Tender For Provision Of 02 X Scooter / Cycle Stand For 20 X Two Wheelers Each At Kargil And Sehjra Bty Under Ge Golconda
Tender Value
4.85 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
17 days left
EMD
10000
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of 02 X Scooter / Cycle Stand For 20 X Two Wheelers Each At Kargil And Sehjra Bty Under Ge Golconda
BOQ
| Sl. No. | Item Description |
| 1 | BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) File No 8176/E8 Tender Inviting Authority: GARRISON ENGINEER GOLCONDA Name of Work: PROVISION OF 02 x SCOOTER / CYCLE STAND FOR 20 X TWO WHEELERS EACH AT KARGIL AND SEHJRA BTY UNDER GE GOLCONDA Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder including all TaxesRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil |
| 3 | M&L for plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in foundation filling, mass concrete and similar works and for MS Pipe fixing complete all as specified and as directed. |
| 4 | M&L for rolled MS plates welded for posts fixing of rafters/ holdfasts or other connecting members , etc. Fe 410-W (Gde-E-250) quality-A, etc complete all as specified and directed. |
| 5 | M&L for rolled miled steel work in Square/ tubular trusses, vertical post, rafters & Purlins etc including special shaped washer etc using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade st-240 complete all as specified and directed. |
| 6 | M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 7 | M & L for pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 8 | Surface excavation n exe (not exceeding) 30 cm dep and averaging 15 cm deep and getting out soft/ loose soil complete all as specified and as directed. |
| 9 | M&L for Returning, filling in, inclu spreading, levelling, watering and well ramming in layers not exc 25cm in soil complete all as specified and as directed. |
| 10 | M&L for Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as directed |
| 11 | M&L PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation sub base complete all as specified and as directed. |
| 12 | M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1: 6 complete all as specified and as directed. |
| 13 | M & L for rendering 10mm thick in cement mortor 1:4 on concrete or brick wall surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 14 | M&L for 100mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate), finishing cement concrete surface even and smooth without using extra cement and Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green etc complete all as specified and directed Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender