Tender For Repairs To Various Perimeter Barrier Enhancement, Chainlink Fencing, Security Fencing, Gates Etc At Various Locations Of Fodc, installation Abhimanyu, Nai, So(K) And Various Other Otm Accn At Common Area Under Age B/R-Ii At Naval Station K
Tender Value
55 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
14 days left
EMD
1.07 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Various Perimeter Barrier Enhancement, Chainlink Fencing, Security Fencing, Gates Etc At Various Locations Of Fodc, installation Abhimanyu, Nai, So(K) And Various Other Otm Accn At Common Area Under Age B/R-Ii At Naval Station Karanja.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE KARANJA NAME OF WORK : REPAIRS TO VARIOUS PERIMETER BARRIER ENHANCEMENT, CHAINLINK FENCING, SECURITY FENCING, GATES ETC AT VARIOUS LOCATIONS OF FODC, INS ABHIMANYU, NAI, SO(K) AND VARIOUS OTHER OTM ACCN AT COMMON AREA UNDER AGE B/R-II AT NAVAL STATION KARANJA. CONTRACT AGREEMENT: CWE KJ(K) - OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Dismantling posts or struts (Wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground (posts embedded in in concrete, brick work, masonry work, etc. ) |
| 3 | Dismantling fencing wire mesh any type complete all as specified and as directed |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided incl doors, gates for complete all as specified and as directed |
| 5 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface hard or dence soil |
| 6 | Supply and Fix posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire mesh, etc.; flat iron fillets( for securing wire mesh etc.) including all necessary drilling, bolting or riviting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 7 | Supply and Fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square but, length of boltexc 5cm but n exc 10cmlong.(Diameter of neck in 11 to 15 mm) |
| 8 | Supply and Fix of mild steel security chain link fencing 60mmx60mm with PVC coated mesh made out of 3.0 mm dia MS wire and 1.00mm thick PVC Complete all as specfied and directed. |
| 9 | Supply and Fix inrepair to Galvanized 2 stand Steel Barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standerd rails, straining bolts,including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc incl taking down of existing barbed wire as directed (each line wire to be measured) complete all as specified and directed by Engr-in- Charge |
| 10 | Restriaining resecurig including making good staples or tighting of cross wire galvanised barbed wire in any dia of wire or any spacing all as specified and directed by Engr-in-Charge. |
| 11 | Taking down and refixing in same position after replaing of damage of fencing post concertina coil any dia reinforced punched(chrome razor or blade wire with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incuding galvanised MS staples/Clips for tying at crossing complete all as specified and directed by Engineer–in-Charge |
| 12 | Supply and Fix in repair any dia concertina coil directed by Engr-in-Charge reinforced punched(chrome razor or blade wire with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incuding galvanised MS staples/ Clips for tying at crossing complete including taking down of existing concertina coil all as specified and directed by Engineer–in-Charge |
| 13 | Taking down existing angle iron from wall embadded in PCC and refixing in the same opening/position complete all as specified and as directed by Engr-in-Charge. |
| 14 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 15 | Supply and Fix mild steel round bars 10mm dia and over, in horizontal support for chain link straining of fencing including cut to length, bent to shape required including cranking, bending spirally for hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) complete all as specified and directed. |
| 16 | Supply and replacement of Manila Rope-3 strand, rich golden dark brown colour, stiff hairs, dia of the rope having exc 40mm but not exc 44mm, min breakable load of rope between 9494.00 Kg to 11625.00 Kg, weight not less than 1.15 Kg per RM and resistant to salt water damage, including cut to length, bent/ mould to shape required and tying with wrap the end with tape, soft eye splice, whipped or make a knot after cutting the rope, other side with rope eye and eye splice of mild steel hook as per IS norms. Rope shall be manufacure as per IS-1084:2005 specification, and meet the quality of standard EN ISO 1181-2004, the rope shall be well laid and free from defects, the contractor shall submit vaild test certificate from National Test House (Govt of india) as per IS norms complete all as specified and as directed by Engr-in-charge.Note: (i) Rate of soft eye splice and eye splice of mild steel hook is deemed to be inclusive of rate quoted by the contractor.(ii) Work to be carried out from authorised agency Garware or equivalent as approved by GE |
| 17 | Supply and replacement of polypropylene rope-3 strand, off-whice coloure, silky and shiny, smooth and soft to touch. not plasticky, dia of the rope having exc 36mm not but exc 40mm, min breakable load of rope between 24900.00 Kg to 30000.00 Kg, weight not less than 0.90 Kg per RM and resistant to alkalis at normal temperatures, including cut to length, bent/ mould to shape required and tying with wrap the end with tape, soft eye splice, whipped or make a knot after cutting the rope, other side with rope eye and eye splice of mild steel hook as per IS norms. Rope shall be manufacure as per IS-1084:2005 specification and meet the quality of standard EN ISO 1140-2004, the rope shall be well laid and free from defects, the contractor shall submit vaild test certificate from National Test House (Govt of india) as per IS norms complete all as specified and as directed by Engr-in-charge.Make: Garware or equivalent as approved by GE.Note: (i) Rate of soft eye splice and eye splice of mild steel hook is deemed to be inclusive of rate quoted by the contractor.(ii) Work to be carried out from authorised agency Garware or equivalent as approved by GE. |
| 18 | Supply and replacement of mild steel single wheel pully block system for having load capacity -1400lbs as per BS-4018-1966, suitable for rope of dia 36 to 44mm as per IS-3142-1993 complete all as specified and as directed by Engr-in-charge. |
| 19 | Supply and replacement of triple layer safety cargo nets of polyproylence (PP) net inside (mesh rope) dia of rope 16mm and border rope 20mm dia of rope second layer is 2.5mm baraided mesh 35mmx35mm, third layer is monofilament net UV stablilized net with welding/ grinding splatter resistant green 100 gsm high tenacity, any colour as approved by Engr-in-Charge, UV-protected with a minimum braking strenghth of 152.00 kN, PP rope certified to IS-5175:2014 and safety net made by as per EN-1263, tiles cord 2.5m ling at four corner, installation is done using brass or stainless steel hooks on the periphery or by using strong cable ties and nylone rope 40mm dia, double stitched at the edges and nylon knotted thread for tying complete all as specified and as directed by Engr-in-charge.Make: Garware or equivalent as approved by GE. |
| 20 | Supply and replacement of climbing cargo safety nets of manila rope inside polyproylence (PP) net inside (mesh rope) dia of rope 24mm and border rope 28mm dia of rope high tenacity, rich golden dark brown colour as approved by Engr-in-Charge, UV-protected mesh customized to 250mm x 250mm having suitable handles of 3m at an interval of 1.5m with a minimum braking strenghth of 36.00 kN, rope certified to IS-9936:1992 and safety net made by as per EN-1263 complete all as specified and as directed by Engr-in-charge.Make: Garware or equivalent as approved by GE. |
| 21 | Supply and replacement of wooden rope ladder having wooden rugs 450.00mm long, rope to rope distance 350.00mm and rug to rug distance 400.00mm and dia of rug 45mm, border rope polypropylene 16.00mm dia complete all as specified and as directed by Engr-in-charge.Make: Garware or equivalent as approved by GE. |
| 22 | Supply and replacement of aluminium rope ladder having aluminium rugs 450.00mm long, rope to rope distance 350.00mm and rug to rug distance 400.00mm and dia of rug 25.00mm, border rope polypropylene 16.00mm dia complete all as specified and as directed by Engr-in-charge.Make: Garware or equivalent as approved by GE. |
| 23 | Supply and replacement of mild steel locking arrangement with hook or eye hook/ clips, suitable for 75 to 100 mm dia of mild steel section complete all as specified and as directed by Engr-in-charge.Make: Garware or equivalent as approved by GE. |
| 24 | Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed. |
| 25 | All as per srl item No. 23 above but pre-cast concrete block walling complete all as specified and directed. |
| 26 | Material and Labour for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width in type C1 (1:3:6) 20 mm graged stone aggregate and setting in mortar (1:6) complete all as specified and as directed |
| 27 | All as per srl item No. 25 here in before but except PCC Block WorksNote:- Serviceable Blocks obatined from srl item No. 24 shall be re-used in srl item No. 26 after cleaning etc complete all as specified and directed by Engr-in-Charge. |
| 28 | Material and Labour brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed |
| 29 | All as per srl item No. 27 here in before but except bricks Note:- Serviceable bricks obatined from srl item No. 23 shall be re-used in srl item No. 28 after cleaning etc complete all as specified and directed by Engr-in-Charge. |
| 30 | Material and Labour for walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 all as specified and directed. |
| 31 | All as per item No. 29 hereinbefore but except stone. Note:- stone obtained from item No 23 shall be reused. |
| 32 | Racking out joints/ pointing of cement / cement lime mortar to random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and directed. |
| 33 | Material and Labour for raised pointing to random or polygonal rubble masonry uncoursed or brought upto course in CM (1:4) complete all as specified and directed. |
| 34 | Material and Labour for raised pointing to precast concrete block masonary wall in CM (1:4) complete all as specified and directed. |
| 35 | Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified. |
| 36 | Material and Labour for rendering 15 mm thick in CM 1:4 on fair faces of brick work /concrete surfaces ,finished even and smooth without using extra cement complete all as specified and directed. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.) |
| 37 | Material and Labour for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer on wall/roof complete all as specified and directed |
| 38 | Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. . |
| 39 | Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed. |
| 40 | Material and labour for cement concrete type D-2 1:4:8 using 40mm graded crushed stone aggregate as in foundations, fillings & mass concrete etc all as specified and directed. |
| 41 | Material and labour for cement concrete type B-1 1:2:4 using 20mm graded crushed stone aggregate as in surface channel or drain complete all as specified and directed. |
| 42 | Material and labour for cement concrete type B-1 1:2:4 using 20mm graded crushed stone aggregate as in roof kerbing, or mud stops, rounded or chafered on edges and all around of chequered tile complete all as specified and directed. |
| 43 | Material and labour for cement concrete type C-1 1:3:6 using 20mm graded crushed stone aggregate in coping bed black ,in plinth protection etc including necessary form work complete all as specified and directed. |
| 44 | Material and labour for cement concrete C-2 1:3:6 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, in fencing pole all as specified and directed. |
| 45 | Material and labour for 100mm thick cement concrete type B-2 1:2:4 using 40mm graded crushed stone aggregate in path/floor finished fair even and smooth without using extra cement, laid in altermate panels of size not exc 4 sqm each including bitumen filling in joints complete all specified and directed by Engr-in-Charge. |
| 46 | Material and Labour for 20mm thick Wearproof topping as specified (incorporating an approved metallic floor hardner) as per manfacutre's instruction, as specified laid on concrete floors and pavings and path, and finished even and smooth (except metallic hardner) all as specified and directed by Engr-in-Charge. (Note metallic hardender & glass strips area measured and paid separately). |
| 47 | Supply only 22 mm wide and 3 mm thick glass dividing strips as laid in floor all as specified and directed by Engr-in-Charge. |
| 48 | Supply on metallic hardner mix with cement cncrete as per manufacture instruction all as directed by Engr-in-Charge. Make : DR. FIXIT PIDE PROOF LW, FOSROC |
| 49 | Supply only liquid water proofing compound mix cement concrete/cement plaster as per manufacture instruction all as directed by Engr-in-Charge. Make : DR. FIXIT PIDE PROOF LW, FOSROC |
| 50 | Supply and Fix of Bands, straps,supports or stays for rainwater, ventailing pipes, including bolts, if required hooks,heavy, for large gates, hook and pintle hinges; large hasps and stables; chains;hand made sliding bolts; clamps; hold fasts; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde -165. complete all as specified and directed by Engineer-in-charge. |
| 51 | Supply and Fix mild steel works as in doors or gates (ornamental) of angle or other sectons with gusset plates, rails, braces etc complete drilled, welded etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete. |
| 52 | Supply and Fix Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes framed guard bars; barred iron doors, laddrs, framed balusters walk ways railings, frame work of water tank and similar work conforming to Fe- 290. Gde-E-165 |
| 53 | Material and Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed by Engr-in-Charge. |
| 54 | Material and Labour for preparation of new steel surfaces any description over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. |
| 55 | Material and Labour for preparation of new steel surfaces any description nexc 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. |
| 56 | Preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge. |
| 57 | Taking down old paver blocks any shape, size and thickness from the existing surface and refixing at the same place after levelling the ground by using sand caushion for maintaing camber and slope all as per directed by Engr-In Charge Note:- Sand Cushion will be paid under Item No 60 |
| 58 | Material and Labour Chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with gray cement and pigments in any colour machine preassed glazed , over cement screed bed 15mm thick cement motor 1:6 all as specified and as directed by Engr-in-charge.make nitco/arena or equivalent all as specified and directed by Engr-in-Charge. |
| 59 | Material and Labour for 60 mm thickness Machine pressed precast concrete inter locking paver block glazed coloured upto 6mm on top in any shape and size , strength not less than M-35 Grade all as directed by Engr-in-charge |
| 60 | Material and Labour for 80 mm thickness Machine pressed precast concrete inter locking paver block glazed coloured upto 6mm on top in any shape and size , strength not less than M-40 Grade all as directed by Engr-in-charge |
| 61 | Material and Labour Sand filling under floors or in foundations including watering and consolidation all as specified and directed by Engr-in-Charge. |
| 62 | Material and Labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including grinding and polishing incldung 20 mm thick Cement motar 1:4 including dismentling of oldstone slab / tiles complete all as specified and directed |
| 63 | Material and Labour for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including over 10mm thick recuing in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface etc including dismentlling of old tile all as specified and as directed by Engr-in-Charge |
| 64 | Material and Labourprecast cement concrete in type B-1, 1:2:4 (20 mm graded aggregate) as in Kerb stone including weathering,slightly rounded or chamfered angles including form work all as directed inclusing fixed in cement mortar 1:4.(Size of kerb stone as directed by Engineer in charge) Total in Figures 0.0 23 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender