Tender For Repair To Gates, Open Drains, Path, Hard Standing, Mh And Gt Covers, Reinforced Cement Concrete Jallies At Anuj Nayyar Vihar And Polo Road Messes (Garuda, Asc, Iml, Aad), Sw Comd Hut, S Comd Hut In The Area Of Age B/R-Ii Under Ge (East) De
Tender Value
48 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
9 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Gates, Open Drains, Path, Hard Standing, Mh And Gt Covers, Reinforced Cement Concrete Jallies At Anuj Nayyar Vihar And Polo Road Messes (Garuda, Asc, Iml, Aad), Sw Comd Hut, S Comd Hut In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of New/old decoreated external wall /Ceiling surface of existing treatment by scrapping with TruCare Wall Sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7”/9” to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying two coats of weather proofing exterior acrylic emulsion paint over priming coat premium quality over wall/ceiling complete all as specified and as directed by Engr-in-charge. (Make : BERGER (WEATHER COAT ALL GUARD), ASIAN (APEX ULTIMA), NEROLAC (EXCEL TOTAL) BIRLA (OPUS PRIME E70)) |
| 2 | M&L for applying of 1 mm thick wall care putty over prepared surfaces of new/old walls/ceiling including sanding of putty surface properly with regmar to make the surface free from dust or loose particles, complete all as specified and as directed by Engr-in-Charge. |
| 3 | M&L for preparation of old decoreated external wall surface by mechanised sander of Berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying two coats of cement base paint over coat of primer on walls complete all as specified and as directed by Engr-in-charge. |
| 4 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 5 | M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:6, complete all as specified and directed. |
| 6 | Taking down grit/cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed. |
| 7 | M&L for rendering 15 mm thick in cement mortor 1:4 on brick/ concrete surfaces and finishing the surface even and fair without using extra cement complete all as specified directed. |
| 8 | M&L for prepration of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of Primer complete all as specified and directed . |
| 9 | M&L for Grit wash on stone wall or brick surfaces of walls including raking out joints, hacking for key and scrubbing down with water complete and M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement 1/2 coarse sand and 2 stone chipping 10mm nominal size) in pannels wih grooves all aroud as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chipping complete all as specified and directed. |
| 10 | M&L for 10-12mm thick polymer modified readymix cement base plaster as per manufacturer instruction on fair/unfair faces of brick work or concrete surfaces & finishing the surface even & smooth as per manufacturer instruction complete all as specified & directed. |
| 11 | M&L for prepration of new/Old plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ Old surfaces, complete all as specified and directed. |
| 12 | S&F in repair/replace factory made steel fibre reinforced (SFRC) Drain covers without frames incl necessary hold fast/hooks of (Heavy duty) 600x450x70mm rectangular complete all as specified. Make Kreative concrete Company Product Code DC - 01 and equivelent. |
| 13 | S&F factory made steel fibre reinforced (SFRC) man holes covers with frames incl necessary hold fast/hooks (medium duty) of 600 mm dia or rectangular of equivalent area complete all as specified and as directed. |
| 14 | Description all as per item No 13 above but without frame. |
| 15 | S&F factory made steel fibre reinforced (SFRC) man holes covers with frames incl necessary hold fast/hooks (medium duty) of 900x450x70 to 75mm thick rectangular area complete all as specified and as directed. |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 17 | M&L for Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. of Gde Fe-290, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed. |
| 18 | S&F 1.00 mm thick plain black steel sheet in hearths; covering to door shutters; covering to doorchowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc. with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required incl priming complete all as specified and directed. |
| 19 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed. |
| 20 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved having tensile strength of 550 MPA as in roof covering/cladding to wall as view cutter, fixed with self tapping screws as specified and including cutting chasing of wall, complete all as specified and directed. |
| 21 | Excavating in any type of soil in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface. |
| 22 | S&F in repair RCC Precast Concrete Post (M-30) of size 150mm X 150mm X 2435mm height having two grooves of size 50 X 30mm, so as to receive 6 Nos. including Provn of 6 Nos of Precast concrete RCC Panels between Two post of size 1500mm X 300mm X 40mm thickness. The post is reinforced with 4 Nos. 8mm dia Tor Bars with 4mm dia stir-ups @ 1.615m centre to centre150mm c/c; Panels are reinforced with 3 Nos. longituddinasl bar of 8mm dia Tor steel & 6mm plain M.S Stir ups @ 150mm c/c. Manufactured by M-30 graded of concretes complete all as specifed and as directed. Note :- (a) Above ground level height will be measured for payment purpose. (b) Excavation of post holes for fixing of Columns shall be measured and paid seprately. (c) The post may be fixed to the ground by digging a hole of 500 x500 x600mm and filled with 1:3:6 concrete after the post has been aligned in these holes.The post will be erected @ 1.615 m center to center. Make- Kreative concrete company or equivalent as approved by GE. |
| 23 | Dismantling of old RCC jalli & S&F 18mm solid WPC (Wood polymer Composite) jali with frame fixing on wall or wall cladding, combining WPC board with frame of wpc, 100% Solid WPC Jali of required length and width, comprising of virgin PVC resin of K Value 58-60 (Suspension Grade), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from single Extrusion process, WPC foam board with having minimum density 600 kg/cbm and WPC frame with having minimum density 650 kg/cbm manufactured as per an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compissive of 50 N/mm2,Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. For WPC Railing WPC Jali to be fixed with wpc frame of size 75x45mm with necessary supporting lengths at verticle as well as horizontal. At wall frames to be fixed with 100x8 fastners to support vetically frame lengths including all fixing assecerories, moulding, corner beads complete all as specified and as directed by Engr-in-Charge. |
| 24 | M&L in repair for providing precast cement concrete louvers and jallies, 35 mm thick type B0 1:2:4 (using 12.5mm graded stone aggregate) (measured solid) including all moulding and necessary form work and set in cement mortar 1:4 fixed in repairs complete all as specifed and as directed. |
| 25 | S&F Precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed. |
| 26 | Demolition in cement concrete of cement concrete in ground floor and paving not exc. 15 cm thick below or above ground level complete all as specified and as directed. |
| 27 | M&L 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in Sub base to receve floor finishes etc complete all as specified and directed. |
| 28 | M&L for Rubber moulded PU coated Chequered cement concrete tiles 300mmx300mmx 25mm thick, set, jointed with grey cement and pigments and pointed in neat cement slurry icluding screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finished complete all as specified and directed. |
| 29 | M&L 100mm thick Cement concrete type D-2,1:4:8 (using 40 mm graded stone aggregate) graded stone aggregate in sub base of floor complete all as specified and directed by Engr-in-Charge. |
| 30 | S&F Machine pressed precast concrete interlocking glazed paver block with grey/colour cement and pigment of any shape and size conforming to IS 15658-2006 of 60 mm thickness and M-35 grade including 50 mm sand cushion including packing joints etc complete all as specified and directed. |
| 31 | M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping and similar works including necessary form work complete all as specified. |
| 32 | M&L for providing cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in MH, drain, channels, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified . |
| 33 | M&L for 100mm thick Ready Mixed Cement Concrete ( M-25) as stamp concerting in floors, sub base, base etc & preparing a concrete floor with a textured, imprinted finish to resemble natural materials like stone or brick. The process includes preparing a base, pouring concrete, applying color hardener, and using release agents and stamps to create the desired pattern. Finally, the surface is sealed for protection and enhanced color including formwork to edges of concrete flats, breaks in floors, openings in concrete floors, horizontal or sloping complete all as specified and directed by Engr-in-charge. |
| 34 | M&L for pre cast Kerb stone with plain fair faces 300mmx300mmx100 mm or any size (as per site requirements) of PCC 1:1½ :3 of shape as approved jointed in 1:6 cement mortar incl all excavation, embedding in ground and removing surplus spoil upto 500 Mtr distance completed all as specified and as directed by Engr-in-Charge. |
| 35 | M&L for hard core using broken stone or boulders of gauge not exc 63mm, deposited, spread, levelled, watered and well rammed to a true surface, complete all as specified and directed by Engineer-in-Charge. |
| 36 | M&L for Parking tile/Out Door coloured ceramic tiles (desired pattern) 8 to 10 mm thick (square/ rectangular) area of each tiles exceeding 0.09 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over with 15mm thick screed bed in CM 1:6 inculding dismantling of tile complete all as specified. |
| 37 | M&L preparation of new/old steel surface and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 38 | M&L for preparation of new/old stone/concrete surface of any description over 10cm girth or width, not otherwise described and applying two coat of synthetic enamel paints over priming paint plaster complete all as specified and directed. |
| 39 | Disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading and disposal at an approved Municipal dumping ground outside Defence land (MoD land), for all leads and all lifts, complete all as specified and as directed by the Engineer-in-Charge.Notes:1. Photographic Evidence: The contractor shall submit clear photographic evidence in support of disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials, indicating the condition of the site before loading, during transportation and after unloading at the approved Municipal dumping ground. The photographs shall preferably be geo-tagged and date-stamped and shall form part of the record for verification and payment purposes. 2. Certification by Engineer-in-Charge: Completion of whole work in this BOQ shall be deemed to have been achieved only after certification by the Engineer-in-Charge that no building rubbish/malba, similar unserviceable, dismantled or waste materials have been left at the site and that the site has been thoroughly cleared and cleaned to his satisfaction. 3. Each load shall comprise a minimum carrying capacity of 5.00 cubic metres (Cum). Payment under this item shall be made on a per-load basis for loads conforming to the above minimum capacity and duly verified by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender