Tender For Repairs/Renovation Of Bathroom, Toilet With Tiles (Total 150 Qtrs.) & Provision Of Stainless Steel Sink In Kitchen (Total 50 Qtrs.) Of Type I At Ofi Estate.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Oct 2026
12 days left
EMD
97999
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs/Renovation Of Bathroom, Toilet With Tiles (Total 150 Qtrs.) & Provision Of Stainless Steel Sink In Kitchen (Total 50 Qtrs.) Of Type I At Ofi Estate.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-Oct-2026 |
| 2 | 16-Oct-2026 | Extension in bid submission end date | Date | 31-Oct-2026 |
| 3 | 10-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 2 | M&L Rendering 10mm thick plaster on fair faces of brick work or concrete surfaces in Cement mortar 1:4 etc as directed |
| 3 | Dubbing out cement plaster 1:4 average 10mm thick on irregular face of walls |
| 4 | Demolition of Cement Concrete in ground floors/ ist floor and pavings n exc 15 cm thickness (below or above ground level) etc as directed |
| 5 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc as directed.Make- Cera, Franke, Hindware, Futura and Nirali or its equivalent |
| 6 | Cutting holes not exc. 100 sq cm into or through cement concrete slabs, chajjas, etc. reinforced or otherwise all as directed. |
| 7 | S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) etc as ditected. Make- Hindware, Parryware, Jaquar, Cera and Essco or its equivalent |
| 8 | S&F PVC valveless, syphonic action type, flushing cistern 10 liter , low level, white, with inlet, ball valve, float and handle including brackets etc as ditected. Make- Hindware, Parryware, Jaquar and Cera or its equivalent |
| 9 | S&F PVC (SWR)75m dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Make- Astral, Supreme, Prince, Ashirwad and Finolex or its equivalent |
| 10 | S&F PVC (SWR)110m dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc as directed. Make- Astral, Supreme, Prince, Ashirwad and Finolex or its equivalent |
| 11 | M&LBrick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar 1:4 etc as directed. |
| 12 | Supply & fixing PVC (SWR) 75mm dia bends any radiusetc. As directed ® |
| 13 | Supply & fixing 110mm dia. PVC (SWR) junction single, (Single T) equal or unequal® etc. as directed |
| 14 | Supply & fixing Fe- 290 (Gde E- 165) Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete etc. as directed® |
| 15 | Taking down Chowkhats or frames exc 1.5 sq. M but n exc 4 sq. M each. as directed. |
| 16 | Taking down Shutters of any description exc 1 sq. m & n exc 2sq.m reifing in same opening etc. as directed. |
| 17 | S&F Figured glass,3mm thick pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane etc. as directed. |
| 18 | S&F 75mm dia. PVC (SWR) floor trap, plain with grating including jointing with solvent cement etc. as directed. |
| 19 | S&F PVC connections 15mm size with PTMT nuts of length 600mm etc. as directed. |
| 20 | Cutting 15 mm existing steel tubing for alterations or additions (Each cut measured) as directed. as directed. |
| 21 | S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed etc.Make- Argent Industries, Aluminium Udyog, Bansal Industries or its equivalent |
| 22 | S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised as directed.Make- Argent Industries, Aluminium Udyog, Bansal Industries or its equivalent |
| 23 | S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed etc. as directed |
| 24 | M&L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete etc. as directed. |
| 25 | M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 etc. as directed. |
| 26 | M&L Glazed ceramic Coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match ®etc. as directed.Make- Kajaria Ceramics, Somany Creamics, Orient Bell Tiles and H & R Johnson or its equivalent |
| 27 | M&L Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ®etc. as directed.Make- Kajaria Ceramics, Somany Creamics, Orient Bell Tiles and H & R Johnson or its equivalent |
| 28 | M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 etc. as directed. |
| 29 | M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations ®etc. as directed® |
| 30 | Supply & Lying CPVC pipes 16 mm dia. with SDR with SDR 13.5 pipes & plain CPVC SDR 11with all required fittings etc. as directed. Make- Astral, Supreme, Prince, Ashirwad and Finolex or its equivalent |
| 31 | Supply & fixing Brass Elbow 16 mm dia to CPVC pipiline all as directed. |
| 32 | S&F Male Brass Threaded Adaptor 16 mm dia(MTA/ MBTA) ) all as directed |
| 33 | S&F Female Brass Threaded Adaptor 16mm dia (FTA/ FBTA all as directed |
| 34 | S&F Stop valve of PTMT any colour high pressure screwed and fixed. (Minimum weight 15mm-90gms/ 20mm92gms) all as directed. Make- Prayag, Jaquar, Koher, Hindware, Cera and RN Valves or its equivalent |
| 35 | Fixing only Chromium plated shower roses with or without swivel joints, any size, all as directed. |
| 36 | Supply & fixing 20mm dia. Male Brass Threaded Adaptor (MTA/ MBTA) )®as directed. |
| 37 | Supply & Fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.etc. as directed. Make- KAKA, Veka India, Eurostar, Supreme and Shakti Hormann or its equivalent |
| 38 | M&L Preparation of old painted wall/ceiling surface Two coat of distemper oil emulsion etc. Complete all as per directed. |
| 39 | M&L Preparation of old painted wall surface suply & apply Two coat of distemper oil emulsion etc. Complete all as per directed. |
| 40 | Preparation of new steel surface free from dust, dirt, loose scales etc. and supply & apply one coat red oxide primer & Two coats Synthetic Enamel Paint on steel surfaces etc. girth exc.10cm as per specification and as directed |
| 41 | Taking up or down 15 mm steel tubing and connections, including cleaning for refixing or removal to store all as per directed. |
| 42 | Low density polyethylene pipes 40 mm dia (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. |
| 43 | S&F grating doom 100mm dia of PTMT(Minimum weight 25gms) |
| 44 | Supply & fixing of 15 MM Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed and fixed all as directed. Make- Jaquar, Prayag, Johnson and 10x or its equivalent Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 31, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 12 days
Oct 17, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender