Tender For Repair And Renovation Of Birasal Airstrip In The District Of Dhenkanal For The Year 2026-27
Tender Value
2.90 Crore
Estimated cost
Bid Submission
03 Oct 2026
13 days left
EMD
2.90 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhenkanal → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Birasal Airstrip In The District Of Dhenkanal For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS:-Removing old lime or cement plaster from walls including rakingout joints 12 mm deep andremoving the debris within 50 m lead etc complete. as per direction of the Engineer-in-Charge. |
| 2 | Providing & laying Plain cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including lowering laying concrete in layers not exceeding 15cm thick to the required level ramming watering curing centering & shuttering etc. complete including cost conveyance royalty taxes of all materials and all labour T&P required for the work etc. complete as per direction of the Engineer-in-charge. |
| 3 | RCC work of M-20 in all floors having a minimum compressive strength ( in work test) 200 kg/cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 10mm size to 20mm size black hard crusher broken granite stone chips (10mm size 40% & 20mm size 60%) of approved quality & from approved quarry including hoisting lowering laying and compacting concrete with centering & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary and providing required No. of fan hooks as required including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS rod / Tor steel and binding wire and labour charges for bending binding and tying the grills etc. complete as per direction of the Engineer-in-charge.Drain Slab |
| 4 | Fly Ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with ordinary portland cement (OPC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. |
| 5 | Labour charges for straightening the coiled or bend up M.S. rod / HYSD bars confirming to Gr. Fe-500, cutting bending binding lapping placing welding etc. (Confirming to ISI specification) and jointing if necessary by lapping and tying the grills and placing in position as required for RCC work as per approved design hoisting lowering and laying in position including cost conveyance & taxes of M.S. rod / tor steel (Primary Producer like- SAIL/RINL/TATA/ JINDALSTEEL/ SHYAM STEEL) make) and binding wire of 18 to 20 gauge (as approved by the deptt.) weight of over lapping, couping, welded joints, spacer bar, chair, stage, hanger and binding wires shall not be considered for payment at all. Standard co-efficient of different size of the steel shall be considered. Welding & lapping should be confirming to relevant clause of IRC 1987 etc. complete as per direction of the Engineer-in-charge. |
| 6 | Providing 12mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 7 | Providing 16mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 8 | Supplying, fitting and fixing Vitrified Tile in floors, treads, steps and landing slabs of size 600mm x 600mm (Plain/Ivory) of approved make confirming to IS:13755 laid on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigments to match the shades of the tiles including, rubbing and polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete as per direction of the Engineer-in-charge. |
| 9 | Supplying fixing and fittings MS window grills, Doors, MS verandha grills and MS grill gate of approved design and drawing made out of MS flat and MS angle at work site with one coat of anticorrosive red oxide zink chrome primer including cutting holes in brick or RCC walls and fixing with CC (1:3:6) including cost conveyance royalty and taxes of all materials all labour T&P required for the work complete (payment will be made on weight basis only)(In all floors) etc. complete as per direction of the Engineer-in-charge. |
| 10 | Supplying, fitting and fixing of Gypsum ceilling with12mm thick Gypsum board main runner, cross tee, wall anglesuspended from ceilling including cost, conveyance, taxes of all materials, labour, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. |
| 11 | Distempering with two coats approved Distemper over a coat of primer of approved shade by means of brush to outside surface of walls in all floors with cost, carriage and all taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer - in - Charge.(a)Ground Floor |
| 12 | (b)First Floor |
| 13 | (c)Second Floor |
| 14 | Painting two coats with water proofing weather coat over a coat of primer of approved shade by means of brush to outside surface of walls in all floors with cost, carriage and all taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer - in - Charge.(a)Ground Floor |
| 15 | (b)First Floor |
| 16 | (c)Second Floor |
| 17 | Painting two coats with synthetic enamel paints of approved shade on Iron works including cleaning the surface with sand papering and using paints of approved quality and approved shade including cost conveyance taxes of all materials all labour T&P etc. complete as directed by the Engineer in charge.(a)Ground Floor |
| 18 | (b)First Floor |
| 19 | (c)Second Floor |
| 20 | Providing and laying 25mm thick grading Concrete of proportion (1:2:2 ) using 6mm size crusher broken black hard granite chips from approved quarry, scraping and cleaning the surface, fininishing smooth to proper slope and gradient including cost of all materials, cost of labour, conveyance, taxes, loading, unloading, curing,T&P, etc. all complete as per the direction of the Engineer-in-charge.(a)Ground Floor |
| 21 | (b)First Floor |
| 22 | (c)Second Floor |
| 23 | Fixing of wire netting or welded mesh including screw and nails Labour Cost |
| 24 | Birds net(welded mesh |
| 25 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned upto a lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm in thickness as per Clause 201 of MoRT&H Specifications for Road & Bridge works Latest Revision & including cost of all labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 26 | Dismanteling & removing cement concrete including stacking the useful materials for reuse and removing the debris with in 50. m Lead. etc complete. as per direction of the Engineer-in-Charge. |
| 27 | Construction of Un-reinforced,dowel jointed M-30 Grade cement concrete pavement by semi-mechanized method over a prepared sub-base with 43 grade cement @ 400 kg /cum coarse and fine aggregate confirming to IS:383,maximum size of coarse aggregate not exceeding 25 mm,mixed in a batching and mixing plant as per approved mix design,transported to site,laid with a fixed form or slip form paver,spread,compacted and finished in a continous operation including provision of contraction, expansion, construction & longitudinal joints, joint filler, separation membrance,sealant primer,joint sealant, debonding strip, dowel bar,tie rod admixtures as approved, curing compound, finishing to lines and grades as per drawing and as per clause 602 of MoSRT&H Specifications for Road & Bridge works (latest Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc. complete and as per direction of Engineer-in-charge. |
| 28 | Providing, Supplying, and applying of four component self-smoothing glossy finish 1mm thick trowel applied Epoxy-cycloaliphatic Amine resin flooring system like CIPOXY SL 1000 of Dr CIPY Polyurethane Make. Having a Green Pro Certification and the technical parameters of Compressive strength: > 38MPa as Per ASTM C 109; Tensile strength: ASTMD 638: > 6MPa; Elongation 5% as per ASTM D 638; Flexural strength: >9 MPa as per ASTM D 790; Abrasion resistance: < 60mg loss as per ASTMD 4060; Hardness, shore D > 65 with the average dry film thickness of about 1000 microns. This must be applied over screed of Cipoxy 17 at a thickness of 3mm and the technical Parameters are Compressive strength:> 35Mpa as per ASTM D 695 ; Tensile strength: > 9 Mpa as per ASTM D 638; Elongation: < 1.8 % as per ASTM D 638 ; Flexural strength: > 15Mpa as per ASTM D 790 and Pull off Adhesion: > 2 Mpa as per ASTM D 4541. This must be applied over an epoxy-based primer like CIPOXY 17/18 of Dr Cipy or Equivalent having pull off adhesion: > 2 MPa of thickness the manufacturer. All concrete has to be crack free surface of M20 or above grade with moisture barrier placed under the RCC surface. All construction joints need to be cut within 24 hours of Concrete placements. All expansion joints need to be sealed with Dr Fixit PU sealant or equivalent, as recommended by manufacturer. All the fixation in the surface has to be made prior to the application and treated. All the above process has to be undertaken by a manufacturer approved applicator. The surface has to be Clean, dry, and sound concrete must be surface prepared using Scarification & Grinding.The residual moisture should not be more than 4-5%. APPLICATION- Surface Preparation of Existing Concrete Floor by captive shot blasting, diamond grinding, or mechanical scarification to remove laitance, loose particles, dust, oil, grease, curing compounds, and other contaminants. The prepared surface shall achieve an open textured finish suitable for epoxy flooring application. All cracks, honeycombs, blowholes, and damaged areas shall be repaired with approved epoxy repair mortar. The surface shall be vacuum cleaned using an industrial vacuum cleaner to ensure a clean, dry, and dustfree substrate before primer. etc. complete as per Direction of E.I.C. |
| 29 | Dismantling brick or stone masonary in lime or cement mortar under 3m. height including stacking the useful materials for re-use and removing the debris within 50m lead etc complete. as per direction of the Engineer-in-Charge. (a)Ground Floor |
| 30 | Providing and laying P.C.C M-15 grade using 40mm down graded crusher broken stone aggregates as per approved drawing and technical specifications complete in all respect as per Section 900, 1000, 1500, 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (Latest Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. (a)Ground Floor |
| 31 | Labour for fencing birbed weir and post by means of staples and straining hooks by means of tying with G.I. wire and including cost of staples, hooks and tying wires etc. complete.as per direction of the Engineer-in-Charge. Labour Cost |
| 32 | Barbed Wire |
| 33 | Disposal of building rubbish / malba /rock/ similar unserviceable, dismantled or waste materials by mechanical means within 1km Lead away from the site, including loading, transporting, unloading to approved dumping ground or as approved /directed by Engineer-in-charge, including cost of equipments/ labour, conveyance, T&P and taxes etc. as per the direction of Engineer-in-charge. |
| 34 | Providing and applying tack coat with Medium setting bitumen emulsion on the prepared bituminous/ granular surface including cleaning with mechanical broom and spraying bitumen emulsion @ 0.20 Kg/ Sqm using mechanical means as per approved drawing and technical specifications complete in all respect as per Section 900, Clause 501.5.2 & 503 of MoRT&H Specifications for Road & Bridge works (Latest Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 35 | Providing and laying bituminous concrete using grading-II materials with minimum capacity of 60-90 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per approved drawing and technical specification complete in all respect as per clause 509 of MoRT&H Specifications for Road & Bridge works (latest Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc. complete and as per direction of Engineer-in-charge. |
| 36 | Providing road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads@250gms per sqm area , thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free from streaks and holes etc. for finished item of work as per approved drawing and technical specification complete in all respect as per Section 900 and Clause 803 of MoRT&H specification for road and bridge work (Latest Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 37 | Construction of embankment with approved materials obtained from borrow pits with all leads and lifts transporting to site,spreading, grading to required slope and compacting at OMC by Vibratory Roller to meet the requirement of Table-300.2 as per approved drawing and technical specifications complete in all respect as per Section 900 and Clause 305 of MoRT&H Specifications for Road & Bridge works (latest Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc. complete and as per direction of Engineer-in-charge. |
| 38 | Fine dressing and providing, laying turfing with live sods of perennial turf forming grass on embankment slope, verges or other locations including preparation of ground, fetching of sods with all lifts and leads upto 5 Km. and watering complete in all respect as per approved drawing and technical specifications as per Section 900 and Clause 307 of MoRT&H Specifications for Road & Bridge works (Latest Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 39 | Providing & laying sub-base with Moorum in layers not exceeding 225mm watering and compacting to the required density in O.M.C with Vibratory Roller including cost and conveyance of sub base materials as per Clause 408 & 901 of MoRT&H Specifications for Road & Bridge works (Latest Revision) & including cost of all materials, labour, T&P, royalty etc complete in all respect and as per direction of the Engineer-in-charge. |
| 40 | E.I. WORKS:-SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 41 | S/F of LED Bulb 9 watt |
| 42 | S/F of Street light- 90W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 43 | S/F of A.C Ceiling fan 48\\" size. (Make-Usha-Polycab Vital /crompton decora/ Crompton jura.) |
| 44 | S/F of step type Fan Regulator with all connection complete in all respect as per direction of Engineer in charge(Make-Roma/Legrand) |
| 45 | Supplying and installation of AC Point having 16-20A DP MCB, C series with enclosure, Schneider/Siemens/Legrand/ABB of suitable size as required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 1 year against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 46 | Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge. |
| 47 | Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. |
| 48 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years.To be used in corridor, rooms, toilet area |
| 49 | Supply of 35 3 ½ Core 1.1KV Grade ISI Marked Alluminium Armoured Cable (Make-Polycab/Gloster/Nicco) |
| 50 | Supply of 70 3 ½ Core 1.1KV Grade ISI Marked Alluminium Armoured Cable (Make-Polycab/Gloster/Nicco) |
| 51 | Supply of 10 2 Core 1.1KV Grade ISI Marked Alluminium Armoured Cable (Make-Polycab/Gloster/Nicco) |
| 52 | Supply & laying of 63 mm dia HDPE Pipe |
| 53 | LAYING OF CABLE:- Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 54 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 120 SQ. MM but not exceeding 400 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 55 | Supply,installation, testing and commissioning of Air Cooled HI Wall split type Air conditioners complete with Indoor unit (IDU), Out door unit (ODU), i/c R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cut off and50 hz ,1 phase AC Supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll /rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS694 or IS 9968 temperature sensing control IS/ International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per IS :1391 Part II 2023. The system shall be able to operate up to 50 Degree C (out door ambient temperature).The indoor outdoor must be Blue Fin coated. The unit price included with 3mtr Copper piping with insulation, drain Pipe and copper Power cable. The indoor should have 4 way swing . 5 Star Inverter Type - Cooling only (Category III Make :- Hitachi/ Toshiba/ Voltas)1.5 TR with 5 Star BEE Rating (Hitachi-RAS.V518PCDIBT1/ Toshiba-RAS-18G3KCV5SG/ Voltas-VOLTAS SAC 185INV VECTRA ELEGANT) |
| 56 | S/F of stand for outdoor unit of AC machine |
| 57 | Installation testing comissioning of AC Machine |
| 58 | S/F of Extra copper pipe |
| 59 | S/F of 15A Top |
| 60 | Unit Gas charging of 1.5ton S/T A.C machine with R22 gas. |
| 61 | Flushing & cooling coil and Condensor coil with Co2 Gas of S/T A.C machine |
| 62 | Leak testing, leak removing 1ton/ 1.5ton/ 2ton S/T A.C machine. |
| 63 | Unit Gas charging of 1.5ton/ 2ton of W/T A.C machine |
| 64 | panel reparing |
| 65 | SUPPLY OF PORTABLE AVIATION THRESHOLD LIGHT LOKOZO MODEL NO : AVX-REL-S-6W-R/G LUMINARIE : - Power : 6 Watts (3W for Each colour light)- LED Life Span : 50000 Hours- LED Make : OSRAM/BRIDGELUX/EQUIVALENT- LED Efficacy : 157 Lm/W- LED Color : RED and GREEN- Omni-Directional : Yes- Operating Mode : Steady- Operating Temperature : -10 °C To +55 °C- Operating Voltage : 12.8 V DC- Driver Integrated : Yes- Optical Material : PC - Housing : MS with Yellow Colour Powder Coating- Ingress Protection : IP66- The luminaires are designed for reliable operation in all weather conditions, including rain, dust, high humidity, and extreme temperatures, ensuring consistent performance and long service life.- Brand: LOKOZOBATTERY :- Rating : 12.8 V, 12 Ah - Type : LiFePo4 Battery - Back up : 22 Hours in Steady Mode - Charging Through : 230 V AC, 50 Hz - Battery Charging Indication : Yes- Battery Low Indication : Yes |
| 66 | S/F of 14.8 volt 12.5 AH battery for portable runway light |
| 67 | S/F of Base Plate as per requirement |
| 68 | S/F of Calibration of PAPI lights |
| 69 | Supply and fixing 50 watt LED Flood light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton) |
| 70 | Supply and fixing 250 watt LED Flood light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton) |
| 71 | Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface / recessed STEEL/PVC conduit as 2 x 2.5 sq.mm+1x1.5 sqmm |
| 72 | 2x4 sqmm+1x1.5sqmm |
| 73 | 2x6 sqmm+1x2.5sqmm |
| 74 | Supplying and fixing of 25mm HMS PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .Make-AKG/BEC/Precision/Norpak/Kinjal. |
| 75 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ABB ITUS as per direction of Engg.-in-Charge. 8 way DD |
| 76 | Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. |
| 77 | Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,230 volts,SP MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. |
| 78 | Supplying and fixing 6-32 Amps rating, 240V, C series,10KA breaking capacity, Double pole MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . |
| 79 | Supplying and fixing 63 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 1 years. |
| 80 | Supply, Installation, Testing and commissioning of 63A pannel(16/18 SWG Single Door panel board of size 24x18x10) 63A changover & copper busbar 35x5mm 1no, Micro LED phase indicator-3nos , in all respect as per direction of Engineer-in-charge.(Make-Legrand/Seimens/schneider/L & T) |
| 81 | Supply & laying 25 x 5mm copper strip on surface for connection etc. |
| 82 | Comprehensive Annual Maintenance (One Year) of CCTV SystemSupply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR Fixed Lens Dome/Bullet Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 50m(bullet)/40m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 - 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.8mm(Dome)/3.6mm(bullet), Field of View FoV H:96.5°, V:73.8°(dome)/ Field of View FoV H:94.1°, V:71°(bullet), BLC, HLC, WDR, 2D/3DNR, White Balance - Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : -30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. Make-Honeywell Value series/Pelco/Axis/Bosch |
| 83 | Supplying and fixing of following sizes of heavy class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Eng.-in-Charge. Make- Akg/ Bec/ Precision/ Norpack 20 MM |
| 84 | 25 MM |
| 85 | SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance < 9.38 /100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax/ Legrand/ Panduit |
| 86 | Supply installation testing and commissioning of 8x10/100/1000 Ethernet L2 Fully Managed Switch, 8 GE TX, ports, 2 GE SFPports, 1 console port, 20Gbps Backplane, Full wire-speed filtering and forwarding, Store forwarding, 8K MAC Table, Backpressure is adopted for half-duplex, while IEEE802.3x is adopted for full-duplex, Broadcast and multicast storm control, IGMP snooping v1/2/3, 802.1p, 8 priority values, 4 priority queues, 8 interfaces can be bound in a group through dynamic LACP or static aggregation, and 8 groups can be supported simultaneously, IEEE 802.1D-1998 STP, path backup, IEEE 802.1w (RST) and IEEE 802.1s (MSTP), Port-based VLAN, 802.1Q VLAN, QinQ and GVRP, 4K VLANs table, IP routing S2528C/S2528GX/S2552 support static route, Management CLI, Telnet, SNMP and RMON, IEEE 802.1x, port-based access control, RADIUS, TACACS, Supporting DHCP snooping on the hardware, Supporting DAI and static/dynamic ARP prevention on the hardware, Supporting IP ACL, MAC ACL and VLAN ACL on hardware Power indicator, system indicator, connection/data forwarding indicator, 10/100M indicator, Working temperature 0-50 with Bid Specific OEM Authorization Certificate. (Brand- Cisco/ Allied Telesis/ Techroutes/Equi)) |
| 87 | Repairing/Replacement, Servicing & Cleaning of Cameras, NVR, Racks,patch panel, router, server, firewall,non-PoE switch, PoE switch,amplifiers,data networking system, Telephones, EPBAX system alongwith 3 mtr automatic boom barrier etc. as per direction of engg-in-charge.(For one year) |
| 88 | Supply of 2 nos Skilled Technician (ITI/Diploma in Computer science/IT) for day to day Maintainance of above ELV system such as CCTVs, EPBAX/IP-PBX , Automatic boom barrier etc. 6 am to 2 pm .(@20,766.00/technician) |
| 89 | P.H. WORKS:-Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liter's along with 2 noa of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in chargeAqua guard pure Chill 80 Ltr PSS UV |
| 90 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge Ground Floor 25mm dia C - PVC pipe |
| 91 | 32mm dia C - PVC pipe |
| 92 | First Floor40mm dia C - PVC pipe |
| 93 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.JAQUAR/HINDWARE/CERA OR EQUIVALENT15mm dia CP angle stop cock(FLR-ACR-5053N) |
| 94 | 15mm dia CP two way bib cock(FLR-CHR-5041N) |
| 95 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 96 | 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) |
| 97 | 25mm dia brass full way valve (Shakti make) |
| 98 | 32mm dia brass full way valve (Shakti make) |
| 99 | 40mm dia brass full way valve (Shakti make) |
| 100 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 101 | 15mm CP Extension piece |
| 102 | 125mm CP grating |
| 103 | 15mm size C.P. flange |
| 104 | Pressmatic Urinal Valve PRS-CHR-077 Jaquar make |
| 105 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width Fly ash Bricks in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 1000 liters capacity PVC water storage tank roof of 1st floor |
| 106 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.Ground Floor |
| 107 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-chargeGround Floor |
| 108 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.Ground Floor |
| 109 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Supreme /Ashirvad) |
| 110 | 110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 111 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 112 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 113 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 114 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 115 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 116 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 117 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 118 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 119 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 120 | Supplying all materials,labour,T&P and fixing Flat back lipped wall urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in chargeFlat Back Large Urinal (Hindware 60002) |
| 121 | 15mm dia urinal spreader |
| 122 | 32mm CP doom waste |
| 123 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargeEuropean water closet with P trap plain |
| 124 | 10 litres capacity PVC LL cistern (Slimline-Deluxe-colour-Parryware make) |
| 125 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge625mmx400mm size wash hand basin |
| 126 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail |
| 127 | Towel ring |
| 128 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror (swivelled type) |
| 129 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP Soap dish Holder (ACN-CHR-1131N) |
| 130 | Supplying all materials,labour,T&P and fixing Standing urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge. |
| 131 | Construction of 1no. production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessoriesLabour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore onlyDrilling of 200mm dia bore00 mtr to 30mtr |
| 132 | 30 mtr to 45mtr |
| 133 | 45 mtr to 205.00mtr |
| 134 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.Lowering of 200mm dia P.V.C casing pipes00 mtr to 30 mtrs |
| 135 | 30 mtr to 60mtr |
| 136 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.200mm dia PVC (sch-80) pipe |
| 137 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) |
| 138 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in chargeBy DTH Rig |
| 139 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:Rocky terrain with boulder formation for 300m depth |
| 140 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)2HP single phase 3 stage vertical / horizontal submersible pump set at head range 20 to 35 meters discharge 145 to 110 LPM with outlet dia of 25mm |
| 141 | DOL Control panel |
| 142 | 40mm dia steel short piece |
| 143 | Well cap |
| 144 | 50mm size CI bracket |
| 145 | 2.50sqmm flat cable |
| 146 | 20mm dia rigid UPVC pipes |
| 147 | Steel rope with cover |
| 148 | Labour charges for lowering including transportation |
| 149 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge32mm HDPE pipes (Finolex/Supreme make) |
| 150 | Construction of Production well Protection Chamber Supplying all materials, labour, T & P and constructing Bore well protection chamber of the inside size 650x650x1000 hight with earthwork in excavation in all kind of soil, cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g. chips, 12mm thick cement plaster (1:4) inside and outside, RCC cover slab in (1:1.5:3) using 12 mm size h.g. chips, and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction pof the engineer in charge. |
| 151 | Ext. S/D PortionSupplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge100mm dia P.V.C. pipe |
| 152 | 150mm dia P.V.C. pipe |
| 153 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m |
| 154 | 450x450mm Square Man Hole Cover -50.0 kg |
| 155 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender