Tender For Construction of Electrical Installation Work Of Packing Grading Shed At Takarla, Distt Una, H.P.
Tender Value
4.06 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
1 days left
EMD
8200
Bank guarantee accepted
Document Fee
415
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Una → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Electrical Installation Work Of Packing Grading Shed At Takarla, Distt Una, H.P.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Sep-2026 | Date Extension_6 | Date | 03-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVCl conduit with modular switch, modular plate, suitable GI box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic,Philips, Panasonic Akina, Crabtree Athena & WIres Make: Finolex,KEI,Anchor,Polycab,Plaza make) Group C |
| 2 | Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Finolex,KEI,Anchor,Polycab,Plaza make) |
| 3 | Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Finolex,KEI,Anchor,Polycab,Plaza make) |
| 4 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.(Finolex,KEI,Anchor,Polycab Plaza make) 2x1.5 Sq. mm.+1x1.5 Sq.mm |
| 5 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.(Finolex,KEI,Anchor,Polycab Plaza make) 6x6Sq.mm.+1x4 Sq.mm |
| 6 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.(Finolex,KEI,Anchor,Polycab Plaza make) 4x10Sq.mm.+1x6 Sq.mm |
| 7 | Supplying and fixing suitable size GI box with modular plate and cover in FRLS on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (Make of switches: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena, ABB Adiva, Schneider Electric Clipsal)as approved by Engineer-In-Charge |
| 8 | Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.(Finolex,KEI,Anchor,Polycab Plaza make) 2.5x5 Sq.mm |
| 9 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection painting with complete finish etc. as required. Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena |
| 10 | Supplying and fixing 5/6 amp Modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena |
| 11 | Supplying and fixing 3 pin 5/6 amp socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena |
| 12 | Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- (Hager,ABB,L&T,Schneider make) Single pole. 6 Amps. Cate-C |
| 13 | Supplying and erection of following rating, double pole 240 volts, Isolator in the existing MCB DB complete with connections etc. as required:- (Legrand/Hager/ABB/L&T make) Double pole 63. Amps Cat-A |
| 14 | Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Hager,ABB,L&T,Schneider make)63 Amps. Cat-A |
| 15 | Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- (Hager,ABB,L&T,Schneider make) Double door-16 way |
| 16 | Providing, Installation, testing and commissioning of 1200mm BLDC ceiling fan,without fan regulator air delivery 215 m3 /min, minimum speed 330 RPM,including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-(Make: Usha Technix BLDC ISI, Orient Echotech Prime, Havells Efficiencia, Bajaj Energos 26, Anchor Ecobreez Urban 3 Blades, Crompton Energion HS Groove Hyperjet only) |
| 17 | Supply,Erection,Installation and commissioning of Uniearth maintenance free chemical earthing system consisting of environment friendly ground enhancing compound 'G.E.C' 50kg or as required at site having anticorrosive and hygroscopic properties to replace excavated soil. It should consist of Uniearth copper bonded electrodes, as per site conditions and soil resistivity at various depth levels and different terrains. The electrodes should have coating of 250 microns of molecularly bonded pure electrolytic copper(99.9%) in 2 meter length,17.2 mm diameter,terminal joint 200X25X6mm GI Strip with exothermic welds. The electrode should be duly tested and certified by CPRI for 30kA short time current test for 1 sec rms. |
| 18 | Supplying and laying 6 SWG GI wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required. |
| 19 | Supplying and fixing two module stepped type fan regulator (Socket type) 100 watts on the existing switch box/cover complete making connections etc,as required.Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena |
| 20 | Supplying and fixing fan of M.S. sheet with iron rod Hook 12mm in place of junction box complete with Bakelite Round sheet as required. National/Anchor/ L&T |
| 21 | Providing and installation of metal body exhaust fan of following sizes in the existing opening, with minimum Air Delivery 1050 m3/min including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- (Usha Aeroclean LD, Orient Air Flow, Crompton Drift Air Plus Metal Anti Dust, Anchor Anmol Deluxe-R, Havells Ventil Air DS Only) Exhausl Fan, Heavy duty 600 mm sweep |
| 22 | Supplying and fixing exhaust fan louver shutter for 600 mm.exhaust fan on the existing wall,painting etc, as required. Make: National/Anchor/ MK |
| 23 | Providing and fixing LED Batten Light of IP20 Led fixture 36W+/- 1W with Surface Mounted 4 Feet with Polycarbonate housing having minimum system lumen output 1000 lumens and system lumen efficacy of 100 lm/W with P.F.>0.95 with THD<20% ,CRI 80 .The LED with Useful life of 50000 Hrs at L70 . The LEDs used in the luminaire shall have CCT of ANSI Bin 6500 K with CRI of minimum 80.The Input voltage range shall be 150V to 270V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. . Make:-Havell/ Wipro/ Panasonic / Phillips / Leksa. |
| 24 | Supplying and fixing batten/ angle holder including connection etc. as required Make:-Havell/ Wipro/ Panasonic / Phillips / Leksa. |
| 25 | Supplying and fixing street light LED 50watt die cast Aluminium housing with frame and toughened glass, pipe mounting 5700k, (Three YEAR WARRANTY) and it should be compatible with specification e.i. Power Factor >.9, Harmonic Distortion<10% and efficacy >120 Lumens per watt, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. Make - PanaspnicPSTM27358 /Philips/wipro/ as approved by Engineer-in-Charge with five year warranty |
| 26 | Providing and installation of 3 Phase electrical panale 1200x900mm including 10HP motor strater complete in all respect. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 03, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender