Tender For special Repair To Roof Treatment Of Boy Cadets Block No 1, 2 And 8, Construction Of Office For So And Other Connected Work And Renovation Of Ship Modeling Hall And Office And Other Connected Work At Dg Ncc C Under Ge (East) Delhi Cantt-10
Tender Value
49.91 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
10 days left
EMD
99840
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Roof Treatment Of Boy Cadets Block No 1, 2 And 8, Construction Of Office For So And Other Connected Work And Renovation Of Ship Modeling Hall And Office And Other Connected Work At Dg Ncc C Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc applying a coat of bituminous primer @ 0.3 ltr per sqm and coat of hot blown VG-20 paving grade (60-80) penetration bitumen applied hot @ 1.2 kg per sqm, blinded with grit or pea size gravel @ 0.006 cum per Sqm and lightly tampered (area of flashings etc., shall be added to the roof area) and applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/Sqm) land on primed surface by forced application complete all as specified |
| 2 | M&L for 40mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in floor, finished even and smooth without using extra cement and using water proofing admixture as per manufacturer instruction, complete all as specified and directed by Engr- in- Charge. |
| 3 | M&L for non skid vitrified ceramic tiles 9-10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.72 sqm, in floors using 2-3mm wide spacers and pointing the gap with epoxy grouting etc. set and jointed in neat cement slurry over and incl 15mm thick screed bedding layer in CM 1:6, complete all as specified and directed |
| 4 | M&L for Mild Steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed. |
| 5 | M & L for Sliding/openable glass door 12mm thick (toughened glass) of approved quality including necessary all stainless steel hardware fittings (As like sliding rail, guide, clips, frame, brackets, clits, jammers, stoppers, locking arrangement etc) door fixed with two No's stainless steel handle on each leaf/door exc 45 cm long 25 mm dia complete drilled for fixing with all fitting and fixture complete all as specified and as directed. |
| 6 | M & L for structural frameless glazing consisting of 12mm thick toughened glass coated with metallic or metallic oxide coating fixed with spider fitting, L- Connecter SS-304, U-channel and other connecting accessary fixed with sealed structural sealant and fixing glass film of approved quality complete all as IS -3548:2013 and as directed by Engr -in- charge. |
| 7 | S & F plain gypsum board panel 12 mm thick on false ceiling (including any design/ cob design as required & pattern as approved by GE) with and including necessary GI frame work for seamless ceiling used with 'T', channel or any section including screws, cleats, fasteners, clips and all required accessories, hangers etc. of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including two coats of OBD over a coat of primer and putty, complete all as specified and directed. |
| 8 | S & F painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 9 | S & F painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 10 | M & L for Stainless Steel work of Grade-304 as in Gates, grills, railing posts (horizontal/ vertical) or any type of other work or in any position, of any type and size including special shaped washers, channels, plates horizontal/ vertical made of hollow tubes or in any other shape as per requirement at site complete all as specified and as directed. |
| 11 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 12 | Demolition of brick work Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles Complete all as specified and directed. |
| 13 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar for 150mm bore pipe |
| 14 | M&L for plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete, Complete all as specified and directed. |
| 15 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6), Complete all as specified and directed. |
| 16 | M&L for PCC (1:2:4) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, complete all as specified and directed by Engr- in- charge. Complete all as specified and directed. |
| 17 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. |
| 18 | M&L Concrete bed to drain pipes laid in trenches incl packing under and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 all as specified and directed for 150mm bore pipe. Complete all as specified and directed. |
| 19 | M&L for salt glazed stone ware (SGSW) grade 'A' drain pipes 150mm bore laid and jointed on concrete bed complete incl testing Complete all as specified and directed. |
| 20 | S & F for factory made precast RCC covers 75 mm thick medium duty conforming to IS-12592 of any shape and size as per requirement at site, complete all as specified and as directed. |
| 21 | Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying cable, etc. not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified. |
| 22 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil. |
| 23 | Removing excavated material exc. 50m but not exc 100m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified. |
| 24 | M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 25 | Machine pressed precast chequered cement concrete tiles grey cement and pigment of size 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and incl 15mm thcik screed bedding laywer in CM 1:6, complete all as specified and as directed. |
| 26 | M&L for MS iron sections incl drilling and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 27 | M & L for Stainless Steel work of Grade-304 as in designer vertical post/pole of any type and size (upto a height of 10 Mtrs and (100mm to 200mm dia) including special shaped washers, channels, plates horizontal/ vertical also ornamental works any type and size as approved by GE and as reqd at site made of hollow tubes or in any other shape as per requirement at site, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary nuts and bolts dash fasteners, stainless steel bolts etc., of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. (Note :- No extra payment shall be made to the contractor for ornamental works of this item). |
| 28 | M&L for PVC solid wall panelling 5 to 8 mm thick any type finish (colour and design as approved by GE) pre-laminated inclusive of fixing on to wall including moulding end caps with L / U beading etc. fixed with PVC sleeves and screws as required at site |
| 29 | Excavation in post holes (or similar holes) each not exec 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in soft/ loose soil, complete all as specified and directed. |
| 30 | M & L for applying two coats of synthetic enamel paint over a coat of primer, any tint on new brick, kerb stone, concrete, asbestos cement or plastered surface exceeding 10cm width or girth including preparation of new surfaces, complete all as specified and as directed. |
| 31 | Roughening surfaces of old brick floor by picking, sweeping clean and washing down with water to remove dust, etc. |
| 32 | M&L for 28 mm wide glass dividing strips, 3 mm thick and inserted in position, conform to design with cement mortar 1:3 |
| 33 | Dismantling of PVC water tanks exc 500 litres but not exc 1000Ltr capacity of any condition or type complete all as specified and directed. |
| 34 | Dismantling of PVC pipe up to 100 mm bore complete all as specified and directed. |
| 35 | Taking up or down 15 mm bore GI tubing and connections including cleaning for re-fixing complete all as specified and directed. |
| 36 | Taking up or down 20 mm bore GI tubing and connections including cleaning for re-fixing complete all as specified and directed. |
| 37 | Taking down cement plaster, terrazzo, grit plaster dado in any thickness from brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. Note : The work will be carried out upto 13m ht from ground level with necessary scaffolding and safety equipment's. |
| 38 | M&L Rendering 15 mm thick in cement mortar 1:4 on fair face of brick work/ concrete surfaces with water proofing admixture finished even and smooth without using extra cement. Note : This and all connected work will be carried out upto 13m hight from ground level with necessary scaffolding and safety equipment's. |
| 39 | Providing and applying the plaster with single component ready to use Polymer modified repair mortar capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat : SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area including taking down existing roof treatment of any type with cement plaster on brick/concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. Make: Smart Care (Asian Paints) or equivalent in Sika/ Fosroc/ Berger/ STP. Note : The application shall be executed on any type of surface and on horizontal/Vertical areas. |
| 40 | Providing and applying Smartcare Damp proof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/Sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. (Make: Smart Care Damp Proof of Asian Paints or equivalent in Berger and Nerolac).Notes: (1) The work shall be executed through authorised applicator of manufacturer only.(2) Authorised Applicator shall be approved by GE before starting of work.(3) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers.(4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer. |
| 41 | Supply only liquid water proofing compound complete all as specified and directed. |
| 42 | S&F 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc. complete all as specified and directed. |
| 43 | Description all as per item No 42.00 above but 20 mm bore. |
| 44 | S&F white colour Rotational moulded polyethylene water storage tank 1000 litres capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed. |
| 45 | S&F in repair Gun-metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron complete all as specified and directed. |
| 46 | S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and directed. |
| 47 | M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including 2mm thick wall care putty complete all as specified and as directed. |
| 48 | S&F in repair 100 mm PVC pipe with all accessories, with stack clamps out of 50mmx 5 mm flat iron and 16 mm dia round iron stamp including bolts and nuts and securing ends of stays to walls @ 1.00m C/C on wall, complete all as specified and directed. |
| 49 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complate all as specified and directed. |
| 50 | M&L 4mm thick designer board false ceiling e-board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instruction, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & size T-24x32 mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 2 mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runner at 600 mm c/c to from 600 x 600 mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19 x19 mm of white colour all as per instruction and including dismantling of walls and celling existing old board (fibre pulp. Insulation etc.) or insulation boards/slabs/blanks any thickness including cover fillets, any type of frame etc complete all as specified and directed. |
| 51 | S&F mild steel rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.complete all as specified and as directed. |
| 52 | M & L for glazed ceramic tiles in vertical surface of size 300mmx450mm or 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick rendering in CM 1:4 after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), complete all as specified and as directed. |
| 53 | M & L for Preparation of old plastered /unplaster surfaces of walls and ceilings by scrapping and applying two coats of Oil Bound Distemper over a coat of primer and 1.5-2 mm thick wall care putty, complete all as specified and directed. |
| 54 | M&L for applying one coat of apex paint on walls including preparation of old untreated surfaces of wall complete all as specified. |
| 55 | M&L for Vitrified light shade tiles 9 to10 mm thick (square/rectangular) area of each tile not less than 0.36 Sqm in floors and skirting etc. set and jointed in neat cement slurry over and incl 15mm thick screed bedding layer in CM 1:6 and pointed in white or coloured cement to match, including dismantling of existing tiles complete all as specified and as directed. |
| 56 | M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) of size 300mmx300mm or 400mmx400mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6, with dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete. |
| 57 | Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches, Sockets, holders, ceiling roses, light fitting regulators etc (to be measured separately) and making good the disturbed surface all as directed. |
| 58 | M&L for point wiring complete with 1.5 Sqmm (nominal area) FRLS-H, PVC insulated un-sheathed and stranded copper conductor cable ISI marked drawing in PVC concealed conduit and PVC conduit fitting including drawing FRLS-H, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size with modular sheet for fixing modular switches/sockets/fan regulator etc for the followings complete all as directed |
| 59 | One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push. |
| 60 | One socket outlet point 5 amps on the same board. |
| 61 | One socket outlet point 5 amps on the independent board. |
| 62 | Description all as per Srl Item No 57.00 here-in-before but with 2.5 sq mm FRLS-H copper wire with 2.5 Sqmm FRLS-H copper earth wire for independent point. |
| 63 | S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed by Engineer-in-Charge white/Black/Browncomplete all as specified and directed. Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 64 | S&F Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed by Engineer-in-Charge white/Black/Browncomplete all as specified and directed.Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 65 | S&F Modular switch 16 Amp, 1 way, 1 module size complete all as directed.by Engineer-in-Charge white/Black/Browncomplete all as specified and directed. Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 66 | S&F Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directedby Engineer-in-Charge white/Black/Browncomplete all as specified and directed.Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 67 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete all as specified and as directed. |
| 68 | S&F of picture light of 12 Watts, 450/600 mm length metal body suitable for focus on Name plates/paintings, complete all as specifed and as directed. |
| 69 | Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make Eveready/ Crompton/ Havell or equivalent. |
| 70 | Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make Eveready/ Crompton/ Havells or equivalent. |
| 71 | S&F in Replacement Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed. |
| 72 | S&F in Replacement Modular Step Fan regulator, 120/70 watts single / double module, fixed in repairs, complete all as specifed and as directed. Make-Indoasian shynora/Legrand Artear/ Havells murano/Gold medal Gifa-X9 or equivalent. |
| 73 | S & F in Replacement of LED batten luminaire surface mounted with aluminium housing & PC diffuser, 4 feet system wattage of 20 watts initial lumen maintained CRI>80, Power Factor >0.9, THD<20%, colour temperature-6500K, surge Protection 2.5 KV in CM, IP-20 protected, meets LED IS specified, Class-1, short circuit and over circuit protection, voltage range -140 to 270 volts AC,temperature range 0 to 50 Degree C,system efficiency at luminaire level >120 Lumen/watts and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 74 | Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 75 | Taking down of ceililng fan any type size complete with blades, fan clamp etc and depositing to MES store yard after dismentling blade complete all as specified and as directed. |
| 76 | S&F BLDC (Brushless Direct Current) Ceiling Fan ( energy efficient), 1200 mm with IR Regulator controlled, opertaing voltage 220V, minimum air delivery 225 cmm class of insulation 'F' having full copper motor winding & ribbed 3 Nos A/M blades making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and directed.The fan shall have BEE 5 star rating and service value more than 7.9. complete all as specified and directed by Engr-in-Charge. |
| 77 | S & F in Replacement of MCB DB conforming to IP 43 - IK 09 with double door, SPN 16 way complete with din rail Neutral and earthing bar after taking out the old unserviceable DBs connection and making good the disturbed surfaces complete all as specified and as directed. |
| 78 | S&F in Replacement of MCB SP, C Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed. |
| 79 | S&F in Replacement of MCB SPN C Curve type, 10 KA,63 Amp, with over load and short circuit protection complete all as directed. |
| 80 | Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed. |
| 81 | S & F in Replacement energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed. Make Eveready/Crompton/Havells or equivalent. |
| 82 | Supply and fixing in Replacement of street light fitting bracket, 1.0 mtr long bent to shape made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed. |
| 83 | Supply, laying and testing UG cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) in replacement 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 core. |
| 84 | Supply and laying of DWC electrical pipe double wall corrugated of size 95x76 mm suitable for laying of electrical cable complete all as specified and directed by Engr-in-charge. |
| 85 | Supply and fixing of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Note:- MCCB & MCBs will be measured and paid separately |
| 86 | S&F MCCB 3 Pole, 100 Amp with breaking capacity 16 KA suitable for 415 volts AC supply, with over load and short circuit protection complete all as specified. |
| 87 | Description all as per Srl Item No 57.00 here-in-before but with 4 sqmm FRLS-H copper wire with 4 Sqmm FRLS-H copper earth wire for independent point. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender