Tender For Ge(Af)/Bly/T-47 Of 2026-2027 : Provn Of Certain Works Services For Creation Of Disabled Friendly Infra At Afs Bareilly Under Ge (Af) Bareilly
Tender Value
14.55 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
13 days left
EMD
29100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Ge(Af)/Bly/T-47 Of 2026-2027 : Provn Of Certain Works Services For Creation Of Disabled Friendly Infra At Afs Bareilly Under Ge (Af) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified including removal of debries from site to outside MoD land. |
| 2 | M&L for sand filling under floors or foundation including watering, ramming, consolidating and dressing complete not execeeding 30cm in layers all as specified. |
| 3 | M&L for fly ash brick works using old size bricks, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 all as specified. |
| 4 | M & L for providing reinforced cement concrete 1:1.5:3 (Nominal Mix) type B-1 using 20 mm graded stone aggregate as in landings, cover slabs (for man holes), chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces and the like complete all as specified. |
| 5 | M&L for formwork to sides and soffits of floor or roof beams, lintel, cantilevers, shelves including supports, overhangs etc. for rough finished flat surface of concrete all as specified. |
| 6 | M&L for stainless steel grade 304 as in railing made of hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of floor or the side of waist slab with suitable arrangement all as specified. |
| 7 | S&F for tactile tile (for vision impaired persons as per standards) of size 300mmx300mmx9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc. laid on 20 mm thick screed bed in cement mortar 1:4 in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete all as specified and directed by Engineer-in-Charge. |
| 8 | S&F for parking tiles, first-quality, heavy duty conforming to IS: 15622 for disabled person accessibility on ramps and having an engineered matt punched/structured surface providing an anti-skid slip resistance rating of R11/R12 conforming to DIN 51130 or a dynamic coefficient of friction (DCOF) 0.60 under wet testing standards. Minimum tile thickness shall be 12mm to 16mm of size 300mm x 300 mm or more to support wheelchair load-bearing configurations and to be laid over 20mm thick screed bed in cement mortar (1:4). The process includes preparing the ramp base, applying a neat grey cement slurry stabilization coat @ 3.3 kg/Sqm, arranging accurate line and gradient slopes not exceeding 1:12 profile complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint all as specified. |
| 10 | M&L for 15 mm thick rendering in cement mortar (1:4) on brick or concrete surfaces including finishing fair and even surface without using extra cement but mixed with liquid WPC as per manufacturer instruction all as specified (Note :- WPC will be measured and paid separately). |
| 11 | Supply only liquid water proofing compound all as specified. |
| 12 | M&L for mild steel TMT bar 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips all as specified. |
| 13 | M&L for cement concrete 1:4:8 mix type D-2 using 40mm graded stone aggregate as in foundation,filling and mass concrete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender