Tender For Special Repairs To Bldg No P-Vii (Partly), Bldg No P-22A (Partly) , Or Toilet / Bathroom And External Services Alongwith Repair To Path And Hardstanding And Provn Of Toilets And Bathroom To Or At Db Area Under Ge Chennai
Tender Value
47.50 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
6 days left
EMD
95000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No P-Vii (Partly), Bldg No P-22A (Partly) , Or Toilet / Bathroom And External Services Alongwith Repair To Path And Hardstanding And Provn Of Toilets And Bathroom To Or At Db Area Under Ge Chennai
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Sep-2026 | date_corrigendum | Date | 10-Oct-2026 |
| 2 | 30-Sep-2026 | BOQ_corrigendum | BOQ | 10-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc but including ashlars facings, dressed stone work and pre cast concrete articles and disposal off outside defence land complete all as specified and as directed. |
| 2 | M & L for Brickwork with fly ash bricks , straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed. |
| 3 | M & L for Brickwork with fly ash bricks ,straight or curved in any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and as directed. |
| 4 | M&L for PCC type B1 1:2:4 (12.5mm graded aggregate) as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed compete all as specified and directed. |
| 5 | Taking down cement plaster on brick work or stone walls etc including racking out of joint , hacking for key scrubbing down with water etc and disposal off outside defence land complete all as specified and as directed. |
| 6 | M&L for rendering 5mm thick in CM 1:3 on ceiling area , finished even and smooth without using extra cement all as specified and directed. |
| 7 | M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 8 | Dubbing out average 15mm thick on irregular face of walls/ ceilings in patches in CM (1:4) complete all as specified and directed. |
| 9 | M & L for applying three coat of white wash as in ceiling incl preparation of newly plastered ceiling surfaces all as specified and as directed. |
| 10 | M & L for Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 11 | M & L for Preparation of new plastered surfaces of wall and applying plaster of Paris putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete all as specified and as directed |
| 12 | M & L for complete removal of existing treatment on old wall surfaces and applying plaster of paris putty of 1 mm thickness over a coat of primer and prepare the surface even and smooth and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete all as specified and as directed. |
| 13 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls all as specified and as directed by the Engineer-in-Charge. Make : APEX of Asian or equivalent of Shalimar / Nerolac/ Berger. |
| 14 | Complete removal of existing treatment & Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls all as specified and as directed by the Engineer-in-Charge. Make : APEX of Asian or equivalent of Shalimar / Nerolac/ Berger. |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 16 | M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W(Gde-E- 250) quality-B complete all as specified and directed. |
| 17 | S&F for rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. Fe-410- W(Gde- E-250) quality- B (cut to ordinary lengths i.e. Within 20mm of the length indicated) all as specified and directed. |
| 18 | M & L for Cutting holes into or through brick walls built in cement mortar and making good in PCC (1:2:4) type B-1 as required Superficial area exc 400 Sqcm but not exceeding 0.10Sqm complete all as specified and as directed. |
| 19 | M & L two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, surfaces of any description , over 10cm width or girth not other wise described complete all as specified and as directed. |
| 20 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 21 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & ramming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface soft/loose soil complete all as specified and directed. |
| 22 | M & L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed |
| 23 | S&F Steel work FE-410 in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 24 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 25 | S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 26 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area nexc.1.5 sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge. |
| 27 | Taking down chowkats or frames with shutters (with out taking off shutter from the frame) of any description exc 1.5 sqm and n.exc 4 sqm each complete all as specified and as directed. |
| 28 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification and directed. |
| 29 | S & F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed. |
| 30 | S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. (Thickness of powder coating not less than 50 micron) |
| 31 | S&F for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified. |
| 32 | S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples fixed to wood/steel frames complete all as specified and as directed. |
| 33 | S&F aluminium powder coated sliding window using three track alumimium section weighing not less than 0.900Kg per RM for frame and 0.48 Kg per RM for sliding shutters including fixed with sash bars aluminium anodised snap beads, screws and fixed alongwith same section in three sliding shutters two for fully glazed with 4 mm thick tinted glass fixed with glazing clips, and one for wiremesh shutterswith stain less stell wire cloth etc (The rate is inclusive of all fixings of builders hard ware such as wirmesh hinges, handles, locking arrangements etc complete all as specified and directed |
| 34 | S & F in repair 12 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber / aluminium frame work complete all as specified and as directed. |
| 35 | M&L for in repair Prelaminated particle board 18/19 mm thick exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws as in cupboard shutter and shelves etc fixed in repairs including Ist class hard wood bedding all around the shutter and paints with synthetic enamel paint to beading complete all as specified and as directed. |
| 36 | M & L for 6mm thick external teak wood lipping over 18/19mm thick particle board/plywood fixed with nails complete all as specified and as directed. |
| 37 | S&F in repair continuous (piano)hinges mild steel, bright finish or electro galvanised width of flaps (when open)in mm 30mm complete all as specified and as directed. |
| 38 | Supply and Fix in repairs Locks, cupboard shutters grade I, size 75 mm Brass 4 levers complete all as specified and as directed. |
| 39 | S & F in repairs stainless steel Cabinet Hinges/self closing hinges (Bombay Hinges) complete all as specified and as directed |
| 40 | S & F in repairs Magnet closures to cabinet cupboards complete all as specified and as directed. |
| 41 | Supply and Fix in repair 4 levers Mortice Locks with stainless steel handle, vertical type, size 100mm Brass complete all as specified and directed. |
| 42 | S& F 140 mm over all length of cover plates floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed. |
| 43 | S&F figured glass 4mm thick, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane (any thickness, size, quality or description ) to wooden/aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified |
| 44 | S&F Sheet glass 5.5mm thick, plain ordinary quality & glazing with oil putty in square not exc 0.5 sq.m in each pane fixing to aluminium frame work (any thickness, size, quality or description ) from Aluminium section fixed with beads/glazing clips including hacking out complete all as specified and directed. |
| 45 | M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintle hinges; large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way & three way straps,plate washers & similar small articles conforming to Fe290-0 Gde E-165 complete all as specified and as directed. |
| 46 | S&F Butt hinges, 100mm size medium weight cold rolled mild steel Etc. complete all as specified and directed. |
| 47 | S&F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and as directed. |
| 48 | S&F aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and as directed. |
| 49 | S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and as directed. |
| 50 | S&F aluminium alloy anodised sliding door bolts 300mm long with hasp, staple (bolt type)and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed. |
| 51 | S & F in repairs Aluminium (Die cast ) body door closer hydraulically regulated, designation No.2 universal type, suitable for door shutters up to 701mm to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed. |
| 52 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 53 | M & L for Hardcore of Broken stone/boulders of gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed. |
| 54 | M&L PCC 1:3:6, type C1, 75mm thick (using 20mm graded stone aggregate) as in plinth protection path etc. finished even and smooth with out using extra cement complete all as specified and as directed. |
| 55 | Dismantling floor hearth or wall tiling including cement mortar bedding(but not backing) and rubbish off the premises complete all as specified and as directed. |
| 56 | Material and Labour for 75 mm thick plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in sub-bases of floor complete all as specified and directed. |
| 57 | M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed. |
| 58 | M & L for glazed ceramic coloured tiles in vertical surface 300x250x7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including Rendering 10mm thick in CM 1:4 for receiving wall tiles on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed. |
| 59 | M&L for Vitrified Ceramic light coloured tiles of 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm and not exceeding 0.42 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 60 | Ditto all as item No. 59 above but on vertical surfaces such as skirting, dados and risers to step etc.but providing 10mm rendering on wall in CM 1:3 complete all as specified and as directed. |
| 61 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded & pointed in any mortar and disposal off outside defence land complete all as specified and as directed. |
| 62 | M&L 75mm thick PCC type B-2, (1:2:4) using 40mm graded stone aggregate as in sub base of floors etc, complete all as specified and as directed. |
| 63 | M&L Machine cut kota stone slab flooring 18-22mm thick over 15mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and as directed. Note: Tread of the staircase has to be provided with one stone) |
| 64 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over 15mm thick plater in CM (1:3) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and as directed. |
| 65 | M&L for machine pressed precast concrete interlocking paver block any shape and size onforming to IS 15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed |
| 66 | M & L for sand cushioning / filling under floors or in foundations incl watering and consolidation complete all as specified and directed |
| 67 | M&L Filleting in any position and to any shape in cement mortar 1:4 complete all as specified and as directed. |
| 68 | Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including taking up or down in the existing pipe line any type and any size completely all as specified for following pipes :-(a) 20mm outer dia bore |
| 69 | Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including taking up or down in the existing pipe line any type and any size completely all as specified for following pipes :-(a) 25mm outer dia bore |
| 70 | Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including taking up or down in the existing pipe line any type and any size completely all as specified for following pipes :-(a) 32mm outer dia bore |
| 71 | M & L for Cutting chases in brick walls , pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduitwiring, etc. and making good, cutting not exceeding 10cm girth complete all as specified and as directed. |
| 72 | S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs including dismantling of existing tank of any description and S&F 25 mm ball PTMT Ball valve high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed. |
| 73 | M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 32mm dia bore pipes complete all as specified and as directed. |
| 74 | M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 25mm dia bore pipes complete all as specified and as directed. |
| 75 | S & F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints fixed to walls /floor as in spouts etc complete including dismantling existing pipes complete all as specified and as directed. |
| 76 | S & F PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls /floor as in spouts etc complete including dismantling existing pipes complete all as specified and as directed. |
| 77 | S & F PVC (SWR) bends 75 mm bore any radius complete all as specified and directed. |
| 78 | S & F PVC (SWR) bends 110 mm bore any radius complete all as specified and directed. |
| 79 | Returning filling in foundation including levelling watering and well ramming in layers not exc 25cm using excavated soil all as directed. |
| 80 | Removing excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point and all as directed. |
| 81 | M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick im CM 1:6 and 5 mm thick in CM 1:4 mixed with water proofing compound as per manufacturers instruction & finished the surfaces even and fair complete all as specified and directed. |
| 82 | S & F in repairs Vitreous china wash down water closet (pedestal pattern ) white (ETWC) and fixed including Plastic seat cover, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device complete all as specified |
| 83 | S & F vitreous china wash down water closet, white, squatting pan Orissa pattern of size 630x450mm with integral foot rest including making necessary connections to soil pipes and flushing cistern, fixed as in repairs complete all as specified and as directed. |
| 84 | S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe, etc.and connected to water closet as per manufacturer's instruction and as directed by the Engineer in charge |
| 85 | M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15 mm thick backing coat cement mortar (1 : 4) including pointing ,moulding the edges in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 86 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 87 | S&F in repairs vitreous china wash basin of oval type including counter top granite platform , waste coupling, waste pipe and brackets etc complete all as specified and as directed. |
| 88 | S&F in repairs PVC waste pipe for wash hand basin/ Urinal (size 40mm dia and 900mm length) complete all as specified and as directed. |
| 89 | S&F in repairs for two way bib tap 15 mm bore chromium plated with crutch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union of make Jaquar or its techno commercial equivalent in other makes complete all as specified and directed. |
| 90 | S&F 15mm dia pillar taps, cast copper alloy with capstan heads, chromium plated fancy type, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes fixed in repairs complete all as specified and as directed. |
| 91 | S&F 15mm dia Bib taps cast copper alloy, fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed in repairs OF Make Jaquar / Prayag as decided by Engineer-in-Charge complete all as specified and as directed. |
| 92 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 93 | S&F in repairs soap dish, matt finished chromium plated (MCH/Colour CP)of make that shall match with existing fitting i.e., jaquar or its techno commercial equivalent in other makes complete all as specified and directed. |
| 94 | S&F in repairs 15mm dia Brass Angle stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 95 | S&F in repairs Chromium plated brass shower rose125 mm including fixing to steel pipe or union complete all as specified and as directed |
| 96 | Supply and fix in repair PVC connections 15 mm size with two brass nuts of length 450 mm complete all as specified and as directed |
| 97 | S&F in repairs 600x450 bevelled edged looking mirror 6mm thick of selected quality glass, mounted on 6 mm thick commercial plywood and with aluminium frame work fitted with chromium plated brass screws and cup washers including taking old one complete all as specified and as directed. |
| 98 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and as directed. |
| 99 | S&F in repair 20mm dia Tubular towel rail 600mm long between flanges 'D' type brass chromium plated, fixed to wall with brass screws and wooden/plastic cleats complete all as specified and as directed. |
| 100 | S&F Corner Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gm) including taking down old one complete all as specified and as directed. |
| 101 | M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed. |
| 102 | S&F in repairs 20mm dia mild steel CP curtain rod with brackets, stops rollers etc complete all as specified and as directed. |
| 103 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, includingcover fillets complete all as specified and directed. |
| 104 | M & L for galvanised powder coated snap grid framework of size 605 x 605mm for false ceiling all as specified including vinyl laminated MPL gypsum panels ( GYPTECH) 9mm thick of size 60 x 60 cm fixing with staples on snap grid by means of GI wires not less than 4mm dia hooks and raw plug etc centre of make. GYPTECH /ARMSTRONG or equivalent complete all as specified and directed. |
| 105 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 106 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 107 | M & L for Complete removal of existing roof treatment any type and demolition of cement concrete padding at roof slab n exc 15cm thickness all specified and directed by Engr-in-Charge |
| 108 | M & L for plain cement concrete in roof kerbs or mud stops, rounded or chamfered on edges as roof padding type B0, 1:2:4 (12.5mm graded aggregate) finished fair and even over concrete surface on roof top, and finished even and smooth complete all as specified and directed. |
| 109 | M&L for10mm thick cement plaster in CM 1:3 mixed with WPC @ 200 ml per bag, when the concrete is green all as per manufacturer instructions ( Note: Water proofing compound will be measured and paid seperately) |
| 110 | Supply only Liquid water proofing compoud |
| 111 | Cleaning and preparation of newly plastered roof surfaces and applying the water proofing treatment as under.(a) Applying 1st course of bituminious (oil based) primer confirming to IS-3384 @ 0.4 lit/sqm over the screed bed.(b) Applying 2nd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 0 C and applied @ 1.2 kg/sqm.(c) Applying 3rd course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap by forced / torch application as per manufacturer's instructions. (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane, (e) Applying 5th course of a one coat of solar reflective aluminium paint @ 0.10 Litre/Sqm on roof surfaces complete all as specified and directed. |
| 112 | Taking down of existing cement or cement lime plaster alongwith the existing water proofing treatment on walls and applying 10 mm thick cement plaster 1:3 mixed with liquid Water Proofing Compound. ( Note: Water proofing compound will be paid and measured seperately) |
| 113 | Cleaning and preparation of newly plastered wall surfaces and applying the water proofing treatment as under. (a) Applying 1st course of bituminious (oil based) primer confirming to IS-3384 @ 0.4 lit/sqm over the plastered surfaces.(b) Applying 2nd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree Celsius and applied @ 1.2 kg/sqm.(c) Applying 3rd course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap by forced / torch application as per manufacturer's instructions. (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane (e) Applying 5th course of one coat of solar reflective aluminium paint @ 0.10 Litre/Sqm on wall surfaces complete all as specified and directed. |
| 114 | M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick im CM 1:6 and 5 mm thick in CM 1:4 mixed with water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. note : WPC WILL BE MEASURED AND PAID SEPERATELY |
| 115 | M & L for preparation of newly plastered wall surfaces and applying two coat of oil bound distemper over a coat of chalk whitening primer etc., complete all as specified and as directed. |
| 116 | M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed. |
| 117 | M&L 25mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in sub base of floors etc, complete all as specified and as directed. |
| 118 | S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs including dismantling of existing tank of any description and S&F 25 mm ball PTMT Ball valve high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed. |
| 119 | S&F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe & waste pipe) but including connections to flushing pipe and outgoing pipes , urinal spreader complete all as specified and as directed. |
| 120 | S&F in repair PVC(SWR) P Trap suitable for 110mm bore complete all as specified and as directed. |
| 121 | S & F in repairs PVC (SWR) bends 110 mm bore any radius with oval access door complete all as specified and directed. |
| 122 | S & F PVC (SWR) junction single (single T ) equal or un equal with access door 110 mm fixed in repairs complete all as specified and directed. |
| 123 | S & F in repair (SWR) vent cowl suitable for 110 mm bore pipe complete all as specified and as directed. |
| 124 | S & F in repairs PVC (SWR) bends 75 mm bore any radius with oval access door complete all as specified and directed. |
| 125 | S & F PVC (SWR) junction single (single T ) equal or un equal with access door 75 mm fixed in repairs complete all as specified and directed. |
| 126 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia outlet fixed in repair complete all as specified and as directed. |
| 127 | S&F in repairs 15mm Brass CP Wall mixer fancy type 2-in-1 system for mixing hot and cold water with provision for over head shower and of make that shall match with existing fitting i.e, Prayag complete all as specified and as directed. |
| 128 | Supply and Fix in repairs health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated as per Make Prayag all as specified and as directed. |
| 129 | S&F in repairs for two way bib tap 15 mm bore chromium plated with crutch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union of make Prayag or its techno commercial equivalent in other makes complete all as specified and directed. |
| 130 | S&F 15mm dia concealed Brass Angle stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed in repairs of make Prayag Cat No 6510 complete all as specified and directed. |
| 131 | M & L for precast cement concrete in man hole cover slab, chullah hoods, chajjas, platforms etc using type B1 concrete mix 1:2:4 with 20 mm graded aggregate and set in cement mortar 1:4 complete including demolition of existing cover slab all as specified and as directed.Note : Reinforcement will be measured and paid separately |
| 132 | M/L 10mm dia and over TMT bars as in reinforcement cut to length bent to shape required including cranking hooking ends and binding with mild steel wire( annealed) not less than 0.9 mm dia (or) securing with clips complete all as specified and as directed. |
| 133 | Excavation in trenches n. exc 1.5m wide and n. exc 1.5m deep for foundation, or for shafts, wells, cesspits, manholes, pier holes etc, n. exc 10 sqm on plan getting soft/loose soil complete all as specified and as directed. |
| 134 | S & F 150 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors including taking down old one and necessary earth work complete all as specified and as directed. |
| 135 | M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in for 150 mm dia pipe line and set in cement mortar complete all as specified and as directed. |
| 136 | Material and Labour Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. |
| 137 | M&L PCC 1:3:6, type C2, 100mm thick (using 40mm graded stone aggregate) as in plinth protection path etc. finished even and smooth with out using extra cement complete all as specified and as directed. |
| 138 | M&L 100mm thick PCC type B-2, (1:2:4) using 40mm graded stone aggregate as in sub base of floors , path etc finished even and smooth without using extra cement complete all as specified and as directed. |
| 139 | M & L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, leveland curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 140 | M&L for Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors and pointed with grey cement and with pigment and laid over and including for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes built in cement plaster 1:6 complete all as specified and specified. |
| 141 | Material and Labour for 75 mm thick plain cement concrete (1:5:10) type E2 using 40mm graded stone aggregate as in sub-bases of floor complete all as specified and directed. |
| 142 | S&F in repair PVC(SWR) S Trap suitable for 110mm bore complete all as specified and as directed. |
| 143 | Cutting into existing manholes for connecting new drains 150mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed. |
| 144 | Excavation over areas n. exc 1.5m deep for foundation, or for shafts, wells, cesspits, manholes, pier holes etc, getting out in soft/loose soil complete all as specified and as directed. |
| 145 | Excavation over areas exc 1.5m and not exceeding 3.00m deep for foundation, or for shafts, wells, cesspits, manholes, pier holes etc, getting out in soft/loose soil complete all as specified and as directed. |
| 146 | Removing excavated soil to a distance exc 250m and not exceeding 500m and depositing where directed at a level n.exc 1.50m above the starting point and all as directed. |
| 147 | M&L for cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 148 | M&L for reinforced cement concrete design mix M-30 using 20mm graded aggregates for rafts,footings ,foundation beams , plinth beams,base for columns etc and mass concrete complete all as specifed and directed. |
| 149 | M&L for reinforced cement concrete design mix M-30 using 20mm graded aggregates as in columns, pillars, piers, post and struts complete all as specified and directed. |
| 150 | M&L for reinforced cement concrete design mix M-30 using 20mm graded aggregates in slab supported on walls, beams and colums in floors,roofs ,landing ,balconies,canopies,deck slabs and in shelves and the like complete all as specified and directed. |
| 151 | Use and waste of formwork to sides of concrete foundations, footing ,bases of columns, raft and raft beams, sides and soffits if any of foundation and plinth beams and similar work; vertical to batter make rough finished surfaces complete all as specifed and as directed. |
| 152 | Use and waste of formwork to suspended slabs such as roof slabs, floor slabs, floor slabs landings and similar work; not exceeding 200mm thick; make rough finished surfaces complete all as specifed and as directed. |
| 153 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar work; make rough finished surfaces complete all as specifed and as directed. |
| 154 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floors and roofs n exc 20cm wide sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed. |
| 155 | M & L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacer and binder complete all as specifed and as directed. |
| 156 | M & L for applying three coat of white wash as in walls incl preparation of newly plastered wall surfaces all as specified and as directed. |
| 157 | Material and Labour for 100 mm thick plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in sub-bases of floor complete all as specified and directed. |
| 158 | M & L Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and as directed. |
| 159 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 160 | S&F Butt hinges, 125mm size heavy weight cold rolled mild steel Etc. complete all as specified and directed. |
| 161 | S & F Aluminium (Die cast ) body door closer hydraulically regulated, designation No.2 universal type, suitable for door shutters up to 701mm to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed. |
| 162 | Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings completely all as specified for following pipes :-(a) 20mm outer dia bore |
| 163 | Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings completely all as specified for following pipes :-(a) 25mm outer dia bore |
| 164 | Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings completely all as specified for following pipes :-(a) 32mm outer dia bore |
| 165 | S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs and S&F 25 mm ball PTMT Ball valve high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed. |
| 166 | M & L Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 32mm dia bore pipes complete all as specified and as directed. |
| 167 | M & L Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 25mm dia bore pipes complete all as specified and as directed. |
| 168 | S & F Vitreous china wash down water closet (pedestal pattern ) white (ETWC) and fixed including Plastic seat cover, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device complete all as specified |
| 169 | S&F PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe, etc.and connected to water closet as per manufacturer's instruction and as directed by the Engineer in charge |
| 170 | S&F two way bib tap 15 mm bore chromium plated with crutch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union of make Jaquar or its techno commercial equivalent in other makes complete all as specified and directed. |
| 171 | Supply and Fix health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated as per Cat No. ALD -563 of Make Jaguar all as specified and as directed. |
| 172 | Supply and fix PVC connections 15 mm size with two brass nuts of length 450 mm complete all as specified and as directed |
| 173 | S&F Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe & waste pipe) but including connections to flushing pipe and outgoing pipes , urinal spreader complete all as specified and as directed. |
| 174 | S&F vitreous china wash basin of oval type including counter top granite platform , waste coupling, waste pipe and brackets etc complete all as specified and as directed. |
| 175 | S&F 600x450 bevelled edged looking mirror 6mm thick of selected quality glass, mounted on 6 mm thick commercial plywood and with aluminium frame work fitted with chromium plated brass screws and cup washers including taking old one complete all as specified and as directed. |
| 176 | S & F 15 mm dia bore pillar tap long neck with aerator fancy type cast copper alloy with crutch handle screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe or for brass ferrule etc complete of make that shall match with existing fitting i.e, jaquar Cat Part No. CON-021 complete all as specified and as directed. |
| 177 | S&F angular stop cock 15 mm dia brass chromium plated fancy type with long shank, screwed down high pressure with crutch or butter fly handle screwed down both ends for iron pipe or for union of make that shall match with existing fitting i.e, jaquar Cat Part No. 053KN complete all as specified and as directed. |
| 178 | S&F 15mm dia Bib taps cast copper alloy, fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule of make Jaquar Cat Part No. CON - 037KN or its techno commercial equivalent in other makes complete all as specified and directed. |
| 179 | S&F toilet paper holder with flat recessed type matt chromium plated of make that shall match with existing fitting i.e, jaquar Cat Part No. 1153 complete all as specified and as directed. |
| 180 | S&F Chromium plated brass shower rose125 mm including fixing to steel pipe or union complete all as specified and as directed |
| 181 | S&F 20mm dia Tubular towel rail 600mm long between flanges 'D' type brass chromium plated, fixed to wall with brass screws and wooden/plastic cleats complete all as specified and as directed. |
| 182 | S&F Corner Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gm) complete all as specified and as directed. |
| 183 | S & F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints fixed to walls /floor as in spouts etc complete complete all as specified and as directed. |
| 184 | S&F PVC(SWR) P Trap suitable for 110mm bore complete all as specified and as directed. |
| 185 | S&F soap dish, matt finished chromium plated (MCH/Colour CP)of make that shall match with existing fitting i.e., jaquar or its techno commercial equivalent in other makes complete all as specified and directed. |
| 186 | S & F PVC (SWR) bends 110 mm bore any radius with oval access door complete all as specified and directed. |
| 187 | S & F PVC (SWR) junction single (single T ) equal or un equal with access door 110 mm complete all as specified and directed. |
| 188 | S & F (SWR) vent cowl suitable for 110 mm bore pipe complete all as specified and as directed. |
| 189 | S & F PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls /floor as in spouts etc complete all as specified and as directed. |
| 190 | S & F 150 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors and necessary earth work complete all as specified and as directed. |
| 191 | S & F PVC (SWR) bends 75 mm bore any radius with oval access door complete all as specified and directed. |
| 192 | S & F PVC (SWR) junction single (single T ) equal or un equal with access door 75 mm complete all as specified and directed. |
| 193 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and as directed. |
| 194 | S&F PVC waste pipe for wash hand basin/ Urinal (size 40mm x 900mm length) complete all as specified and as directed. |
| 195 | M&L for point wiring using approved colour coding as per IS, with stranded copper conductor of size 1.5 sqmm(nominal area), single core, with PVC insulated unsheathed stranded copper conductor cable of 1100V grade (FRLSH), ISI- 694 marked drawn through in and including new non metallic heavy duty rigid PVC conduit 20mm bore including accessories, concealed in wall/floor and fixed on ceiling/roof etc., after cutting, chasing the wall etc and making good the disturbed surface including pressed steel modular sunken boxes of suitable size with minimum thickness 2mm duly concealed in walls for housing of modular switches, switch socket outlets, fan regulators etc., incl provn of 1.5 sqmm(nominal area) (FRLSH) PVC insulated copper earth conductor cable single core, for earth continuity and connecting to common earth dolly incl taking down carefully old copper/aluminium point wiring light, fan, socket or power complete with fittings such as switches, ceiling roses, regulators sockets etc and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed for one light point controlled by one switch |
| 196 | one fan point controlled by one switch |
| 197 | one 3 pin socket outlet 5 amps on the same board controlled by one switch. |
| 198 | one 3 pin socket outlet 5 amps on independent board controlled by one switch. |
| 199 | As per above item No 195 above but for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed. |
| 200 | All as per item No 195 above for one 3 pin socket outlet , 15 amps control by one switch independent board with cable 4.0 sqmm size complete all as specified and directed. |
| 201 | M&L for point wiring using approved colour coding as per IS, with stranded copper conductor of size 1.5 sqmm(nominal area), single core, with PVC insulated unsheathed stranded copper conductor cable of 1100V grade (FRLSH), ISI- 694 marked drawn through in and including new non metallic heavy duty rigid PVC conduit 20mm bore including accessories, concealed in wall/floor and fixed on ceiling/roof etc., after cutting, chasing the wall etc and making good the disturbed surface including pressed steel modular sunken boxes of suitable size with minimum thickness 2mm duly concealed in walls for housing of modular switches, switch socket outlets, fan regulators etc., incl provn of 1.5 sqmm(nominal area) (FRLSH) PVC insulated copper earth conductor cable single core, for earth continuity and connecting to common earth dolly complete all as specified and as directed for one light point controlled by one switch |
| 202 | one fan point controlled by one switch |
| 203 | one 3 pin socket outlet 5 amps on the same board controlled by one switch. |
| 204 | one 3 pin socket outlet 5 amps on independent board controlled by one switch. |
| 205 | All as per above item No 198 above but for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and as directed. |
| 206 | S& F for modular cover plate with frame 3 module complete all as specified and as directed. |
| 207 | S& F for modular cover plate with frame 4 module complete all as specified and as directed. |
| 208 | S& F for modular cover plate with frame 6 module complete all as specified and as directed. |
| 209 | S&F modular switches suitable for type AC 240V, 6 amps 1 module complete all as specified and as directed. |
| 210 | S&F modular sockets suitable for type AC 240V, 6 amps 2 module complete all as specified and as directed. |
| 211 | S&F modular switches suitable for type AC 240V, 16 amps 1 module complete all as specified and as directed. |
| 212 | S&F modular power sockets suitable for type AC 240V, 16 amps 2 module complete all as specified and as directed. |
| 213 | S&F modular fan regulator suitable for type AC 240V, 2 module complete all as specified and as directed. |
| 214 | S&F ceiling rose , polycarbonate, isolated body with 2 to 3 terminals complete all as specified and as directed. |
| 215 | Taking down ceiling fan and exhaust fans of any size and any description including connected accessories and deposited in AGE E/M store complete all as specified and as directed. |
| 216 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Five star rated with brushless direct current motor, complete all as specified and directed. |
| 217 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep heavy duty with blades, and frame and louvers, complete all as specified and as directed. |
| 218 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with blades, and frame and louvers, complete all as specified and as directed. |
| 219 | S & F 20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminium housing with wide range of wattages ,incl taking down unserviceable fittings of any size and capacity complete and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed. Make : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or techno commercial equivalent in Philips /Bajaj. |
| 220 | S & F 20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminium housing with wide range of wattages complete all as specified and as directed. Make : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or techno commercial equivalent in Philips /Bajaj. |
| 221 | S & F 36 Watts 2x2 ceiling COOL LIGHT a veratile 2X2 recess mounted luminaires which suits various ceiling types with option to add mounting kits for POP ceiling & suspension clamp for pendant mounting from true ceiling, incl taking down unserviceable fittings of any size and capacity complete and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed. Make Havells Cat No. VENUSNEO2X2PLR36WLED865G2 or equivalent to Philips/Bajaj. |
| 222 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc and deposited in AGE E/M store complete all as specified and directed |
| 223 | M & L for Sub main wiring complete with two runs of FRLSH 4 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metallic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling with one run of 4 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor including taking down complete all as specified and directed. Note:- Two runs of PVC insulated cable 4 sqmm + one run 4 sqmm of earth wire and one run of conduit including accessories shall be measured as one length. |
| 224 | S&F sub main wiring complete with two runs of FRLSH 6 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metallic rigid PVC conduit pipe concealed in wall along with accessories fixed on walls/floors/ceiling with one run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor incl taking down sub main wiring any type and any size complete after properly disconnecting electric supply properly and making good surface complete all as specified and directed. Note:- Two runs of PVC insulated cable 6 sqmm + one run 6 sqmm of earth wire and one run of conduit including accessories shall be measured as one length. |
| 225 | S&F sub main wiring complete with four runs of FRLSH 16 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metallic rigid PVC conduit pipe concealed in wall along with accessories fixed on walls/floors/ceiling with one run of 16 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor incl taking down sub main wiring any type and any size complete after properly disconnecting electric supply properly and making good surface complete all as specified and directed. Note:- Four runs of PVC insulated cable 16 sqmm + one run 16 sqmm of earth wire and one run of conduit including accessories shall be measured as one length. |
| 226 | S&F sub main wiring complete with two runs of FRLSH 6 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metallic rigid PVC conduit pipe concealed in wall along with accessories fixed on walls/floors/ceiling with one run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor complete all as specified and directed. Note:- Two runs of PVC insulated cable 6 sqmm + one run 6 sqmm of earth wire and one run of conduit including accessories shall be measured as one length. |
| 227 | S&F MCB distribution board made of CRCA sheet, powder coated paint conforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volt 6 way MCB DB, TPN with 200 Amp rated bus bar shall conform to IP 38 protection incl taking down old MCB DB any type and any size complete after properly disconnecting electric supply properly and making good surface complete all as specified and directed. |
| 228 | S&F MCB distribution board made of CRCA sheet, powder coated paint conforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 240volt 8 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection incl taking down old MCB DB any type and any size complete after properly disconnecting electric supply properly and making good surface complete all as specified and directed. |
| 229 | S&F MCB distribution board made of CRCA sheet, powder coated paint conforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 240volt 8 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection complete all as specified and directed. |
| 230 | S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volt 12 way MCB DB, SPN with 200 Amp rated bus bar conforming to IP 38 protection including taking down old ones complete all as specified and directed. |
| 231 | S&F MCB TPN 100 Amps 415 Volts incl taking down old MCB any type and any size complete after properly disconnecting electric supply properly and making good surface complete all as specified and directed. |
| 232 | S&F MCB of SPN 40 Amps 240 Volts incl taking down old MCB any type and any size complete after properly disconnecting electric supply properly and making good surface complete all as specified and directed. |
| 233 | S&F MCB of SPN 63 Amps 240 Volts incl taking down old MCB any type and any size complete after properly disconnecting electric supply properly and making good surface complete all as specified and directed. |
| 234 | S&F MCB of SPN 32 Amps 240 Volts complete after properly disconnecting electric supply properly and making good surface complete all as specified and directed. |
| 235 | S&F MCB of SP 40 Amps 240 Volts incl taking down old MCB any type and any size complete after properly disconnecting electric supply properly and making good surface complete all as specified and directed. |
| 236 | S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts incl taking down old MCB of any type and any size complete after properly disconnecting electric supply properly and making good surface complete all as specified and directed. |
| 237 | S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts complete all as specified and directed. |
| 238 | Taking down AC box any type and any size complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed |
| 239 | S&F MCB Power unit with 4 module steel box consisting of 3 pin 24 Amps socket with Plug top and MCB SP 20 Amps, suitable for operation of AC & Geysers etc., (Make :- Havells/Legrand/Anchor) |
| 240 | Earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4 mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15 mm bore light grade connected upto switch board incl 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No.3 of SSR Part I including dearth chamber of PCC 1:2:4 type B1 using 20mm grade aggregate with RCC cover slab 1:2:4 type B1, 40mm thick with 15mm dia MS bar 100mm C/C both ways and 6 MM dia MS hooks including testing on completion and taking down complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 days
Oct 10, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender