Tender For Repairs And Recanning Work Of Wooden And Steel Chairs Under Ge (Nb) Visakhapatnam
Tender Value
45 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
5 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Recanning Work Of Wooden And Steel Chairs Under Ge (Nb) Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and taking out carefully old Unserviceable/Worn Out/broken components of Wooden/Steel Furniture without damaging the remaining serviceable members, furniture and Supplying and Fixing of the same with new components such as Prelaminated MDF Board, Exterior Grade, One side decorative lamination and other side balancing white conforming to IS – 14857, Plywood BWR Grade conforming to IS – 303, Decorative laminate sheets, Edge Banding & Finishing, Mild Steel Sections, Iron mongery fittings, Glass fixing/fittings, Builders Hardware, Tapestry Cloth, Foam, Upholstery & Diamond Button-Tufting , Plastic Cane, Cotton/Nylon Newar etc.and Wood Work made of 1st Class Hard Wood (Teak Wood), seasoned, free from knots and cracks, wrought finished including tightening the joints, pinning, screwing, nailing, wedging, applying putty, gluing, providing hinges,handles/knobs, polishing/painting the entire article with standard workmanship complete to its original shape and size all as shown on drawings,as specified,as brief description of items and as directed by Engr-in-Charge. All furniture items shall be painted/polished only after completing all repairs and renewals work etc, preparation of steel/iron/wooden surface by removing of old paint/polish by using grinding machine, taking out dents & filling metal putty/wood filler to the uneven surfaces, after thoroughly preparation the surfaces of the furniture articles, then apply spray painting/polishing with two coat of synthetic enamel paint/ melamine polish. The furniture shall be repaired/ renewed, Painted/Polished on site at Officers Married Accommodation after completion of BR/EM Welcome Maintenance works. Work will be executed inside the Barrack Store Yard of GE(NB) Vizag and at various sites as per requirement as directed by Engr-in-Charge without fail. All materials to be incorporated in the work shall conform to the latest IS Specification. Anti-termite and anti-bug treatment shall be done before polishing the wooden furniture. Rate quoted is deemed to be including the same. |
| 2 | M & L for repair to CHAIR DINING (rectengular pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining parts Supply and fixing of new Rear leg (size 30x55x890mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) |
| 3 | M & L for repair to CHAIR DINING (rectengular pattern) by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining parts Supply and fixing of new front leg (size 30x65x460mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) |
| 4 | M & L for repair to CHAIR DINING (rectengular pattern) by taking down/removing the existing broken /unserviceable seat side rail carefully without disturbing the adjoining parts Supply and fixing of new seat side rail (size 30x65x430mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing,drilling of holes @12.5 mm C/C for canning as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) |
| 5 | M & L for repair to CHAIR DINING (rectengular pattern) by taking down/removing the existing broken /unserviceable front rail carefully without disturbing the adjoining parts Supply and fixing of new front rail (size 30x65x440mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing,drilling of holes @12.5 mm C/C for canning as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) |
| 6 | M & L for repair to CHAIR DINING (rectengular pattern) by taking down/removing the existing broken /unserviceable rear rail carefully without disturbing the adjoining parts Supply and fixing of new rear rail (size 30x65x405mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing,drilling of holes @12.5 mm C/C for canning as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) |
| 7 | M & L for repair to CHAIR DINING (rectengular pattern) by taking down/removing the existing broken /unserviceable Side Stiffner carefully without disturbing the adjoining parts Supply and fixing of new Side Stiffner (size 20x25x430mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) |
| 8 | M & L for repair to CHAIR DINING (rectengular pattern) by taking down/removing the existing broken /unserviceable Centre Stiffner carefully without disturbing the adjoining parts Supply and fixing of new Centre Stiffner (size 20x25x440mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) |
| 9 | M & L for repair to CHAIR DINING (rectengular pattern) by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining parts Supply and fixing of new Back Rest (size 45x15mm curved out of size 45x35x405mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) |
| 10 | M & L for repair to CHAIR DINING (Square Pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining parts Supply and fixing of new Rear leg (size 65x45x890mm with upper end to be chamfered at 45 degree and lower ende at 25x25mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-203/228) |
| 11 | M & L for repair to CHAIR DINING (Square pattern) by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining parts Supply and fixing of new front leg (size 45x45x460mm with lower end size 25x25mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-203/228) |
| 12 | M & L for repair to CHAIR DINING (Square pattern) by taking down/removing the existing broken /unserviceable Back rest carefully without disturbing the adjoining parts Supply and fixing of new Back Rest (size 45x15mm curved out of size 45x35x405mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-203/228) |
| 13 | M & L for repair to CHAIR DINING (Square pattern) by taking down/removing the existing broken /unserviceable Side/Centre Stiffner carefully without disturbing the adjoining parts Supply and fixing of new Side/Centre Stiffner (size 25x20x440mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-203/228) |
| 14 | M & L for repair to CHAIR DINING (Circular pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining parts Supply and fixing of new Rear leg (size 25mm dia at bottom, 45mm dia at entre and 25mm dia at top made out of 65x45x865mm with upper end to be chamfered at 45 degree) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) |
| 15 | M & L for repair to CHAIR DINING (Circular pattern) by taking down/removing the existing broken /unserviceable Front leg carefully without disturbing the adjoining parts Supply and fixing of new Front leg (size 25mm dia at bottom, 45mm dia top made out of 45x45x460mm with upper end to be chamfered at 45 degree) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) |
| 16 | M & L for repair to CHAIR DINING (Circular pattern) by taking down/removing the existing broken /unserviceable Front rail carefully without disturbing the adjoining parts Supply and fixing of new Front rail (size 65x30x420mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) |
| 17 | M & L for repair to CHAIR DINING (Circular pattern) by taking down/removing the existing broken /unserviceable Rear rail carefully without disturbing the adjoining parts Supply and fixing of new Rear rail (size 65x30x405mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) |
| 18 | M & L for repair to CHAIR DINING (Circular pattern) by taking down/removing the existing broken /unserviceable Side rail carefully without disturbing the adjoining parts Supply and fixing of new Side rail (size 65x30x430mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) |
| 19 | M & L for repair to CHAIR DINING (Circular pattern) by taking down/removing the existing broken /unserviceable Side stiffner carefully without disturbing the adjoining parts Supply and fixing of new Side stiffner (size 25x19x430mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) |
| 20 | M & L for repair to CHAIR DINING (Circular pattern) by taking down/removing the existing broken /unserviceable Centre stiffner carefully without disturbing the adjoining parts Supply and fixing of new Centre stiffner (size 25x19x440mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) |
| 21 | M & L for repair to CHAIR DINING (Circular pattern) by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining parts Supply and fixing of new Back Rest (size 45x12 curved out of size 50x30x405mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) |
| 22 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining parts Supply and fixing of new Rear leg (Size 55x25x490mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) |
| 23 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Front leg carefully without disturbing the adjoining parts Supply and fixing of new Front leg (Size 55x25x545mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) |
| 24 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Seat Side Rail carefully without disturbing the adjoining parts Supply and fixing of new Seat Side Rail (Size 70x40x575mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) |
| 25 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Seat Front Rail carefully without disturbing the adjoining parts Supply and fixing of new Seat Front Rail (Size 55x25x510mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) |
| 26 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Seat Rear Rail carefully without disturbing the adjoining parts Supply and fixing of new Seat Rear Rail (Size 50x25x480mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) |
| 27 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Back Frame carefully without disturbing the adjoining parts Supply and fixing of new Back Frame (Size 55x20x480mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) |
| 28 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Back Bottom Frame carefully without disturbing the adjoining parts Supply and fixing of new Back Bottom Frame (Size 55x40x480mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) |
| 29 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Back Side Frame carefully without disturbing the adjoining parts Supply and fixing of new Back Side Frame (Size 70x25x440mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) |
| 30 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Wooden Member carefully without disturbing the adjoining parts Supply and fixing of new Wooden Member (Size 20x15x440mm) screwed to side frame including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) |
| 31 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Arm Rest carefully without disturbing the adjoining parts Supply and fixing of new Arm Rest (Size 65x25x610mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) |
| 32 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Front/Back Base Stiffner carefully without disturbing the adjoining parts Supply and fixing of new Front/Back Base Stiffner (Size 55x25x510mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) |
| 33 | M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Rear/Front leg carefully without disturbing the adjoining parts Supply and fixing of newRear/Front leg (Size 40mm dia at Centre & top and 20mm dia at bottom out of 40x40x490mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17) |
| 34 | M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Seat Side Rail carefully without disturbing the adjoining parts Supply and fixing of new Seat Side Rail (Size 70x25x530mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17) |
| 35 | M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Front Rail carefully without disturbing the adjoining parts Supply and fixing of new Front Rail (Size 55x25x520mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17) |
| 36 | M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Rear Rail carefully without disturbing the adjoining parts Supply and fixing of new Rear Rail (Size 50x25x480mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17) |
| 37 | M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Back Frame carefully without disturbing the adjoining parts Supply and fixing of new Back Frame (Size 55x19x480mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17) |
| 38 | M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Side Frame carefully without disturbing the adjoining parts Supply and fixing of new Side Frame (Size 25x70x530mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17) |
| 39 | M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Arm Rest carefully without disturbing the adjoining parts Supply and fixing of new Arm Rest (Size 65x25x600mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17) |
| 40 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining parts Supply and fixing of new front leg (Size 30x55x660mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) |
| 41 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining parts Supply and fixing of new Rear leg (Size 30x55x890mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) |
| 42 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Seat Side Rail carefully without disturbing the adjoining parts Supply and fixing of new Seat Side Rail (Size 30x65x535mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) |
| 43 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Rear Rail carefully without disturbing the adjoining parts Supply and fixing of new Rear Rail (Size 30x65x470mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) |
| 44 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Front Rail carefully without disturbing the adjoining parts Supply and fixing of new Front Rail (Size 30x65x535mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) |
| 45 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Side stiffner carefully without disturbing the adjoining parts Supply and fixing of new Side stiffner (Size 25x20x470mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) |
| 46 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Centre stiffner carefully without disturbing the adjoining parts Supply and fixing of new Centre stiffner (Size 25x20x535mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) |
| 47 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining parts Supply and fixing of new Back Rest (size 50x15mm curved out of size 50x35x470mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) |
| 48 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Arm Rest carefully without disturbing the adjoining parts Supply and fixing of new Arm Rest (Size 60x25x520mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) |
| 49 | M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining parts Supply and fixing of new front leg (Size 25 mm dia at both ends and 45 mm dia at centre made out of size 45x45x685mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-20) |
| 50 | M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining parts Supply and fixing of new Rear leg (Size 25 mm dia at bottom, 20 mm dia at top and 45 mm dia at centre made out of size 65x45x890mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-20) |
| 51 | M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable Side stiffner carefully without disturbing the adjoining parts Supply and fixing of new Side stiffner (Size 25x19x470mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-20) |
| 52 | M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable Centre stiffner carefully without disturbing the adjoining parts Supply and fixing of new Centre stiffner (Size 25x19x515mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-20) |
| 53 | M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable Front Rail carefully without disturbing the adjoining parts Supply and fixing of new Front Rail (Size 30x65x515mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-20) |
| 54 | M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable Arm Rest carefully without disturbing the adjoining parts Supply and fixing of new Arm Rest (Size 55x19x480mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-20) |
| 55 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining parts Supply and fixing of new front leg (Size bottom 25x25mm out of 45x45x715mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) |
| 56 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining parts Supply and fixing of new Rear leg (Size Bottom 25x25mm out of 60x45x890mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) |
| 57 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Side Stiffner carefully without disturbing the adjoining parts Supply and fixing of new Side Stiffner (Size 25x20x420mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) |
| 58 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Centre Stiffner carefully without disturbing the adjoining parts Supply and fixing of new Centre Stiffner (Size 25x20x535mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) |
| 59 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Front Rail carefully without disturbing the adjoining parts Supply and fixing of new Front Rail (Size 30x65x535mm) including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) |
| 60 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Rear Rail carefully without disturbing the adjoining parts Supply and fixing of new Rear Rail (Size 30x65x470mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) |
| 61 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Side Rail carefully without disturbing the adjoining parts Supply and fixing of new Side Rail (Size 30x65x420mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) |
| 62 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining parts Supply and fixing of new Back Rest (size 20x15mm curved out of size 50x30x470mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) |
| 63 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Arm Rest carefully without disturbing the adjoining parts Supply and fixing of new Arm Rest (Size 60x25x425mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) |
| 64 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining parts Supply and fixing of new Rear leg (Size 55x30x835mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) |
| 65 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining parts Supply and fixing of new front leg (Size 55x30x455mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) |
| 66 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Seat Side Rail carefully without disturbing the adjoining parts Supply and fixing of new Seat Side Rail (Size 30x65x440mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) |
| 67 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Seat Front Rail carefully without disturbing the adjoining parts Supply and fixing of new Seat Front Rail (Size 65x30x445mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) |
| 68 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Seat Rear Rail carefully without disturbing the adjoining parts Supply and fixing of new Seat Rear Rail (Size 65x30x405mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) |
| 69 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Side Stiffner carefully without disturbing the adjoining parts Supply and fixing of new Side Stiffner (Size 20x25x440mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) |
| 70 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Centre Stiffner carefully without disturbing the adjoining parts Supply and fixing of new Centre Stiffner (Size 20x25x445mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) |
| 71 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining parts Supply and fixing of new Back Rest (Size 50x15mm out of size 50x35x405mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) |
| 72 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable seat carefully without disturbing the adjoining part and supply & fixing of new seat (445mmx440mmx405mm) made of 12 mm thick BWR Ply wood, 40 density & 50mm thick PU foam duly covered with inner linen cotton cloth and best quality tapestry cloth not less than Rs 250.00 per metre of approved color and shade placed over the hard wood frame around,duly fixed with counter sunk screws from beneath through corner brackets. The seat shall also be covered with plastic transparent film complete all as specified, shown on drawing and as directed by Engr-in-Charge.. (Drg No. FD-285) |
| 73 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining parts Supply and fixing of new Rear leg (Size 30x55x890mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) |
| 74 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Front leg carefully without disturbing the adjoining parts Supply and fixing of new Front leg (Size 30x55x460mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) |
| 75 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Seat Side Rail carefully without disturbing the adjoining parts Supply and fixing of new Seat Side Rail (Size 30x65x430mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) |
| 76 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Seat Front Rail carefully without disturbing the adjoining parts Supply and fixing of new Seat Front Rail (Size 65x30x440mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) |
| 77 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Seat Rear Rail carefully without disturbing the adjoining parts Supply and fixing of new Seat Rear Rail (Size 65x30x405mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) |
| 78 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Side Stiffner carefully without disturbing the adjoining parts Supply and fixing of new Side Stiffner (Size 20x25x430mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) |
| 79 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Centre Stiffner carefully without disturbing the adjoining parts Supply and fixing of new Centre Stiffner (Size 20x25x440mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) |
| 80 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining parts Supply and fixing of new Back Rest (Size 45x15mm out of 45x35x405mm) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) |
| 81 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable seat carefully without disturbing the adjoining part and supply & fixing of new seat (440mmx430mmx405mm) made of 12 mm thick BWR Ply wood, 40 density & 50mm thick PU foam duly covered with inner linen cotton cloth and best quality tapestry cloth not less than Rs 250.00 per metre of approved color and shade placed over the hard wood frame around,duly fixed with counter sunk screws from beneath through corner brackets. The seat shall also be covered with plastic transparent film complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 82 | S & F in repair PVC hard shoe of best quality as per the existing size and specifications, fixed to various type of chairs, completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 83 | S & F in repair Hard Rubber shoe of best quality as per the existing size and specifications, fixed to various type of chiars complete all as specified and directed. |
| 84 | S & F of powder coated metal corner brackets of size 75mmx75mmx20mm duly fixed with suitable mechanisms to various wooden furniture articles in repairs complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 85 | M & L for Polishing to wooden Chair Dining/ CB B (all Pattern) with two coats of melamine polish over a uniform coat of wood primer of approved grade and brand after cleaning, dusting and scratching the entire wooden suface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. (Drg No. FD-279, 203, 228, 16 & F/DB)(Note: The polishing shall be carried out after making the article intact by tightening all parts and after carrying out antitermite and antibug treatment) |
| 86 | M & L for Polishing to wooden CHAIR WRITING (All Pattern) with two coats of melamine polish over a uniform coat of wood primer of approved grade and brand after cleaning, dusting and scratching the entire wooden suface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. (Drg No.FD-280, 250, 202, 20 ) (Note: The polishing shall be carried out after making the article intact by tightening all parts and after carrying out antitermite and antibug treatment) |
| 87 | M & L for Polishing to wooden CHAIR EASY (All Pattern) with two coats of melamine polish over a uniform coat of wood primer of approved grade and brand after cleaning, dusting and scratching the entire wooden suface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. (Drg No. FD-229, 201, 170)(Note: The polishing shall be carried out after making the article intact by tightening all parts and after carrying out antitermite and antibug treatment) |
| 88 | M & L for Polishing to wooden CHAIR WOODEN BOTTOM with two coats of melamine polish over a uniform coat of wood primer of approved grade and brand after cleaning, dusting and scratching the entire wooden suface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. (Drg No. FD-285)(Note: The polishing shall be carried out after making the article intact by tightening all parts and after carrying out antitermite and antibug treatment) |
| 89 | M & L for Polishing to wooden CHAIR DINING JCO/OR (MAP) with two coats of melamine polish over a uniform coat of wood primer of approved grade and brand after cleaning, dusting and scratching the entire wooden suface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. (Drg No. FD/E6/MAP/05)(Note: The polishing shall be carried out after making the article intact by tightening all parts and after carrying out antitermite and antibug treatment) |
| 90 | M & L for repair to CHAIR DINING/CHAIR CB'B by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, 2mm to 2.5mm wide, 0.50mm thick of white colour, The border of seat / back shall be weaved with 4mm wide 1st quality Virgin plastic cane as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16, 203, 228,279)(Note: The caning of chairs shall be carried only after finishing with painting / polishing all as required at site.) |
| 91 | M & L for repair to CHAIR EASY Seat by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, 2mm to 2.5mm wide, 0.50mm thick of white colour, The border of seat shall be weaved with 4mm wide 1st quality Virgin plastic cane as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229, 201, 17)(Note: The caning of chairs shall be carried only after finishing with painting / polishing all as required at site.) |
| 92 | M & L for repair to CHAIR EASY Back by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, 2mm to 2.5mm wide, 0.50mm thick of white colour, The border of Back shall be weaved with 4mm wide 1st quality Virgin plastic cane as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229, 201, 17)(Note: The caning of chairs shall be carried only after finishing with painting / polishing all as required at site.) |
| 93 | M & L for repair to CHAIR WRITING/CHAIR CB 'A' by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, 2mm to 2.5mm wide, 0.5mm thick of white colour, The border shall be weaved with 4mm wide 1st quality Virgin plastic cane as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-20, 280, 202, 250, DB-4124)(Note: The caning of chairs shall be carried only after finishing with painting / polishing all as required at site.) |
| 94 | M & L for repair to various type steel chairs by running welding at damaged joints of legs/stiffner etc n.exc 6mm thick of metal to be welded and applying one coat of red oxide zinc chrome primer to welded surfaces complete all as shown on drawing, as specified and directed. |
| 95 | M & L for repair to CHAIR VERANDAH (MS) by taking down/removing the existing broken /unserviceable rusted Rear Leg or Seat/Back Rest frame from the chair carefully and S & F new Rear Leg or Seat/Back rest Frame made of 20mm dia conduit of 1.6mm thick, fixed by proper gas welding and applying one coat of red oxide zinc chrome primer to the external surfaces of new conduit after preparation of surfaces complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-19/256) |
| 96 | M & L for repair to CHAIR VERANDAH (MS) by taking down/removing the existing broken /unserviceable rusted MS rod from the chair carefully and S & F new MS rod, 10mm dia connecting rear legs, fixed by proper gas welding and applying one coat of red oxide zinc chrome primer to the external surfaces of new conduit after preparation of surfaces complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-19/226) |
| 97 | M&L for painting to CHAIR VERANDAH (MS) by two coats of synthetic enamel paint of approved shade and quality over a coat of red oxide by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. (Drg No. FD-19/256) |
| 98 | M & L for repair to CHAIR VERANDAH (MS) by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, white, half round of size 4.0mm wide and 0.5mm thick as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-19, 256)(Note: The caning of chairs shall be carried only after finishing with painting all as required at site.) |
| 99 | M & L for repair to CHAIR VERANDAH (ALU) by taking down/removing the existing broken /unserviceable rusted Rear Leg or Seat/Back Rest frame from the chair carefully and S & F new Rear Leg or Seat/Back rest Frame made of 25mm dia aluminium conduit of 16G (1.6mm thick), fixed all as shown on drawing complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-259) |
| 100 | M & L for repair to CHAIR VERANDAH (ALU) by tightening of all loose joints etc including replacement of worn out nuts, bolts, washers etc to retain the stability of chair complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-259) |
| 101 | M & L for repair to CHAIR VERANDAH (ALU) by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic tube 8mm dia and cane with Mat pattern and end of tube to be fixed to seat/back frame with screws and washers as directed and total weight of cane shall be 1.3 Kg per chair as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-259) |
| 102 | M & L for repair to CHAIR VERANDAH (MS STRIP) by taking down/removing the existing broken /unserviceable rusted mild steel strip from the chair carefully and S & F new mild steel strip of 375mm long, 25mm wide and 3mm thick, fixed by proper gas welding complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD/E6MAP/11) |
| 103 | M & L for repair to CHAIR VERANDAH (MS STRIP) by taking down/removing the existing broken /unserviceable rusted Rear Leg from the chair carefully and S & F new mild steel rear leg made of 16mm dia MS conduit pipe 18 Gauge thickand 400mm long fixed by proper gas welding complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD/E6MAP/11) |
| 104 | M & L for repair to CHAIR VERANDAH (MS STRIP) by taking down/removing the existing broken /unserviceable rusted Front Leg from the chair carefully and S & F new mild steel Front leg made of 16mm dia MS conduit pipe 18 Gauge thickand 550mm long fixed by proper gas welding complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD/E6MAP/11) |
| 105 | M&L for painting to CHAIR VERANDAH (MS STRIP) by two coats of synthetic enamel paint of approved shade and quality over a coat of red oxide by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. (Drg No. FD/E6MAP/11) |
| 106 | M & L for repair to CHAIR VERANDAH (PVC Seat & Back) by taking down/removing the existing broken /unserviceable rusted Rear Leg or Seat/Back Rest frame from the chair carefully and S & F new Rear Leg or Seat/Back rest Frame made of 20mm dia conduit of 1.6mm thick, fixed by proper gas welding and applying one coat of primer made to shape and size as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge.(Drg No. FD/MAP-II/06) |
| 107 | M & L for repair to CHAIR VERANDAH (PVC Seat & Back) by taking down/removing the existing broken /unserviceable rusted MS rod from the chair carefully and S & F new MS rod, 10mm dia connecting rear legs, fixed by proper gas welding and applying one coat of primer made to shape and size as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge. (Drg No. FD/MAP-II/06) |
| 108 | M&L for painting to CHAIR VERANDAH (PVC Seat & Back) by two coats of synthetic enamel paint of approved shade and quality over a coat of red oxide by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge.(Drg No. FD/MAP-II/06) |
| 109 | M & L for repair to CHAIR VERANDAH (PVC Seat & Back) by taking down/removing the existing unserviceable/broken PVC Seat & Back of Chair Verandah (PVC Seat & Back) carefully and S & F 2 Nos mild steel strip of 460mm long, 25mm wide and 5mm thick duly two coat of enamel paint of approved color over a coat of red oxide primer & fixed by proper gas welding with suitable Nut/Bolts/Powder coating screws as required in vertical and horizontal for support of Seat & Back respectively, then S&F new Seat & Back size ~460mmx460mmx50mm made by using pressure-treated plywood 8mm and add padding of 50mm thick 40 density foam sheets including screwing, nailing, wedging gluing, new webbing tape duly covered with inner linen cotton cloth and best water resistant cloth of approved color and texture of rate not less than 250 per meter, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 110 | M & L for repair to CHAIR WITH/WITHOUT ARM by taking down/removing the existing broken /unserviceable Seat and Back carefully and S & F new seat and back made of PVC sheet as per the existing specifications and fully upholstered by using new 50mm thick 40 density foam sheets and new webbing tape,PVC lipping and duly covered with new tapestry cloth of approved colour and texture of rate not less than Rs. 250 per mtr fixed by using heavy duty gun tacker, completed all as specified, shown on drawing and as directed by Engr-in-Charge. (Drg No. TP, MAKE: GODREJ, MODEL NO. PCH-7003/7004) |
| 111 | M & L for repair to CHAIR WITH/WITHOUT ARM by taking down/removing the existing unserviceable /Torn out tapsetry cloth, elastic webbing tape from each seat and back and S & F new tapestry cloth including elastic webbing tape from each seat and back of approved colour and texture of rate not less than Rs. 250 per mtr fixed by using heavy duty gun tacker, completed all as specified, shown on drawing and as directed by Engr-in-Charge. (Drg No. TP, MAKE: GODREJ, MODEL NO. PCH-7003/7004) |
| 112 | M & L for repair to CHAIR WITH ARM by taking down/removing the existing broken /unserviceable Arm Rests of chair and S & F new Arm Rests of same shape and size, made of black integral skin polyurethane with 75-85 shore 'Á' hardness & reinforced with MS insert, completed all as specified, shown on drawing and as directed by Engr-in-Charge. (Drg No. TP, MAKE: GODREJ, MODEL NO. PCH-7003) |
| 113 | M & L for repair to CHAIR WITH/WITHOUT ARM by taking down/removing the existing broken/unserviceable floor glides of chair and S & F new heavy-duty floor glides of same shape and size, made of virgin Nylon-6/HDPE with 65-75 shore 'D' hardness, precision-designed with snap-on clips to securely fit Ø 25.4mm–28.6mm tubular steel frames, featuring a flat, non-marring, noise-dampened (<45 dB) base for load up to 136 kg (300 lbs), completed all as specified, shown on drawing and as directed by Engr-in-Charge. (Drg No. TP, MAKE: GODREJ, MODEL NO. PCH-7003/7004) |
| 114 | M & L for repair to CHAIR WITH/WITHOUT ARM by painting to old steel surfaces of each Chair by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth and apply two coats of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting through a spray machine, completed all as specified, shown on drawing and as directed by Engr-in-Charge. (Drg No. TP, MAKE: GODREJ, MODEL NO. PCH-7003/7004) |
| 115 | M & L for repair to CHAIR COMPUTER GODREJ REGENCY (MODEL NO. PCH-7002D) by replacement of Gas Lift Cylinder: Taking down and removing the existing broken / unserviceable pneumatic cylinder carefully without damaging the adjoining star base or seat frame assembly, and Supplying and Fixing new heavy-duty Hydraulic Gas Lift Cylinder, Class 4 certified, engineered for a height adjustment range of 46cm to 58.5cm, including tightening joints and testing, completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 116 | M & L for repair to CHAIR COMPUTER GODREJ REGENCY (MODEL NO. PCH-7002D) by replacement of Center-Tilt Mechanism Plate: Taking down and removing the existing worn out / structural defective center-tilt mechanism assembly carefully, and Supplying and Fixing new Center-Tilt Mechanism Plate complete with upright tilt-locking mechanism assembly and tension control knob, including proper alignment, pinning, screwing, and mechanical testing to retain structural stability, completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 117 | M & L for repair to CHAIR COMPUTER GODREJ REGENCY (MODEL NO. PCH-7002D) by replacement of Castors: Taking down and removing the existing broken / unserviceable floor castors carefully, and Supplying and Fixing new Twin Wheel Nylon Castors of size 50mm diameter, durable friction-free type, precision-designed to securely fit and be fully compatible with the Godrej iron star base, completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 118 | M & L for repair to CHAIR COMPUTER GODREJ REGENCY (MODEL NO. PCH-7002D) by Seat & Back Upholstery & Cushioning Refurbishment: Stripping away the existing torn / unserviceable upholstery fabric and degraded cushioning material carefully, and completely refurbishing the Seat & Back by providing and fixing new High-Resilience (HR) Polyurethane foam sheets of 40 density and 50mm thickness, duly covered with premium inner linen cotton cloth and best quality breathable high-stretch knitted polyester fabric of approved color and texture of rate not less than Rs. 250 per mtr, securely fixed using heavy-duty gun tacker or mechanical fasteners, completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 119 | M & L for repair to CHAIR COMPUTER GODREJ REGENCY (MODEL NO. PCH-7002D) by Seat & Back Upholstery Refurbishment: Stripping away the existing torn / unserviceable upholstery fabric from both the seat and the backrest cushions carefully without disturbing or replacing the underlying serviceable cushioning material, and completely refurbishing the chair profile by providing and fixing best quality breathable high-stretch knitted polyester fabric of approved color and texture of rate not less than Rs. 250 per mtr, duly covered over premium inner linen cotton cloth, securely fixed to the existing foam profiles using heavy-duty gun tacker or mechanical fasteners, completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 120 | M & L for repair to CHAIR COMPUTER GODREJ REGENCY (MODEL NO. PCH-7002D) by replacement of Fixed Armrest Pads: Taking down and removing the existing broken / unserviceable armrest pads carefully, and Supplying and Fixing new matching Fixed Armrest Pads (1 No. Left and 1 No. Right) made of ergonomic black polyurethane material reinforced with internal metal inserts, including providing and tightening new high-tensile mounting bolts, completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 121 | M & L for repair to CHAIR COMPUTER GODREJ REGENCY (MODEL NO. PCH-7002D) by replacement of 5 Star Base: Taking down and removing the existing cracked, broken, or mechanically bent structural star base carefully without damaging the pneumatic cylinder, and Supplying and Fixing new heavy-duty 5 Star Base made of premium reinforced iron / heavy-gauge steel, finished with anti-corrosive powder coating, complete with pre-machined central socket and castor mounting hubs to retain original chair stability, completed all as specified and as directed by Engr-in-Charge. |
| 122 | M & L for Spray Painting to old steel surfaces of CHAIR COMPUTER GODREJ REGENCY (MODEL NO. PCH-7002D) in repairs: Preparing steel/iron structural surfaces by aggressive peeling and stripping of old deteriorated paint using grinding machine or approved paint remover solution, taking out structural dents, filling metal putty to uneven profiles or fissures, sanding down smooth with fine emery paper, dusting clean, and applying a protective undercoat of red-oxide primer followed by two coats of synthetic enamel spray painting of approved brand and high-gloss matching shade to achieve a finish similar to new furniture, completed all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender