Tender For Development Of Garden At Open Space Beside Abubakar Masjid At Prabhag No 13
Tender Value
20.85 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
5 days left
EMD
20855
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aurangabad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Garden At Open Space Beside Abubakar Masjid At Prabhag No 13
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. BDW 8 46.09 - As directed by Engineer in charge.(SSR No.: 46.09) |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.)By Mechanical Means BDA 1 21.02 - Bd.A.1 Page No. 259(SSR No.: 21.02) |
| 3 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.)By Mechanical Means BDA 2 21.08 - Bd.A.2 Page No. 259(SSR No.: 21.08)- |
| 4 | Transportation of surplus material from work site to any disposal place as directed by the Engineer - in - charge with a lead ofkm including and stacking etc. complete.(As per PWD DSR 2002-2003) 25-1.00 murum/rubbish, earth lime(SSR No.: -)1.00 murum/rubbish, earth lime |
| 5 | Providing soling using 80 mm size trap metal in15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. BDA 21.40 - As directed by Engineer in charge.(SSR No.: 21.40)- |
| 6 | Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum rtype mixer with SCADA with Natural / VSI standard Artificial Sand) CD 3A 11.02 - CD.-3 Page.No. 160(SSR No.: 11.02)- |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork , cover bl o c k s , l ay i n g / p u m p i n g, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand BDF 3 25.13 - Bd.F.3 page no.298 and B.7,Page no.38(SSR No.: 25.13)- |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover b l o c k s , l a y i n g / p u m p i n g , c o m p a c t i o n a n d roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand BDF 3 25.50 -(SSR No.: 25.50)- |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. work in columnslike raft, strip foundations, grillage and footings of R.C.C. columns as per drg--etc BDF3 25.31 - Bd.F.3 page no.298 and B.7,Page no.38(SSR No.: 25.31)- |
| 10 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters forR.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. BDF 17 26.33- Bd. F. 17 Page No. 306 /I.S. 456 (2004(SSR No.: 26.33)- |
| 11 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc.Complete BDG 4 27.05 - 0(SSR No.: 27.05)- |
| 12 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. BDL 3 32.11 - Bd.L.3 Page No. 368(SSR No.: 32.11)- |
| 13 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. BDT 40.01 - As directed byEngineer in charge.(SSR No.: 40.01)- |
| 14 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. BDC 2 23.01 - Bd.C.2 Page No. 275(SSR No.: 23.01)- |
| 15 | Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete.Spec. No. : As directed by Engineer-in-charge.BDC 23.07 - B-18 Page No. 78(SSR No.: 23.07)- |
| 16 | Providing and fixing 50 mm. dia. medium class G.I.pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete. BDC 23.05 - As directed by Engineer in charge.(SSR No.: 23.05)- |
| 17 | Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVINGBLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand) BDM 33.53 - As directed by Engineer in charge(SSR No.: 33.53)- |
| 18 | Providing and casting in situ or precast taperingR.C.C. M-20 Mountable type Kerb with gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly withC.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant MORTH 4097.05 - MORTH(SSR No.: 7.05)- |
| 19 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc c o m p l e t e . NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary BDO35.26 - As directed by Engineer in charge.(SSR No.: 35.26)- |
| 20 | P/F WOODEN FINISH BENCHES HAVING 1435 MM LONG X787 WIDEX 584 MM HEIGHT WITH WROUGHT IRON METAL APPROX WT 40 KG,350 KG LOAD CARRYING CAPACITY FOR 3 ADULTS FOR INDDOR AND OUTDDOR AS DIRECTED AND AS PER DESIGH AS DIRECTED--ETC [AS/LOWEST RATE] 1967-CASTING BENCH(SSR No.: ) |
| 21 | PROVIDING AND FIXING 3 MM THICK ACP PANNEL NAME BOARD AS PER GIVEN MATTER ASS DESIGN AND ASDIRECTED BY ENGINEER INCHARGE (AS PER APPROVED RATE?LOWEST QUOTATION)(SSR No.: ) Contractor has to quote on Work Portion Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender