Tender For Security Upgradation Of B Gate At Sunjuwan Under Ge Jammu.
Tender Value
42.57 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
19 days left
EMD
85140
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Security Upgradation Of B Gate At Sunjuwan Under Ge Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | B/R Portion: -Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Removal of excavated material as soils not exceeding 50m and at a level not exceeding 1.5m above the starting point and depositing complete all as specified and as directed. |
| 4 | Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and as directed. |
| 5 | Hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface complete all as specified and as directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 7 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 8 | Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 9 | Taking down cement plaster on brick/ stone/ concrete surfaces on wall/ ceiling surface or any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 10 | Taking down existing chain link fencing and re-fixing in new location complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Brick work with old size bricks having crushing strength not less than 100 Kg/Sqcm straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) complete all as specified and as directed. |
| 12 | TMT bars 10mm dia and over in reinforcement cut to length, bent to shape required, including cranking, bending spirally hooping for columns, hooking ends and binding with wire and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. |
| 13 | TMT bars 5mm dia and over upto including 10mm dia as in stirrups bending spirally or hooping for columns, hooking ends and binding with mild steel wire not less than 0.90mm dia complete all as specified and as directed. |
| 14 | Rolled mild steel framed work such as sliding/ openable gates of angles or other section with gusset plate, rails, braces, etc complete, drilled for fixing or other covering, doors, etc. to be prepared for hanging or sliding with including either hooks and hinges and all bearing and non bearing based rollers for sliding the gate (exclusive of steel sheeting or other covering and fixing complete confirming to Fe-410-W (Grade E-250 quality 'A')) complete all as specified and as directed. |
| 15 | Mild steel work as in bands, traps, hooks (stay) heavy for large gates, hooks and pintel hinges, large hasp and staple, hold fast and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 16 | 3.0mm thick mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm complete all as specified and as directed. |
| 17 | Fixing only for rolled mild steel framed work such as sliding/ openable gates of angles or other section with gusset plate, rails, braces, etc. complete all as specified and as directed. |
| 18 | 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub-base to floor finishes complete all as specified and as directed. |
| 19 | Plain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in copings etc. including weathering, slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified and as directed. |
| 20 | Providing Pre-cast reinforced cement concrete (1:2:4) type B-1 set in cement mortar (1:6) as in cover slab including formwork complete all as specified and as directed. |
| 21 | Cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 22 | RCC M-25 (using 20mm graded crushed stone aggregate) design mix as in foundation, including raft, fooling foundation beams plinth beams bases for columns complete all as specified and as directed. |
| 23 | RCC M-25 (using 20mm graded crushed stone aggregate) design mix as in columns, pillars, piers, posts and struts etc complete all as specified and as directed. |
| 24 | Formwork to sides of concrete foundation footing base of columns and raft beams sides and soffits (if any) of plinth beams complete all as specified and as directed. |
| 25 | Formwork to sides of pillars, posts, struts, pier, columns square, rectangular or polygonal rough finished surface of concrete complete all as specified and as directed. |
| 26 | Rendering 15mm thick cement plaster (1:4) on fair faces of brick work or concrete surfaces and finished fair and even complete all as specified and as directed. |
| 27 | Painting with synthetic enamel paint two coats over a coat of red oxide primer including preparing the new untreated steel surfaces of any description over 10cm in width or girth complete all as specified and as directed. |
| 28 | Preparing newly plastered or concrete surfaces of wall and applying two coats of cement based paint over a coat of white wash complete all as specified and as directed. |
| 29 | Preparing newly plastered or concrete surfaces of wall and applying two coats of cement based paint over a coat of white wash with camouflage pattern complete all as specified and as directed by Engineer-in-Charge. |
| 30 | 1mm thick SS Alphabets of size 450mm long, fixed with SS screw on wall upto height of 8 metres including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design and pattern in footpath, parks, lawns, drive ways or light traffic, parking etc, of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Granite stone jet black/ Cherry red in colour, machine cut and polished, 15 to 18mm thick as in veneering/ cladding of columns, walls and soffits of slab etc. fixed with chemical adhesive over and including 10mm thick rendering in cement mortar (1:3) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including machine grinding and polishing complete all as specified and as directed.Notes: - (i) The granite stone fixed in vertical surfaces/ soffits shall be anchored with minimum 2 Nos frame anchors HILTI HRD-C 10X100 per 1 Sqm of granite slab. The frame anchors shall be duly drilled and grouted into brick/ concrete surfaces for anchoring of the granite stone slabs in vertical surfaces all as directed.(ii) The unit rates quoted by the Contractor shall include the provision of frame anchors as specified in Note No (i) above and nothing extra from the Department shall be admissible on this account. |
| 33 | E/M Portion: -Excavation in trenches more than 1.5 mtr wide and less than 3 mtr in depth and getting out in hard soil complete all as specified and as directed. |
| 34 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out in hard soil complete all as specified and as directed. |
| 35 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. |
| 36 | Removing excavated/ surplus soil not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed. |
| 37 | Sand cushioning of cables provided with a layer of sand 8cm deep before laying the cable and 15 cm depth after punning down and stretching the cable complete all as specified and as directed by Engineer-in-Charge. |
| 38 | Supply and fixing in repairs LT XLPE insulated heavy duty armoured cable 1100 volts grade, multistranded aluminium conductor electric cable, cross sectional area 10 Sqmm 4 core passing through HDPE pipe in trenches including necessary connection with lugs, cable gland and fixing arrangements complete all as specified and as directed.Note: - Wherever cable fixing/ connection, suitable thimbles should be used as per site situation all as specified and as directed. |
| 39 | Supply and fixing in replacement of automatic street light switch using Nature Switch for automatic switching of Street lights based on LUX level of natural light the sensor (nature switch) along with suitable power contactors and MCBs (Input-Output) should be enclosed in pole/ wall mountable enclosure made of rust proof, Electric shock proof, termite proof and FR grade SMC junction box conforming to IP-54, the contactor, MCBs and copper circuit wiring (min. 10 Sqmm) should be enough to take : Single phase load of 5 KW, contactor rating 40 Amps; MCB (SP) rating 40 Amps complete all as specified and as directed. |
| 40 | Supply and fixing in replacement of single piece moulded PVC box of size 230 x 185 x 110mm outer dimensions consisting of one porcelain kit kat 16 Amps and one 4 way connector including all necessary fixing arrangements to fix to pole i.e. clamps, nuts, bolts and washers of suitable size after dismantling the existing pole coping and replacement of cable lugs and cable gland complete all as specified and as directed. |
| 41 | Supply, laying and fixing DWC HDPE pipe for protection of cables (orange in colur) of size 75mm dia complete with fitting and including cutting, jointing and clamping complete all as specified and as directed. |
| 42 | Material and labour in replacement of unserviceable street light bracket made out of GI pipe 1.2 mtr long 25mm dia medium grade bent to shape as directed including mild steel clamps made out of 25mm x 3mm flat iron for fixing bracket suitable for PCC/ street poles including nuts and bolts of required size including painting with one coat of aluminium paint over a coat of red oxide/ primer complete all as specified and as directed including taking down of old unserviceable bracket. |
| 43 | Cement concrete (1:2:4) type B-2 (using 20mm graded crushed stone aggregate) including weathering, slightly rounded chamfered angles and throating including for coping of LT pole necessary form work complete all as specified and as directed. |
| 44 | Cement concrete (1:3:6) type C-2 (using 20mm graded crushed stone aggregate) including weathering, slightly rounded chamfered angles and throating for LT electric pole foundation including necessary form work complete all as specified and as directed. |
| 45 | Cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation bed for LT electric poles complete all as specified and as directed. |
| 46 | Supply and fixing flexible copper cable 1.5 Sqmm passing through PVC conduit 20mm including making proper fixing arrangement by suitable size of clamp nut bolts and washers with the pole for connection of street light from junction box to street light complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Supply and erection in position of steel tubular pole swagged complete with cast iron base plate finial taper plug, bolts, nuts, pole caps and screws, top cover all as specified type 410 SP-31 (9 mtr long). The poles shall be painted with two coats of black bituminous paint through internally and externally upto planting depth and balance portion of pole shall be painted with two coats of aluminium paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.Note: - Excavation and earth work shall be paid separately. |
| 48 | Material and labour for fabricate, supply and install cubicle type, CPRI approved LT panel board, outdoor type, totally enclosed, dust and vermin proof (protection class IP 65) both side opening front and back with self locking arrangement made out of mild steel angle iron frame work, mild steel flat iron and CRCA sheet of 3.15mm thick as per IS 5039 with suitable side supported legs duly painted with powder coated paint of approved shade. The panel shall be suitable for 415 Volts, 50 Hz, 3 phase 4 wire system and shall be complete with 400 Amp capacity aluminium bus bar 800 Amp, including complete wiring the panel board with suitable size of PVC insulated, multistranded copper cables and connected accessories required for functioning of panel board such as thimbles, glands, bolts, nuts, washers etc including supply and fixing of following accessories: - |
| 49 | INCOMING E21 : E23: -(a) Side operated 4 pole change over switch open execution type 4 pole 415 Volts 250 Amp - 01 Nos(b) MCCB 250 Amps, 4 pole, 35 KA DPX3 Cat No 422006 of Make Legrand or equivalent in makes as specified in Group - I of Appx 'F' - 01 Nos(c) Digital type Volt meter = Set 01.(d) Digital type ammeter with suitable CTs conforms to relevant IS specification - set 01.(e) LED type indicator lamp set of red, yellow and blue - Set 01.OUTGOING: -(a) MCCB 160 Amps, 4 pole, 25 KA DPX3 160 - 01.(b) MCCB 125 Amps, 4 pole, 25 KA, DPX3 160 - 01 Nos.(c) MCCB 63 Amps, 4 pole, 25 KA DPX3 160 - 01 Nos. |
| 50 | Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI wire 4mm dia through GI pipe 15mm dia light grade by means of bolts, nuts, check nuts and washers of galvanised iron or steel, with adequate quantity of charcoal and salt, proper watering arrangements including 20mm dia medium grade GI tubing PCC chamber, chamber cover all as shown in electrical plate No 3 of SSR Part - I 2020 connected to earthing test point all as specified or indicated and testing on completion. The end point connection of earthing will be carried out with the help of GI bolt grouted and washer and nut complete all as specified and as directed. |
| 51 | GI pipe 80mm dia \\"light grade\\" ISI marked, laid in trenches/ on floors/ on pole/ road for cable protection including necessary joints/ fittings including taking up/ down and removing old unserviceable GI pipe complete all as specified and as directed. |
| 52 | Description all as per Ser item No 50.00 here-in-before but 40mm dia complete all as specified and as directed. |
| 53 | Supply and fixing in replacement for Decorative Post top lantern light 20 watt for 360° indirect light with IP 65 protection, resistant to impact and corrosion. Glare-free and better uniformity including fixing of the light on suitable GI pipe upto minimum 2.5 feet above GL including necessary PCC work with proper connection and wiring from nearest junction box complete all as specified and as directed. |
| 54 | Supply and fixing in replacement LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optices complete with IP-65/66 protection complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender