Tender For Repair/Maintenance To Sewage Disposal Including Gully Traps, Man Holes, Septic Tanks, Filter Bed Etc And Other Connected Works To The Buildings Located In Area B At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
Tender Value
40 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
6 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance To Sewage Disposal Including Gully Traps, Man Holes, Septic Tanks, Filter Bed Etc And Other Connected Works To The Buildings Located In Area B At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning of blockages of sewage lines of any dia and depth upto lenth n exc 15mtr, manholes of any size and depth, working in foul condition, cleaning of manholes and sewage lines by rodding to and from flushing with water in sweage lines between successive manholes and keep the system functional including water closets, floor traps, nahani traps, gully traps etc, upto final drop/outlet into septic tanks, removing all blockages in fould station manually or mechanically including cleaning of soil/waste/vent pipes and rain water pipes of any descriopton and size in the area 'D' under GE (I) Dockyard. Contractor shall provide 04 safaiwala daily) , complete all as specified and directed.Note:- 1. Contractor has to arrange all necessary tools and kits for workers on the daily basis to complete the job. |
| 2 | 2. On the daily basis attendance for the detailed wokeers to be maintain on register and should be countersigned by JE / AGE.3. Contractor or his authorize representative has to collect complaints slips from complain cell of GE (I) DM on the daily basis and should resubmit the same duly signed by the user to the office after completion of the job.4. Complaints so received on daily basis has to be completed within 24 hours, other wise recovery of Rs 5000.00 per job will be recovered by the Engr in Charge. |
| 3 | Demolition of plain cement concrete in ground floors and paving including floor tiles not exc 15 cm thick but above ground floors or highly elevated and removing the debries from Dockyard premises complete all as specified and directed. |
| 4 | M&L for 75 mm thick cement concrete 1:3:6, type C2, (using 40mm graded stone aggregate) as in floor, finishing cement concrete surface even and smooth wihtout using extra cement complete all as specified and directed. |
| 5 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for includiing demolition of drain pipes and removing the debries from Dockyard premises complete all as specified and directed. |
| 6 | M&L for PCC 1:2:4, type B1, (using 20mm graded stone aggregate) for coping, lintel bands etc complete all as specified and directed. |
| 7 | M&L for cement concrete type B2 1:2:4 (40 mm graded aggregate) as in surface channels and drains complete all as specified and directed. |
| 8 | M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 9 | Demolition of reinforced cement concrete as in manhole covers complete all as specified and directed. |
| 10 | M&L for precast cement Concrete 1:2:4, type B1, (using 20mm graded stone aggregate), in landing, cover slabes (for manhole) chajjas and similar articles including chamfers weathering, throating etc and setting in CM 1:4 complete with joints to match complete all as specified and directed. |
| 11 | M&L for mild steel TMT bars 10mm dia and over , cut to length and bent to shape required, including cranking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 12 | Demolition of brick masonry built in cement mortar including all quoins, pillars etc and removing the debries from the Dockyard premises complete all as specified and directed. |
| 13 | M&L pre-cast cement concrete block masonary in PCC 1:3:6 type C1 using 20mm graded stone aggregate with solid block, exceeding 10cm in width setting in CM 1:4 complete all as specified and directed. |
| 14 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | Excavation in trenches, not exc 1.5M wide and not exc 1.5M deep and getting out in hard/dense soil complete all as specified and directed. |
| 17 | Returning filling in including spreading, leveling watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 18 | Removal of extra excavated soil not exc 50m and depositing where directed at level not exc 1.5M above the starting point complete all as specified and directed. |
| 19 | M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate), in foundation filling and mass conctere complete all as specified and directed. |
| 20 | Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) (internal dia 150mm) set in cement mortar all as specified and directed. |
| 21 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) (internal dia 200mm) set in cement mortar all as specified and directed. |
| 22 | M&L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate), concrete bed to 150 mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 23 | M&L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate), concrete bed to 200 mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 24 | M & L for salt-glazed stone ware drain pipes, 150mm dia (internal dia) laid in trenches and jointed as specified complete all as specified and directed. |
| 25 | M & L for salt-glazed stone ware drain pipes, 200mm dia (internal dia) laid in trenches and jointed as specified complete all as specified and directed. |
| 26 | M&L for cutting of existing 150mm dia manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching required complete all as specified and directed. |
| 27 | M&L for cutting of existing 225mm dia manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching required complete all as specified and di rected. |
| 28 | S&F for salt glazed stoneware gully traps (size 180X150) square or round mouthed type 'P' complete all as specified and directed. |
| 29 | De-watering of septic tanks and soakage wells by manually or with pumping set and draining out the same out waste material from Dockyard premises all as complete all as specified and directed. |
| 30 | Opening cover, taking out night soil excreta, sludge etc from septic tank/ sewage sump of any capacity and removing the same from Dockyard premises all as complete all as specified and directed. |
| 31 | Demolition of cement concrete of any description (in sunken floors) and in any position and removal of debris from Dockyard premises complete all as specified and directed. |
| 32 | M&L removing all dust/dirt from sunken floor and applying two layers of cement slurry mixed withacylic based polymer modified cementitious composite compound coating such as product like sika Latex powder manufactured by sika India Pvt Ltd or equivalent product manufactured by Fosroc chemicals (India Ltd) / Pidilite industries or as approved list makes on concrete / brick surfaces as water proofing slurry coating as per manufactures instructions complete all as specified and directed. |
| 33 | M&L rendering 20mm thick in two coats, 10mm thick each coat with Polymer mortar (cement mortar 1:4 mixed with acrylic based polymer modified cementious composite compound such as product such as product like sika Latex powder manufactured by sika India Pvt Ltd or equivalent product manufactured by Fosroc chemicals (India Ltd) / Pidilite industries or as approved list makes on concrete / brick surfaces and finishes the surfface even and smooth without using extra cement complete all as specified and directed. |
| 34 | M&L polythene 200 micron thick laid on a adhasive complete all as specified and directed. |
| 35 | M/L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in filling in sunken floors complete all as specified and directed. |
| 36 | M&L for 25 mm thick cement concrete type 'B-0' 1:2:4 using 12.5mm graded stone aggregate as in flooring complete all as specified and directed. |
| 37 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing)and rubbish off the premises complete all as specified and directed. |
| 38 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including screed bed in CM 1:6, 15mm thick complete all s specified and directed. |
| 39 | M&L for coloured glazed ceramic tiles 450 x 300 x 7 mm thick in dado set and jointed in neat cement slurry and pointed in coloured cement to match fixed over incl redering in CM 1:4, 10mm thick complete all as specified and directed. |
| 40 | M&L chequered cement concrete tiles with grey and any pigments 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors and incl cement screed 15mm thick in 1:6 all as specified and directed |
| 41 | S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white excluding fixing bolts, flushing cistern and flush pipe incl taking out the existig unserviceable pedestal pan complete all as specified and directed. |
| 42 | S&F in repairs vitreous china squatting pan `ORISSA` pattern size 580 x 440 mm with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe and provision of concrete bedding complete making good floor all complete all as specified and directed. |
| 43 | S & F PVC valveless, syphonic action type, flushing cistern,10 ltr capacity low level, white, with inlet, ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC. 32 mm dia,to pedestal pan, including all joints and all complete all as specified and directed. |
| 44 | Taking down PVC (SWR) pipes of any dia or size all as specfied and directed. |
| 45 | S&F in repairs 110 mm dia PVC pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all specified and directed. |
| 46 | S&F in repairs 75 mm dia PVC pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 47 | S&F in repairs PVC (SWR) bend 110 mm bore pipe complete all as specified and directed. |
| 48 | S&F in repairs PVC (SWR) bend 75 mm bore pipe complete all as specified and directed. |
| 49 | M&L for preparation of old surface of walls and applying two coats of white wash all as complete all as specified and directed. |
| 50 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 51 | M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,manhole covers, duct covers and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 52 | S&F for rolled mild steel chequered plate as covers confirming to Fe-290, Gde-E-165 welded to supporting of duct covers complete all as specified and directed. |
| 53 | M&L preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of zinc chromate primer all complete all as specified and directed. |
| 54 | M&L for preparation of new plastered surfaces of walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm diluted with water as per manufacturer instructions by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface complete all as specified and directed. |
| 55 | S&F PVC (SWR) floor trap, 100 mm dia, plain with brass CP grating including jointing with solvent cement fixed complete all as specified and directed including taking down old one all as specified and directed. |
| 56 | S&F 15 mm dia PVC connections, 600 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one all as specified and directed. |
| 57 | S&F vitreous China urinals, bowl type, flat back of size 465 x 355 x 265 mm (minimum) white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinals against wall in CM (1:2), screwing urinal to plug etc. complete all as specified and directed by including taking out old one complete all as specified and directed. |
| 58 | S&F vitereous china urinal partition white of size 310x700mm etc. complete all as specified and directed including taking out old one all as specified and directed. |
| 59 | S&F urinal spreader of chromium plated push type with PVC pipe for fixing with 15 mm dia pipe complete all as specified and directed. |
| 60 | Supply & fix health faucet 15 mm bore brass chromium plated jet spray with CP pipe of 900 mm long and connector complete all as specified and as directed including taking down old one all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender