Tender For Repair Painting Of All Types Of Steel Furniture At Af Stn Halwara
Tender Value
30 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
9 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ludhiana → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Painting Of All Types Of Steel Furniture At Af Stn Halwara
BOQ
| Sl. No. | Item Description |
| 1 | CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAPII/05) :- Removing of board top openable with PVC edging and screwed to 25mm dia hollow steel pipe and S & F new board top openable with PVC edging and screwed to 25mm dia hollow steel pipe as per Drg, complete all as specified and directed. |
| 2 | Removing of U/S one piece Seat and Back and S&F New one piece seat and back as per drg, complete all as specified and directed. |
| 3 | CHAIR VARANDAH (FD-259):- Removing of U/S canning of seat & back of chair verandha and recanning of seat & back of chair verandha with new cane as per drg, complete all as specified and directed. |
| 4 | Removing of unserviceable Rubber shoe Chair verandah S&F with new Rubber shoes as per existing size on drg, complete all as specified and directed. |
| 5 | M & L for painting of frame of chair verandah with white synthetic enamel paint after preparation of surfaces (after removing the old cane), complete all as specified and directed. |
| 6 | CHAIR REVOLVING EXECUTIVE TYPE (TP):-Material and labour for removing old cushion foam and rexine from seat & back of chair revolving executive type and S&F new cushion foam 75mm thick foam, 32 density (Make: featerfoam/sleepwell/kurlon) and covered with new rexine not less than Rs 300/meter to chair revolving executive type as approved, complete all as specified and directed. Note : Rexine shall be heavy duty synthetic microfiber of 200-250 GSM, quality, shade and design as approved by GE. |
| 7 | Supply and fixing in replacement of arms of chair revolving exucative all as per sample, complete all as specified and directed. |
| 8 | M & L in replacement star base of chair revolving executive with heavy duty wheels, complete all as specified and directed. |
| 9 | Supply and fixing in replacement hydraulic system of chair revolving executive, complete all as specified and directed. |
| 10 | Supply and fixing in replacement wheels of chair revolving executive, complete all as specified and directed. |
| 11 | CHAIR REVOLVING /CHAIR COMPUTER (FD/E6/MAP/01 & TP):- Removing U/S old star base with caster wheels and S&F New star base including caster wheels as per drg, complete all as specified and directed. |
| 12 | Removing U/S old castor wheel and S&F New castor wheel as per drg, complete all as specified and directed. |
| 13 | Removing U/S old hydrolic system and S&F new hydrolic system as per drg, complete all as specified and directed. |
| 14 | Removing U/S old arms and S&F new arms as per drg, complete all as specified and directed. |
| 15 | Removing old U/S upholstry of seat with cushion foam and S & F new good quality of upholstry of seat with cushion foam matching with existing as shown in drg, complete all as specified and directed. |
| 16 | Removing old U/S upholstry of Back with cushion foam and S & F new good quality of upholstry of Back with cushion foam matching with existing as shown in drg, complete all as specified and directed. |
| 17 | Removing of existing unserviceable tepastry of seat and S&F with new tepastry as shown in drg, complete all as specified and directed. |
| 18 | Removing of existing unserviceable tepastry of back and S&F with new tepastry as shown in drg, complete all as specified and directed. |
| 19 | CHAIR VISITOR/CONFRENCE (TP):-Removing old U/S seat of visitor and S &F new seat of chair visitor with 75mm thick foam, 32 density with new tapestry cloth in dark colour as approved, complete all as specified and directed. Note : Tapestry cloth shall be heavy duty synthetic microfiber of 200-250 GSM, quality,shade and design as approved by GE |
| 20 | All as per Srl item 5.00 here in before but back of chair visitor. |
| 21 | Removing old U/S tapestry cloth and S&F new tapestry cloth of chair visitor, complete all as specified and directed Note : Tapestry cloth shall be heavy duty synthetic microfiber of 200-250 GSM, quality,shade and design as approved by GE. |
| 22 | Removing old U/S arms and S&F new arms of chair visitor all as per sample, complete all as specified and directed. |
| 23 | M & L for Gas welding to frame of chair visitor including preparation of surface and removing the unwanted welding spot, complete all as specified and directed. |
| 24 | M & L for painting to frame of chair visitor with black synthetic enamel paint including preparation of surface, complete all as specified and directed. |
| 25 | CHAIR TUBULAR STEEL WITH ARMS (FD-75) :-Removing old U/S Seat of Chair CB Steel with arms and M & L for modification of seat of chair Tubular steel with arms by providing seat made of 75 mm thick cushion, 32 density duly covered with rexine of approved shade to be fixed over 6mm thick plywood commercial as per sample, complete all as specified and directed. |
| 26 | All as per Srl item 6.00 here in before but seat of chair tubelar steel without arms |
| 27 | All as per Srl item 6.00 here in before but back of chair tubular steel with arm to be made out of 50 mm thick cushion of 32 density fixed on commercial ply 6 mm thick. |
| 28 | All as per Srl item 6.00 here in before but back of chair tubular steel with out arm to be made out of 50 mm thick cushion of 32 density fixed on commercial ply 6 mm thick. |
| 29 | M & L for Gas welding to frame of chair tubular steel including preparation of surface and removing the unwanted welding spot, complete all as specified and directed. |
| 30 | M & L for painting to frame of chair tubular steel with/ with out Arms with black synthetic enamel paint including preparation of surface, complete all as specified and directed. |
| 31 | BED HARD IP STEEL (FD/E6/Map-05) :- Removing of existing unserviceable 18mm thick prelaminated particle board of Head board & Foot board and S&F with new 18mm thick prelaminated particle board, exterior grade of Head board & Foot board including pvc beading as shown in drg, complete all as specified and directed. |
| 32 | Removing of existing unserviceable rubber shoe and S&F with new rubber shoe as shown in drg, complete all as specified and directed. |
| 33 | Removing existing unserviceable plywood top and supplying & fixing new 12 mm thick plywood ISI Marked BWR as per drg, complete all as specified and directed. |
| 34 | Rejoining the joints of MS tube with spot weilding of broken joints not exceeding 25mm in length as and where required as per drg, complete all as specified and directed. |
| 35 | M&L applying one coat of synthetic enameled paint black colour including preparation of all steel surfaces complete all as specified and shown on drg, complete all as specified and directed. |
| 36 | ALMIRAH LARGE STEEL WITH SHELVES (FD-1031):- Removing old U/S 6 Liver Lock and S & F new 6 Liver Lock with Duplicate Key as shown in drg, complete all as specified and directed. |
| 37 | Removing old U/S handle and S & F new handle 150mm long as shown in drg, complete all as specified and directed. |
| 38 | Removing old U/S hings and S & F new hings as shown in drg, complete all as specified and directed. |
| 39 | Removing old U/S Leg and S & F new Leg of Almirah Large Steel as shown in drg, complete all as specified and directed. |
| 40 | Removing of U/S shelves and supply and fix new shelves all as shown in drg, complete all as specified and directed. |
| 41 | Removing old U/S Locking assembly with iron plate & 02 rods 10mm & lock cover & S/F new locking assembly set as per drg, complete all as specified and directed. |
| 42 | Refixing loose shelves with spot welding of broken joints not exceeding 25mm in length, complete all as specified and directed. |
| 43 | Removing unserviceable existing door shutter of almirah large with shelves steel made out of PBI sheet 1mm thick complete as shown in drg, complete all as specified and directed. |
| 44 | ALMIRAH MEDIUM STEEL WITH SHELVES (FD-243/1032):- Removing old U/S 6 Liver Lock with S & F new 6 Liver Lock with Duplicate Key as shown in drg, complete all as specified and directed. |
| 45 | Removing old U/S handle with S & F new handle 150mm long as shown in drg, complete all as specified and directed. |
| 46 | Removing old U/S hings with S & F new hings as shown in drg, complete all as specified and directed. |
| 47 | Removing old U/S Leg with S & F new Leg of Almirah Small Steel as shown in drg, complete all as specified and directed. |
| 48 | Removing old U/S Locking assembly with iron plate & 02 rods 10mm & lock cover & S/F new locking assembly set complete of Almirah Small Steel as per drg, complete all as specified and directed. |
| 49 | Refixing loose shelves with spot welding of broken joints nut exceeding 25mm in length, complete all as specified and directed. |
| 50 | Removing of U/S shelves and S&F new shelves made out of 1 mm thick PBI sheet as per existing of size 650 mm of almirah medium with shelves complete all as per drg, complete all as specified and directed. |
| 51 | Removing unserviceable existing door shutter of almirah med steel made out of 1 mm thick PBI sheet complete all as per drg, complete all as specified and directed. |
| 52 | LOCKER BED SIDE STEEL (FD-257/1029):- Removing of U/S Hasp & Staple with S&F New Hasp and Staple as per drg, complete all as specified and directed. |
| 53 | Removing of U/S Handle with S&F New Handle as per drg, complete all as specified and directed. |
| 54 | Removing of U/S Leg with S&F New Leg as per drg, complete all as specified and directed. |
| 55 | Removing of U/S shelf with S&F new shelf as per drg, complete all as specified and directed. |
| 56 | Removing unserviceable existing door shutter of locker steel made out of 1mm thick PBI sheet, complete all as specified and directed. |
| 57 | Removing worn out unserviceable aluminium rod 20 mm dia and S&F new aluminium rod as per existing all as shown on drawing, complete all as specified and directed. |
| 58 | Refixing loose shelves with spot welding of broken joints not exceeding 25mm in length, complete all as specified and directed. |
| 59 | TEAPOY VARANDAH (FD/E6/MAP/17/FD-255):- Material and labour for removing of old unserviceable top of Teapoy Varandah and supply and fixing of new top made out of 18mm thick prelaminated particle board with TW edging 6mm thick, complete all as specified and directed. |
| 60 | M & L for painting of frame of Teapoy verandah with black/white synthetic enamel paint after preparation of surface, complete all as specified and directed. |
| 61 | M & L for Gas welding to frame of Teapoy varandah including preparation of surface and removing the unwanted welding spot, complete all as specified and directed. |
| 62 | Supply and fixing in replacement frame of Teapoy Verandah with 18mm square MS pipe 0.5 mm thick duly gas welding, complete all as specified and directed. |
| 63 | M & L for Gas welding to unserviceable portions of 5mm dia MS bar base tray of Teapoy Verandah, complete all as specified and directed. |
| 64 | Supply & fixing in replacement hard rubber shoe to the leg of Teapoy Varandah of standard approved quality heavy duty, complete all as specified and directed. |
| 65 | CHARPOY IP STEEL (FD/E6/MAP-II/01) :-S&F in replacement plywood commercial 12mm thick of size 1980x900mm, grade BWR, type BB and fixed to frame of Charpoy IP steel with appropriate sized nut, bolts, washer, complete all as specified and directed. |
| 66 | CHARPOY FOLDING IP WITH HARD TOP (FD-385) :- S & F in replacement of plywood commercial 9mm thick of size 990x830mm x 02Nos, grade BWR, type BB and Fixed to frame of Charpoy IP Folding with 07 Nos GI nut, bolt 6mm dia, 62 to 65mm long with washer at both ends and nuts 02 Nos on each rail and tube, complete all as specified and directed. |
| 67 | TABLE OFFICE CLK STEEL (FD-1004, 84(M)) :- Removing U/S Lock with S&F New Lock as per Drg, complete all as specified and directed. |
| 68 | Removing U/S drawer with S&F New drawer as per Drg, complete all as specified and directed. |
| 69 | Removing of U/S Top with S&F New Top as per drg, complete all as specified and directed. |
| 70 | Removing of U/S Rubber Shoe with S&F New Rubber Shoe as per drg, complete all as specified and directed. |
| 71 | Rejoining the joints of MS square tube with spot weilding of broken joints not exceeding 25mm in length as and where required as per drg, complete all as specified and directed. |
| 72 | TABLE STEEL 900x900 MM (FD-1009) :- Removing unserviceable table top & Supplying and fixing new table top, 18 mm thick prelaminated particle board, one side decorative lamination and other side balancing white lamination, Medium density, exterior grade with 4 mm thick Teak wood beading duly French polished, complete all as specified and directed. |
| 73 | Provision of 300 mm long MS clamps made of 3 mm thick MS flat by welding including bending, complete all as specified and directed. |
| 74 | Taking down and S&F new rubber shoes to the legs of the table, complete all as specified and directed. |
| 75 | Rejoining the joints of MS square tube with spot weilding of broken joints not exceeding 25mm in length as and where required as per drg, complete all as specified and directed. |
| 76 | TABLE OFFICE OFFICER STEEL (FD-1003, 84(M)):- Removing U/S Lock with S&F new Lock as per Drg, complete all as specified and directed. |
| 77 | Removing U/S drawer with S&Fnew drawer as per Drg, complete all as specified and directed. |
| 78 | Removing of U/S Top with S&F new Top as per drg, complete all as specified and directed. |
| 79 | Removing of U/S Rubber Shoe with S&F new Rubber Shoe as per drg, complete all as specified and directed. |
| 80 | Removing and replacement of unserviceable legs and S&F new legs made out of 25mm dia MS 1.6mm wall thickness as shown in drg, complete all as specified and directed. |
| 81 | Removing and replacement of unserviceable stiffener and S&F new stiffener made out of 25mm dia MS 1.6mm wall thickness as shown in drg, complete all as specified and directed. |
| 82 | Rejoining the joints of MS square tube with spot weilding of broken joints not exceeding 25mm in length as and where required as per drg, complete all as specified and directed. |
| 83 | RACK SHOE STEEL (FD/E6/MAP/02 (R)):- M & L for Gas welding to frame of Rack shoe steel including preparation of surface and removing the unwanted welding spot, complete all as specified and directed. |
| 84 | M & L for painting of all portion of Rack shoe steel with black synthetic enamel paint after preparation of surface, complete all as specified and directed. |
| 85 | Supply and fixing in replacement of unserviceable portions main frame welded to leg of Rack shoe steel with 18 Gauge 25mm dia square MS pipe duly gas welding, complete all as specified and directed. |
| 86 | Supply and fixing in replacement of unserviceable portions Jali frame work of Rack shoe steel with 3mm dia MS Rod duly gas welding, complete all as specified and directed. |
| 87 | Supply & fixing of hard rubber shoe to the leg of Rack shoe steel of standard approved quality, complete all as specified and directed. |
| 88 | TABLE COMPUTER (FD/E6/MAP/03) :- Removing top of table computer and S&F 900x600 mm with 18 mm thick pre-laminated particle board as per existing with pressed plastic beading all round edge of table, complete all as specified and directed. |
| 89 | Removing vertical of table computer and S&F 650 x 150 mm with 18 mm thick pre-laminated particle board as per drg, complete all as specified and directed. |
| 90 | Removing U/S Key Board Tray including telescopic channel and S&F new Key Board tray with telescopic channels as per drg, complete all as specified and directed. |
| 91 | Removing U/S drawer including telescopic channel and S&F new drawer with telescopic channels as per drg, complete all as specified and directed. |
| 92 | Removing U/S pull out tray including telescopic channel and S&F new pull out tray with telescopic channels as per drg, complete all as specified and directed. |
| 93 | Removing U/S shelf size 450x230mm including vertical partition support and S&F new shelf size 450x230mm including vertical partition support as per drg, complete all as specified and directed. |
| 94 | M&L applying one coat of synthetic enameled paint black colour including preparation of all steel surfaces complete all as specified and shown on drg, complete all as specified and directed. |
| 95 | RACK STEEL (FD-1038):- Refixing of existing shelf with nut & bolt 25mm long duly straightening the bend, complete all as specified and directed. |
| 96 | S & F in repair shelf made of MS black sheet of 1mm thick (20 guage) duly spray painted with synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 97 | S & F in repair 1905 mm long leg made out of angle Iron of Size 40 mm 40mm x4mm thick, complete all as specified and directed. |
| 98 | Material and labour for repainting of Almirah Larze Steel (FD-1031) with synthetic enamel paint by spray painting as per the following steps:- (i) denting of bent surfaces with the help of hammer in best workmanship manner. (ii) removing old paint by scrubbing with sand paper 150 No thoroughly. (iii) applying one coat of metal primer (iv) Applying metal putty to even the surface. wait period of 2 - 3 hours to be given for putty to set and dry completely. scrub off the excess putty with 150 No sand paper and spraying little amount of water simultaneously. (v) wipe the surface with soft dry cloth and apply one coat of enamel paint of light shade as approved by GE and as specified by Engineer-in-charge. |
| 99 | All as per ser Item No.20.00 but Almirah medium steel with shelves-FD-1032. |
| 100 | All as per ser Item No. 20.00 but Locker Bed Side Steel-FD-1029. |
| 101 | All as per ser Item No. 20.00 but Bed IP Steel-FD/E6/MAP/08. |
| 102 | All as per ser Item No.20.00 but Table bedside steel Portion-FD/E6/MAP/15. |
| 103 | All as per ser Item No.20.00 but Table computer Steel Portion-FD/E6/MAP/03. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender