Tender For Repair/ Replacement Of Tiling Work, Kitchen Platform, Cup Boards In Md Accn In Nofra Area & Civilian Officers Md Accn Under Age B/R I At Naval Station Karanja
Tender Value
45 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
19 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Tiling Work, Kitchen Platform, Cup Boards In Md Accn In Nofra Area & Civilian Officers Md Accn Under Age B/R I At Naval Station Karanja
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth or wall (ceramic/mosaic) tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for coloured Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in CM(1:6), complete all as specified and directed |
| 3 | M&L for Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed |
| 4 | M&L for Vitrified Ceramic tiles (dark shade)10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand laid over and including 10mm thick screed bed in CM 1:4 to recieve tiles complete all as specified and directed |
| 5 | M&L for Vitrified Ceramic tiles (dark shade10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand laid over and including 10mm thick backing coat in CM 1:3 to recieve tiles complete all as specified and directed |
| 6 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons, cills, dado, skirting etc. laid bedded & pointed in any mortar complete all as specified and as directed. |
| 7 | M&L for Machine cut kota stone slab 20-25 mm thick as in flooring, laid over and including 20 mm thick screed bed in CM 1:3 set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab including rubbing and polishing etc. complete all as specified and directed. |
| 8 | M&L for machine cut kota stone slab 20-25 mm thick as in vertical surfaces such as riser of steps, skirting, dado and pillar etc., laid over and including 10 mm thick backing coat in CM 1:3 set and jointed in neat cement slurry and pinted with cement and pigment to match the shade of the slab including rubbing and polishing etc., complete all as specified and as directed. |
| 9 | M&L for granite(of any type)tiles 20mm thick as in floors and similar works laid over and including 20mm thick cement screed in CM 1:3, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone including cutting, polishing etc. complete all as specified and directed |
| 10 | M&L for granite (of any type)tiles 20mm thick as in skirting/dado and similar works laid over and including 10mm thick screed/backing coat in CM 1:3, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match including cutting, polishing etc. complete all as specified and directed |
| 11 | Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. |
| 12 | Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. |
| 13 | Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each and refixing in same opening, complete all as specified and directed. |
| 14 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately), complete all as specified and directed. |
| 15 | M&L for 2nd class HW, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chanbered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge |
| 16 | S&F 200mm long and 10-15mm dia MS fasteners all as specified, complete all as specified and directed by Engr-in-Charge |
| 17 | S&F 35mm thik plain, framed, factory made panelled shutter(two panel) with lock rail and panel of 9 mm B.W.P. commercial veneering particle board on both faces. The size of rail and stile as per IS : 1003(Part-1), kiln in seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge. |
| 18 | S&F 35mm thick 2nd class HW, glazed and skelton shutters open rebated and prepared to receive glass / gauge (without sash bar) edges of forming plain chamfered orrounded fitted with cut and mitred bead for securing glass / gauge etc size of shutter as per SSR part-1 section 8 clause 8.24(a), complete all as specified and directed by Engr-in-Charge |
| 19 | S&F in repaies, Factory made single extruded WPC (Wood Polymer Composite) solid plain cupboard /Wardrobe 20mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 20 | S&F in repaies, Factory made single extruded WPC (Wood Polymer Composite) solid plain cupboard /Wardrobe 12mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 21 | S&F Factory made solid panel PVC door shutter 30mm (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90o) used instead of exposed portion of PVC sheet beading panelling of wood grain printed PVC sheets to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supling & fixing in the frame at the site as per specification and drawing shown in SSR Pt-I complete all as specified and directed by Engr-in-Charge |
| 22 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet fixing in opending as per specification and drawing etc complete all as specified and directed by Engr-in-Charge |
| 23 | S&F MS butt hinges100mm long medium weight, cold rolled, complete all as specified and directed |
| 24 | S&F in repairs MS butt hinges100mm long medium weight, cold rolled, complete all as specified and directed |
| 25 | S&F 100 mm long, butt hinges, extruded aluminiumalloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed |
| 26 | S&F in repairs 100mm long, butt hinges, extruded aluminiumalloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed |
| 27 | S&F 125 mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed |
| 28 | S&F in repairs 125 mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed |
| 29 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed |
| 30 | S&F in repairs 150 mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed |
| 31 | S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed |
| 32 | S&F in repairs 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed |
| 33 | S&F 150mm long Aluminium, anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed |
| 34 | S&F in repairs 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 35 | S&F 200mm long Aluminium, anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed |
| 36 | S&F in repairs 200mm long Aluminium, anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed |
| 37 | M&L for preparation of new wooden surfaces over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed |
| 38 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed |
| 39 | S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed |
| 40 | S&F Rim latch with 2 levers, of brass body, polished bright, stove enamelled finish; with brass knob or lever handle etc complete all as specified and directed |
| 41 | S&F aluminium louvers with levers and locking arrangements suitable for fixing 100mm wide 4 to 6 nos frosted glass complete all as specified and directed |
| 42 | S&F in repairs star lock for window incl all necessary fittings complete all as specified and as directed. |
| 43 | S&F in repairs aluminium windows bearing per any size of windows (including taking and refixing the same position) complete all as specified and as directed. |
| 44 | Hacking out old broken glass (any thickness, size, quality or description) from any frame surrounds, glazed with putty or fixed with beads, complete all as specified and directed |
| 45 | S&F 4 mm thick sheet glass ordinary quality and glazing complete in square n exc 0.50sqm each, complete all as specified and directed |
| 46 | S&F 4 mm thick sheet glass ordinary quality and glazing complete in square exc 0.50sqm each complete all as specified and directed. |
| 47 | S&F 4mm thick frosted glass, ordinary quality and glazing with oil putty of any size pane complete all as specified and directed |
| 48 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed |
| 49 | M & L 5 mm thick ready mixed cement base plaster on concrete surfaces of ceilling complete all as specified and directed. |
| 50 | M & L 10 mm thick ready mixed cement base plaster on internal surfaces on brick or concrete surfaces complete all as specified and directed. |
| 51 | M & L for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed. |
| 52 | M & L for preparation of newly or untreated plastered surface applying two coats of oil bound distemper (OBD) over a coat primer complete all as specified and directed. |
| 53 | S&F in repair 12 mm thick Pre-laminated particle board, exterior grade, prelaminated on both side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws and incl all fittings, tower bolt, handle, knob, magnet to timber frame work complete all as specified and directed. |
| 54 | S&F in repair 18/19mm thick Pre-laminated particle board, exterior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws and incl all fittings, tower bolt, handle, knob, magnet to timber frame work complete all as specified and directed. |
| 55 | S &F in repair 30mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed by Engr-in-Charge |
| 56 | S&F in repair 150mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer in Charge. |
| 57 | S&F in repair cutrain rails / Harrison rails, mild steel, chromium plated (Medium weight) fixed with brackets, stops, rollers etc. complete all as specified and directed by Engr-in-Charge |
| 58 | Supply and fixing in repairs of 04 pieces pulley operated cloths drying system of existing make consisting of aluminium pipe of outer dia 22 mm inner dia 19.8 mm and channel pair of length 2.00 mtr with pully made up of devil mounted and fixed with selg tapping screw. Rope will be HDPE doble core of 4 mm with rope Guide at locking system to hiderope Channel to be dia of minium weight of pipe shall bot be less than 0.20kg/Rm and maximum weight of pipe in one unit not less than 2 kg weight of rope shall be not less than the 550 gms/ mtrs including taking down old unserviceable cloth hanger complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender