Tender For Construction Of Ri Office Cum Residence Building At Mitrapur For The Year 2026 27
Tender Value
58.64 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
6 days left
EMD
58647
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baleshwar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Ri Office Cum Residence Building At Mitrapur For The Year 2026 27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of fondation in hard soil within the initial lead & lift including dressing & levelling the bed & depositiong the excavated earth away from the site etc. all complete as per the direction of Engineer in Charge. |
| 2 | Supplying and filling approved sand as per IS : 383 including cost of sand, transportation to site, spreading, watering, ramming and compacting in layers of 15 cm loose thickness to 95 % relative density as per IS 2702 part (XIV) including preparation of sub grade, dressing to the required slope with all leads and lift etc. as per drawing , specification and direction of site Engineer. |
| 3 | Providing cast in situ reinforced cement concrete bored double under reamed pile of M-25 grade 300mm. dia bore with single under reamed of 2.5 times the bore dia design to carry the design safe load using bentonite & casing & treaming of pile & driving the cage up to required depth with supply of all labours tool & plants etc. |
| 4 | Providing and laying plain cement concrete 1: 3 : 6 ( 1 part cement : 3 parts coarse sand : 6 parts of graded stone aggregate 40 mm max. size ) in foundation, footing for columns, floor ( sub base ), including form work, mixing, placing, compacting, curing etc. all complete as per specification and directed by the Engineer. |
| 5 | Providing C.C. M-20 using 20mm & down graded size h.g. chips of approved quality including hoisting laying concrete with rigid smooth centering / shuttering, necessary scaffolding, cost & conveyance of materials, labour, T&P royalty, taxes, curing but excluding cost of reinforcement etc. complete as per direction of the Engineer-in-charge. |
| 6 | Providing R.C.C. M-30 using 20mm & down graded size h.g. chips of approved quality including hoisting laying concrete with rigid smooth centering / shuttering, necessary scaffolding, cost & conveyance of materials, labour, T&P royalty, taxes, curing but excluding cost of reinforcement etc. complete as per direction of the Engineer-in-charge.(A)In Plinth Beam/GB/ Pile CapIn Ground Floor |
| 7 | (B)Column, Roof Beam In Ground Floor |
| 8 | In First Floor |
| 9 | In Second Floor |
| 10 | (C)Window SillIn Ground Floor |
| 11 | In First Floor |
| 12 | In Second Floor(D)Staircase In Ground Floor |
| 13 | In First Floor |
| 14 | In Second Floor(E)LintelIn Ground Floor |
| 15 | In First Floor |
| 16 | In Second Floor (F)Chajja In Ground Floor |
| 17 | In First Floor |
| 18 | In Second Floor (G)Roof Slab In Ground Floor |
| 19 | In First Floor |
| 20 | In Second Floor |
| 21 | Supplying and placing in position High yield deformed bars reinforcement Cold Twisted deformed bars reinforcement for RCC work including the cost of steel straightening cleaning decoiling cutting bending to requiredshapes and lengths as per details binding with contractors own 16 SWG black soft annealed binding wire at every intersection In Ground Floor |
| 22 | In First Floor |
| 23 | In Second Floor |
| 24 | Providing 2.5cm thick Damp proof course with c.c (1:2:4 ) using 12mm size CBHG Chips including cost cost conveyance, royalty,taxes, labour,T&P required for the work watering & curing for specified period complete as per direction of the Engineer-in-charge. In Ground Floor |
| 25 | Providing and laying Fly ash brick masonry work in cement mortar 1 : 6( 1 cement :6 coarse sand ) as per specifications in one or more brick thickness and in any shape including providing recesses, opening, scaffolding,staging, curing, finishing the joints flush below ground level and raking out joints in and above plinth level . In sub structure Ground floor |
| 26 | In superstructure In Ground Floor |
| 27 | In First Floor |
| 28 | In Second Floor |
| 29 | Providing and laying Fly ash brick masonry work in cement mortar 1 : 4( 1 cement :4 coarse sand ) as per specifications in one or more brick thickness and in any shape including providing recesses, opening, scaffolding,staging, curing, finishing the joints flush below ground level and raking out joints in and above plinth level In superstructure Ground Floor |
| 30 | In superstructure Ground floor |
| 31 | In First Floor |
| 32 | Filling foundation and plinth with excavated materials well watered and rammed etc.complete as per direction of the Engineer-in-Charge Ground floor |
| 33 | Providing 12mm thick cement plaster (1:4) over brick work including cement punning for skirting. on exposed brick masonry or concrete surface, including provision of groove wherever necessary, curing and cost of scaffolding, leveling in prefect vertical plane, complete in all respect as directed by site engineer. In Ground Floor |
| 34 | Providing 12 mm. thick cement plaster in mortar 1: 6 ( 1 cement :6 coarse sand ) on exposed brick masonry or concrete surface, including provision of groove wherever necessary, curing and cost of scaffolding, leveling in prefect vertical plane, complete in all respect as directed by site engineer. In Ground Floor |
| 35 | In First Floor |
| 36 | In Second Floor |
| 37 | Providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment necessary, curing and cost of scaffolding,leveling in prefect vertical plane,complete. In Ground Floor |
| 38 | In First Floor |
| 39 | In Second Floor |
| 40 | Providing 16mm. thick cement plaster in mortar 1: 6 ( 1 cement :6 coarse sand ) on exposed brick masonry or concrete surface, including provision of groove wherever necessary, curing and cost of scaffolding, leveling in prefect vertical plane, complete in all respect as directed by site engineer.Ground floor |
| 41 | In First Floor |
| 42 | In Second Floor |
| 43 | Supplying, fitting & fixing Dressed Seasoned Salwood work Framed fixed in choukhats for doors , windows and Ventilators including all comp. Ground floor |
| 44 | In First Floor |
| 45 | In Second Floor |
| 46 | Supplying, fitting & fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fitting and fitting anf ixtures etc. complete ref. A/R-2022-p-234 item-9 Ground floor |
| 47 | In First Floor |
| 48 | In Second Floor |
| 49 | Supplying, fitting & Fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame shutters and all fiting and fixtures. Ground floor |
| 50 | In First Floor |
| 51 | Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C Ground floor |
| 52 | In First Floor |
| 53 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. Ground floor |
| 54 | In First Floor |
| 55 | Providing and Painting wall Surface one coat with wall Primer to give an even shed before applying paint to walls including cost of Primer , labour, T&P all comp. including cost colour, paint etc.of all materials,labour, T&p required for the work complete. Ground floor |
| 56 | In First Floor |
| 57 | In Second Floor |
| 58 | Wall painting two coats with any approved quality made by Dulux/Asian/Nerolac/Berger of Weather shield coat over a coat of priming on new work to give an even shade including cost colour, paint etc.of all materials,labour, T&p required for the work complete. Ground floor |
| 59 | In First Floor |
| 60 | In Second Floor |
| 61 | Finishing wall surface of wall with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials ,taxes,labour,T&P etc. completeas per direction of EIC. Ground floor |
| 62 | In First Floor |
| 63 | In Second Floor |
| 64 | Providing two coats of plastic emulsion paint of approved shade on new work to give an even shade including necessary preparation of surface, cost & conveyance of materials, labour, T&P etc. complete to shape as per direction of the Engineer-in-charge. Ground floor |
| 65 | In First Floor |
| 66 | In Second Floor |
| 67 | Supplying,fitting and fixing of M.S. iron grill /gate made out of structure steel angle,sheet flat/square bar etc. for grills of approved design icluding all cost conveyance taxes etc. complete.Ground floor |
| 68 | In First Floor |
| 69 | Providing & laying two coats of synthetic enamel paint on new steel surface over a coat of red-oxide of approved shade after necessary preparation of surface by spra painting in all floors of conveyance of all complete including supply of all labour, materials, T & P, taxes, etc. complete . Ground floor |
| 70 | In First Floor |
| 71 | Providing, Fitting and Fixing of VITRIFIED TILES in Floor over 25mm thick Cement mortar ( 1:1) including cost of Labour, materials all comp. etc.complete as per direction of the Engineer-in-charge. Ground floor |
| 72 | In First Floor |
| 73 | Providing & fixing Ceramic Glazed tiles confirming to IS 13753 in wall, dado,skirting,rises of steps over 12mm thick bed of cement mortar 1:3 (1cement : 3sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cost & conveyance of materials,royaliy labour, T &P etc. complete as per direction of the Engineer-in-charge. Ground floor |
| 74 | In First Floor |
| 75 | Providing, Fitting and Fixing of CERAMIC FLOOR TILES in Floor over 25mm thick Cement mortar ( 1:1) including cost of Labour, materials all comp. etc.complete as per direction of the Engineer-in-charge. Ground floor |
| 76 | In First Floor |
| 77 | Providing, Fitting and Fixing of INDUSTRIAL VITRIFIED TILES in Floor over 25mm thick Cement mortar ( 1:1) including cost of Labour, materials all comp.etc.complete as per direction of the Engineer-in-charge. Ground floor |
| 78 | In First Floor |
| 79 | Providing, Fitting and Fixing of GRANITE in Floor over 25mm thick Cement mortar ( 1:1) including cost of Labour, materials all comp. etc.complete as per direction of the Engineer-in-charge. Ground floor |
| 80 | In First Floor |
| 81 | Providing & fixing Chequered tiles of approved thickness (300mmx300mm) size in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cost of all materials labour, T&P etc.complete as per direction of the Engineer-in-charge.Ground floor |
| 82 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing in all floors using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. Ground floor |
| 83 | In First Floor |
| 84 | Providing and injecting chemical emulsion for PRE_CONSTUCTIONAL anti-termite treatment and creating achemical barrier with a interval of 2'-0\\" / 2'-0\\" square on points under and around the column pits, well treanches .basement excavation, top surface of plinth filling, junction of wall andfloor, along the external perimeter of building, expansion joints, surrounding of pipes and conduits etc.complete(plinh area of the building at ground floor only shall be measured)as per drawing, dsign and direction etc. complete Ground floor |
| 85 | ELECTRICAL Wiring Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire: Finolex/ L&T / Anchor / Havels /HPL / V Guard/KEI/ Greatwhite/Polycab) (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) -do- Group A |
| 86 | -do- Group B |
| 87 | -do- Group C |
| 88 | Recessed wiring to Fan Point in... -do- Group B |
| 89 | Recessed wiring to Call Bell Point in-do- Group C |
| 90 | Recessed wiring to Exhaust Fan Point in-do- Group C |
| 91 | S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 92 | S/F of Angle holder replacing Ceilling Rose (Make : Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 93 | Swich BoardsS/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 94 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 95 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 96 | S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 97 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 98 | S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection. (Make : Anchor / Cona/ Greatwhite/ Havells/ Legrand/ L&T) |
| 99 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover |
| 100 | 4 Modular box with base & cover |
| 101 | 6 Modular box with base & cover |
| 102 | 8 Modular box with base & cover |
| 103 | 12 Modular box with base & cover |
| 104 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire: Finolex/ L&T / Anchor / Havels /HPL / V Guard/ KEI/ Greatwhite/ Polycab) 2x1.5+1x1.5 (1.8.1) |
| 105 | 2x2.5+1x1.5 (1.8.2) |
| 106 | 2x4+1x1.5 (1.8.3) |
| 107 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 108 | Circuit Breakers S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) (Make : Anchor / Cona/ Greatwhite/ Havells/ Legrand/ L&T) |
| 109 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of MCB 4 way Double Door (2.3.5 ) |
| 110 | S/F of MCB 8 way Double door (2.3.6) |
| 111 | S/F of MCB 12 way Double door (2.3.7) |
| 112 | Main switches Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 113 | Earthing S/F of G.I.Earth Plate Earthing 600 mm x600mmx6mm with Salt & Charcoal for Earth electrode (3:4)+(3.6) |
| 114 | S/L of 25mm x 6mm G.I. earth strip in ground(3:10) |
| 115 | Fittings Supply and fixing of 225mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delux R/ Orient-Power Flow DBB/ Pollycab -Fresh on DBB ) |
| 116 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 117 | S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections ( Make- Crompton/ HPL/ Polycab/ Havells/ / Panasonic/ RR/Crompton ) |
| 118 | Supply and fixing of 1200mm A.C. Ceiling fan (1 star) with all accessories and connections with out fan regulator (Make:Usha-Striker neo HS/Crompton- HS/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White - Aldous/ Pollycab - Vital HS ) |
| 119 | S/F step type modular fan regulator |
| 120 | Supply and fixing of 45-48 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections (Make- Crompton/ Phillips/ HPL/ Polycab/ Havells/ Panasonic/ RR/ Orient ) |
| 121 | Supply and fixing of 60 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections (Make- Crompton/ Phillips/ HPL/ Polycab/ Havells/ Panasonic/ RR/ Orient ) |
| 122 | S/F of 15w Watt LED Bulb (Make- Crompton/ Phillips/ Havells/ Panasonic) |
| 123 | S/F of 2250 VA/24V Inverter with 2 nos. 180Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous) |
| 124 | S/F of 12W LeD Squre (10\\"×10\\") LSDSMN-12W-WW with surface Panel rings (Havels/crompton/philips/panasonic) |
| 125 | Area lightings Supply of 6 mtr long hot dip galvanized Octagonal pole having base dia of 155 mm and top dia of 70 mm and plate thick ness of 4 mm or more complete with base plate 250x250x16mm and 4 nos. Jtype En 8 grade foundation bolts M24X750mm to withstand 180 KM / HR wind speed considering the weight & dimension of One no. Solar lights fixed on the top of the bracket . The Pole must be suiable to withstand 180 KM/Hr wind speed by considering the weight and wind expose area of one no Semi Integrated Solar lights at a height of 6 mtr above ground .Both the Octagonal Pole and EN8 grade fdn bolts must be manufactuered by Octagonal pole manufacturing company. Brackets & EN8 fdn bolts manufactured in third party Supplier/manufacturer shall not be acceptable. (Make : - Utkarsh/RR Ispat/Vakrangee) |
| 126 | Supply of 40 W Semi Integrated type Solar street lights having 100 Wp or more highly efficient Monocrystalline PV module & 12.8 V 42 Ah or more ) Lithium Ferrophosphate (LiFePo4) Battery having BIS ) which shall be inside the die cast alluminium housing luminaire housing (Theft retardant type), MPPT charge controller having > 92% efficiency & PIR Sensor. The initial lumen output of AIO street light shall be >6400 lumen or more in CCT 6000K (+/-500K) , Lumen efficacy > 160 lm/w as per LM 79 report of NABL Lab. The LED chip will be of OSRAM/NISCHIA/CREE/SEOUL Semiconductor only and should be with lenses for effective lighting distribution. The complete system & BMS should be designed to provide 2 days (24Hrs) back up in dimming mode by activating PIR sensor and battery should be kept inside the luminaire and Mono Crystalline Panel (Made in India ) , Multi purpose SA bracket to mounted on the ARM in south direction. The luminaire must be having I die cast alluminium housing street light with IP 66 protection for critical component like (LED compartment, Driver compartment & Battery) & IK 08 . The solar street lighting company has to supply Solar Panel , Solar light , battery , PIR sensor , Multipurpose SA bracket & other accessories with provision to fix the solar panel towards south direction for faster charging of battery. The Solar street light and the multipurpose Arm shall be fixed in Pole. The solar street lighting company has to offer Warranty on complete lighting system for a period of 5 years. The solar lighting company must submit the warranty certificate in the department by mentioning 5 years warranty on complete lighting system I.e, Light, Charge controller, Battery, Solar Panel, Module Mounting structure, Multipurpose Single Arm bracket etc against manufacturing defects .The Necessary after sales service to against manufacturing defects to be provided Solar lighting company through their Toll free base service service set up within 100 to 150 KM from the project site. 1. LM 79 REPORT NABL lab ) , 2. IK 08 (Report of NABL lab ), 3. IP 66 Report of NABL lab (Make: Panasonic/Havells/Crompton/Philips/Wipro) |
| 127 | PH Earth work in all kinds of soil in excavation of foundation trenches within 50 m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding o.30 in depth and as per direction of E.I.C .-- Initial lift up to 1.50m |
| 128 | 2nd depth upt 3.00 mtr |
| 129 | Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per direction of E.I.C. |
| 130 | Supplying all materials, labour T&P and providing c.c (1:3:6) using 4cm h.g. metal including watering, curing, coveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 131 | Supplying all materials, labour T&P and providing c.c (1:1.5:3) using 12 mm h.g. chips including watering, curing, coveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 132 | 1st floor |
| 133 | Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks 25cmx12cmx8cm size having cs. not less than 75kg / cm2 with dimensional tolerance ± 8% in including watering,curing conveyance of all materials to worksite, payment of royalty taxes etc. all complete as per specification and direction of EIC. - In Foundation & Plinth in CM (1:4) |
| 134 | Supplying all materials, labour, T &P and providing C.C (1:1.5 :3 ) using 12mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to worksite, curing, conveyance of all materials to worksite, payment of royalty, taxes etc, all complete as per specification and direction of E.I.C. |
| 135 | Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite etc. complete as per directio n of E.I.C. |
| 136 | Supplying all materials, labour, T&P and providing rigid & smooth centering & shuttering for R.C.C.works including false work and dismantling them after casting including conveyance of all material, to worksite, payment of royalty, taxes etc. all complete as per direction of E..I.C.-- R.C.C.Slab |
| 137 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.-- 12mm thick C.P with C.M. (1:4) |
| 138 | 20mm thick C.P with C.M. (1:4) |
| 139 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 140 | Supplying all materials, labour, T&P and providing cement flush pointing to brick masonary (1:3) including watering, curing conveyance of all materials to work site, payment of royality, taxes etc. all complete as per direction of E.I.C. |
| 141 | Supplying all labour, materials T&P and fixing of R.C.C. Baffle wall pre-cast with C.C. (1:1.5:3) using 12 mm b.h.g. chips and fitted to septic tank as per P.H. Specification and direction of E.I.C. |
| 142 | Supply all materials ,labour,T&P providing fitting and fixing PVC. Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size h.g. chips all complete including watering curring,conveyance of all \\"materials to work site .payment of royality .taxes its all complete as per specification and direction of E.I.C.-11OmmXI 10mm X110mm PVC Tee |
| 143 | Supplying all materials labour T& P and providing 500 x 500 x 100mm thick RCC precast M.H cover in C.C (1:1.5:3) using 12mm h.g. chips and placing the cover on the MH/S tank & finishing smooth all complete as per specification and direction of E.I.C |
| 144 | Supplying all materials, labour, T&P and making M.S. Step Iron in 12mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C. |
| 145 | Filling F&P with excavated materials, including watering and ramming as per direction of E.I.C. |
| 146 | Supplying all materials, labour T&P and fixing Ceramic Tiles in floors on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per specification and direction of EIC- Ground Floor |
| 147 | First floor |
| 148 | Supplying all materials, labour T&P and fixing Granite Tiles on Kitchen slab on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per specification and direction of EIC- First Floor |
| 149 | Supplying all materials, labour T&P and fixing porcelain glazed tiles in dados skirting, on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of Engineer-in-Charge.[Gr. Floor] |
| 150 | First floor |
| 151 | Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C |
| 152 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 153 | Supplying all materials, labour T&P and fixing Water closet, (Orissa pattern squating pan) duly embeded in C.C. (1:5:10) using 4cm h.g. metal all complete as per direction of E.I.C.- 580mm Orissa pan (Cerra/Parry ware/ Hindware) |
| 154 | Supplying all materials labour T&P and fixing Wash Down Water Closet European type W.C. pan with Integral S or P trap to the floor with wooden plug and C.P screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.C- E.W.C. with S trap Plain(Cerra/ Parry ware/ Hindware) |
| 155 | Supplying all materials labour T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Cerra/Parry ware/ Hindware) |
| 156 | Supplying all materials labour T&P and fitting & fixing SWR ventilating pipes and fittings of the following O.D including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e.w. in excavation in all kinds of soil and refilling of trenches as per direction of E.I.C.- 110 mm dia PVCSWR Pipes |
| 157 | 110 mm dia PVC SWR P Trap |
| 158 | 110 mm dia PVC SWR Door Tee |
| 159 | 110 mm dia PVC SWR Door Bend |
| 160 | 110 mm dia PVC SWR Plain Bend |
| 161 | 110 mm dia PVC SWR Plain Tee |
| 162 | 110 mm dia PVC SWR Offset |
| 163 | 110 mm dia PVC SWR Cowl |
| 164 | 125 mm dia C.P.grating |
| 165 | 75 mm dia SWR Pipes |
| 166 | 75 mm dia PVC SWR Plain bend |
| 167 | 75 mm dia PVC SWR Door bend |
| 168 | 75 mm dia PVC SWR Door Tee |
| 169 | 110 mm dia PVC SWR Nahani trap without Jally |
| 170 | 100x75 mm dia PVC R/S |
| 171 | Supplying all materials, labour T&P and cutting holes through brick/stone masonary walls for taking PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of E.I.C. - 250 mm to 375mm thick wall |
| 172 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.-- 550mm x 400mm WHB with all Fittings with C.P. Waste, PVC Waste Pipe & Connection Pipe. (Cera/ Parry ware/ Hindware) |
| 173 | Supplying all materials, labour T&P and fixing padestrial for wash basin complete recessed at the back for the reception of pipe and fitting etc. all complete as per specification and direction of E.I.C. (Parrywear/Cera/Hindware) |
| 174 | Supplying all materials, labour T&P and fixing mirror of superior glass mounted on 6mm thick plywood sheet and fixed to wooden plugs with C.P screws and washers complete as per P.H specification and direction of E.I.C.-- 600mm x 450mm B.E. Mirror (fixed type) |
| 175 | Supplying all materials, labour T&P and fixing standard size C.P. towel rail / ring complete with c.p. brass brackets fixed to wooden plugs with c.p screws as per P.H specification and direction of E.I.C. -- 20 mm x 600 mm long C.P Towel rail |
| 176 | C.P. Towel Ring (St.) |
| 177 | Supplying all materials, labour T&P and fixing standard size C.P. soap holder complete with c.p brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of E.I.C C.P.Soap Holder. |
| 178 | Supplying all , labour T&P and fitting, fixing of standard size Glass shelf with CP brass bracket and guard rails complete fixed to wooden plugs with CP screw as per specification and direction of E.I.C -- 450x125mm size Plate Acrylic Shelf |
| 179 | Supplying all labour, T&P, materials & fixing wash Kitchen sink with M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C. -- 600mm x 450mm x 200mm Stainless Steel sink.[Including C.P. Waste & PVC Waste Pipe] |
| 180 | Supplying all materials, labour T&P and fixing bowl Pattern urinal (Standing Urinal)including the connecting the urinal with waste pipe by means of white lead list with chopped hemp etc. all complete as per direction of E.I.C.-Bowl Pattern Urinal (Standing Urinal) including 32mm dia PVC Waste Pipe with brass coupling nut & 15mm dia PVC inlet connection Pipe [CerraParrywear/Hindware] |
| 181 | Supplying all materials, labour T&P and costructing gully trap chamber of the following inside size with 8cm thick R.C.C. precast cover slab in c.c. (1:1 1.5:3) using 12 mm size h.g. chips foundation concrete (1:3:6) using 40 mm size h.g. metal on bed and arround trap Fly Ash brick work in c.m. (1:6) in F&P and inside 12mm thick c.p (1:3) finished with a floating coat of neat cement including fixing 100mm size H.C.I gully trap and grating etc. all complete as per approved drawing, specification and direction of E.I.C. Inside size 250mm x 250mm gully trap Chamber |
| 182 | Supplying all materials, labour T&P and constructing Inspection chamber of the following sizes with c.c (1:3:6) using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in c.m (1:6), moulding and shaping the channel inside and benching with c.c. (1:11/2:3) using 12mm size h.g. chips 12mm thick c.p. (1:3) with punning to inside cement flush pointing (1:3) to outside R.C.C. cover slab in c.c. (1:11/2:3) using 12 mm size h.g. chips with R.C.C. m.h. cover, e.w. in excavation in all kinds of soil and refilling the cavity arround the chamber including watering, curing, conveyance of all materials to site payment of royalty, taxes etc. all complete as per approved specification and direction of the E.I.C. Inside size 760mm x 760mm x 460mm I.C. |
| 183 | Supplying all materials, labour T&P and constructing Man hole chamber of the following sizes with c.c. ( 1:3:6) using 40 mm size h.g. metal on bed Ist class Fly Ash brick work in c.m. (1:6) moulding and shaping the channel inside and benching with c.c (1:11/2:3) using 12mm size h.g. chips, 12 mm thick c.p (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C. cover slab in c.c (1:11/23) using 12 mm size h.g. chips with R.C.C m.h. cover, e.w in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty, taxes etc. all complete as per approved specification and direction of the E.I.C.-- Inside size 910mm x 910 mm x 750 mm |
| 184 | Supplying all materials, labour, T&P and laying 110 mm dia SWR pipes of the following O.D conforming to IS No. 13592 and aligning to requisite gradient inside the trench encasing all round of the pipe with c.c (1:3:6) using 4 CM size h.g. metal and CC(1:3:6) with 4CM size h.g. metal in the bed of the trench including lowering the pipes to the bed of the trench, earth excavation in trenches in all kinds of soil, refilling the same in layer of 0.3 mtrs with watering and ramming, removing of surplus earth, testing of sewerage line including use of T&P as per PH Specification and direction of E.I.C.- 110 mm dia SWR Pipe Sewerage line with all round encasing (conforming to IS No. 13592) |
| 185 | Supplying all materials, labour T&P and constructing soak way pit of the following sizes with dry brick walling form bottom up to invert of inlet pipe and 1st class Fly Ash brickwork in c.m(1:6) for the remaining height at top, 12 mm thick c.p(1:4) inside and outside over masonary brickwork gravel packing in the rear of well steining R.C.C. cover slab in c.c (1:11/2:3) using 12mm size h.g. chips fitted with iron lifting handles including e.w. in open well excavation in stoney earth and refilling the cavity around the pit & painting the iron works, watering , curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of E.I.C.- 1.20mtrs.dia x 2.0mtr.deep soak way pit |
| 186 | Supplying all materials, labour, T&P and constructing soak way pit of the following sizes with precast R.C.C rings joined loose gravel backing in the rear of well steining, precast R.C.C cover slab in c.c.(1:1.5:3) using 12mm size h.g. chips fitted with iron lifting handles including e.w. in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron works, watering ,curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per approved drawing, specification and direction of E.I.C.- 1.20 mtr dia x 2.00 mtr. deep RCC Ring Pit |
| 187 | Supplying all materials, labour, T&P and fixing rotational moulded polyethylene cylindrical vertical waterstorage tank confirming to IS 12701- 1996 including cutting hole through the tank and fixing MS tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting the tank and placing the tank to the required position including all complete as per specification and direction of EIC.(including cost of FG Over Head Tank) -- 1000 Ltrs. Capacity F.G.Over Head Tank. (on roof of 1st floor) |
| 188 | Supplying all materials, labour, T&P and Construction of masonary stagging with providing 1st class Fly Ash brick work in c.m, (1:6) of 0.46m. height in staging and in circular protection wall to support the tank in roof of ground floor using 25cm x 12cm x 8cm size Fly Ash bricks having crushing strength not less than 75 kg/cm2 12mm thick c.p.(1:4) over brick work, R.C.C. Slab of size 1.60mtr xl.60mtr x0.l0mtr thick, R.C.C. beam of size 0.25m x 0.30m and 2.60m average length in c.c.(1:1.5:3) using 12mm size h.g. chips including centering and shuttering, watering, curing conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C -- For 1000 Ltr. Capacity Over Head Tank(on roof of 1st floor) |
| 189 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C - 20 mm dia PVC (ASTM) Pipe [Internal] |
| 190 | 25 mm dia PVC (ASTM) Pipe [Internal] |
| 191 | 25 mm dia PVC (ASTM) Pipe) [External] |
| 192 | 32 mm dia PVC (ASTM) Pipe) [External] |
| 193 | 32 mm dia HDPE Pipe [External Including E/W] |
| 194 | 32 mm dia HDPE Pipe [Inside Tube Well] |
| 195 | Supplying all materials,labourT&P and cutting holes through brick/stone masonary walls for taking water supply pipes and fittings including making good the damages etc.all complete as per P.H specification and direction of Engineer in charge |
| 196 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. . |
| 197 | Supplying ail materials,labour,T&P and fitting & fixing brass/C.P fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H specification and direction of E.I.C.- 15mm dia. C.P Bibcock (Short body) [Jaquar] |
| 198 | 15mm dia. C.P Bibcock (long body) [Jaquar] |
| 199 | 20mm dia.C.P Conceal stopcock [Jaquar] |
| 200 | 15mm dia.C.P Angle stopcock [Jaquar] |
| 201 | 15mm dia C.P Pillar cock [Jaquar] |
| 202 | 15mm CP Two Way Bib cock[Jaquar] |
| 203 | 15mm dia C.P. Health Faucet [Jaquar] |
| 204 | 15mm dia C.P Extension piece. |
| 205 | 25mm dia. PVC Ball valve [Metal Ball] |
| 206 | 32mm dia. PVC Ball valve [Metal Ball] |
| 207 | Supplying all materials, labour, T&P and fitting and fixing C.P. shower with 15 mm or 20 mm inlet with C. P. shower arm including polishing all complete as per P.H. specification and direction of E.I.C. |
| 208 | Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C (Cerra/ Parry ware/ Hindware) |
| 209 | Sinking of 125x100mm dia tube well through Calix Rig Method Labour for drilling a perfectly vertical bore hole of specified diameter for a specified depth below ground level through hard and boulder formation by means of Calix Rig as required to suit the site condition as per the direction of the Engineer-in-charge including deployment of rigs, with its accessories, toools and plant and consumable etc. for a finished bore suitable for lowering of 125mm x 100mm nominal dia GI /PVC casing pipe fitted with socket and with or without well screen as per the necessary for soft and hard formation drilled by combination drilling method.-Labour for Drilling of 125mm dia bore 00 mtr to 35.00 mtr & 100mm dia Bore beyond 35.00 mtr. |
| 210 | Labour for lowering of following sizes of G.I/ PVC Pipes with or without strainers as per the necessity and fitted and fixed up in perfectly vertical position including, cutting and threading the pipes as may be necessary and supplying all jointing materials, extra socket (GI or PVC heavy quality) tools & Plants etc. complete and keeping the top of ciasing pipe threaded including plugging tubewells to prevent entry of foreign materials from above.- Lowering of 125mm/100mm dia PVC Casing Pipe |
| 211 | Supplying all labour, T&P and jointing materials and lowering the PVC casing pipes fitting and well screens in position including fitting of centralizer cutter plugs and washing the bore as per the direction of E.I.C.(Including cost of Materials) 125 mm dia PVC Pipe (Schedule-80) |
| 212 | 100 mm dia PVC Pipe (Schedule-80) |
| 213 | 100 mm dia PVC strainer |
| 214 | 125x100 mm dia PVC R/S |
| 215 | 100 mm dia C.I.Plug Cutter |
| 216 | Supplying all labour, T & P and packing the bore with washed gravel ( size-P-6) around the pipes in good quality including cost of gravel etc. all complete as per direction of Engineer-in-Charge- |
| 217 | Cost of Gravel |
| 218 | Supplying all labour, T&P materials and providing sanitary sealing by CC Grounding of annular space around GI/PVC Pipe up to 5mtr below G.L. to plug the bore hole including cost of cement all complete as per the direction of Engineer-in-charge. |
| 219 | Cleaning the developing the tube well using compressor continuously to get clear and adequate discharge from the tube well including the supply and use of all necessary equipment and labour as per direction of E.I.C(Labour Charges) |
| 220 | Supplying all materials, labour, tools and plants and withdrawing casing pipe form the unsucessful bore etc. all complete. |
| 221 | Supplying all labour, T&P and materials for fitting and fixing of India Mark-II Deep well Hand Pump with cast Iron cylinder, 12mm/16mm dia B.S. Connecting rod, 32mm dia G.I.Pipe of required lengths with supply of extra socket of approved make all complete including carriage, coveyance as per direction of Engineer-in-charge. |
| 222 | Supplying all labour, T&P and materials for Construction of Masonary Platform for India Mark-II Hand Pump as per I.S. Specification of 1.85 mtr Outside with Cement Concrete (1:2:4) with 12mm size hard granite C.B. chips etc. all complete including 760mmx760mmx400mm deep cement concrete embeded around the bore well pipe as per direction of Engineer-in-Charge. |
| 223 | Supplying all materials, labour, T&P and construction of 100mm wide waste water drain for India Mark-II Hand Pump platform as per UNICEF design and specification with C.C (1:2;4) using 12mm size hard granite crusher broken chips etc. all complete as per direction of Engineer-in-Charge. |
| 224 | Supplying of ISI Mark 1.00 HP Single Phase Vertical Submersible Pump Set with Discharge of 900-1000 liter/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charage. |
| 225 | Supplying all labour, T&P and fitting and fixing of 1.00 HP Single phase vertical Submersible Pump Set with commissioning and testing etc. all complete as per direction of Engineer-in-charge. |
| 226 | Supplying and fitting and fixing of ISI Mark DOL Starter of reputed make like BCH or Equivalent for 1.00 HP Single Phase Submersible Pump including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge. |
| 227 | Supplying and fitting and fixing of three core flat cable (2.5mm2) of ISI Make of reputed company line BCH/Finolex or Equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge. |
| 228 | Supplying and fitting & fixing of Plastic rope, M.S. Well Cover, M.S. Clamp, Stainless Steel Short piece, Bend & Socket including all const, conveyance and taxes etc. all complete as per direction of engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender