of size 40 x 40 x 5 mm thick, 750 mm long embedded in PCC (1:2:4) type B-2( using 40mm graded crushed stone aggregate) block 30cm x 30cm x 40cm in ground including one coat of synthetic enamel black paint over one coat of red oxide zinc chrome primer and writing with white paint showing size of cable HT complete all as directed & specified. |
| 42 | Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth strip 32 x 6 mm (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no 3 of SSR Part I including necessary excavation and earth work in any type of soil PCC (1:3:6) type C1 chamber with RCC (1:2:4) type B1, 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 40 mm dia light grade for protection of earth electrode 20 mm dia for watering all as specified and directed and tested on completion. |
| 43 | Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates.Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender