Tender For Provn Of Main Receiving Station (Mrs) 66 Kv Of Sector B At Patiala Mil Station
Tender Value
10.98 Crore
Estimated cost
Bid Submission
26 Oct 2026
31 days left
EMD
8.74 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Main Receiving Station (Mrs) 66 Kv Of Sector B At Patiala Mil Station
BOQ
| Sl. No. | Item Description |
| 1 | Total amount of Sch 'A' Sec-I (BUILDING WORKS) Lump sum price worked out by the contractor for \\" BUILDING WORKS \\" as listed in Schedule 'A' Section-I |
| 2 | Total amount of Sch 'A' Sec-II (SITE CLEARANCE, SITE DEVELOPEMENT & MISC. EARTH WORKS) Lump sum price worked out by the contractor for \\" SITE CLEARANCE, SITE DEVELOPEMENT & MISC. EARTH WORKS \\" as listed in Schedule 'A' Section-II |
| 3 | Total amount of Sch 'A' Sec-III (INTERNAL ELECTRIFICATION WORKS) Lump sum price worked out by the contractor for \\" INTERNAL ELECTRIC SUPPLY \\" as listed in Schedule 'A' Section-III |
| 4 | Total amount of Sch 'A' Sec-IV (INTERNAL WATER SUPPLY ) Lump sum price worked out by the contractor for \\" INTERNAL WATER SUPPLY \\" as listed in Schedule 'A' Section-IV |
| 5 | Total amount of Sch 'A' Sec-V (SEWAGE DISPOSAL WORKS) Lump sum price worked out by the contractor for \\" SEWAGE DISPOSAL WORKS \\" as listed in Schedule 'A' Section-V |
| 6 | Total amount of Sch 'A' Sec-VI (ROAD, PATH AND CULVERT WORKS) Lump sum price worked out by the contractor for \\" ROAD, PATH AND CULVERT WORKS \\" as listed inSchedule 'A' Section-VI |
| 7 | Total amount of Sch 'A' Sec-VII (AREA DRAINAGE WORKS) Lump sum price worked out by the contractor for \\"AREA DRAINAGE WORKS \\" as listed in Schedule 'A' Section-VII |
| 8 | Total amount of Sch 'A' Sec-VIII (FENCING WORKS ) Lump sum price worked out by the contractor for \\" FENCING WORKS \\" as listed in Schedule 'A' Section-VIII |
| 9 | Total amount of Sch 'A' Sec-IX (EXTERNAL WATER SUPPLY WORKS) Lump sum price worked out by the contractor for \\"EXTERNAL WATER SUPPLY WORKS \\" as listed in Schedule 'A' Section-IX |
| 10 | Total amount of Sch 'A' Sec-X ( EXTERNAL ELECTRIFICATION WORKS) Lump sum price worked out by the contractor for \\" EXTERNAL ELECTRIFICATION WORKS \\" as listed in Schedule 'A' Section-X |
| 11 | Schedule 'A' Section-XI (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as \\"Rs 0.00\\" under Col. 5 siginifies this fact only. |
| 12 | AREA DRAINAGE WORKS70 mm thick SFRC factory made drain covers with perforations, manufactured from M-30 grade concrete with uniformly dispersed high strength steel fibres, with and including MS frame of flat iron minimum 1.25 mm thick, complete all as specified and directed. |
| 13 | FENCING WORKSAluminium profile sheet cladding for gates etc., manufactured from high quality aluminium alloy (AA 3003/ 3105) suitable for exterior application, of approved profile & colour, minimum 1.2 mm thick, polyester powder coated/ PVDF coated (Minimum 60-80 micron powder coating), including cutting, fitting, with and including fixed to the supporting frame with stainless steel self drilled screws or other approved fasteners, complete all as specified and directed. |
| 14 | EXTERNAL WATER SUPPLY WORKS |
| 15 | Cutting existing upto 150 mm bore cast iron water mains atleast at two places in position for inserting new tee and inserting cast iron tee of size 150mmx150mmx80mm including provision of connecting pieces and other fittings as required including run lead/ flanged joints etc., complete all as specified and directed. |
| 16 | Construction of brick masonary valve pit of size 900 mm x 900mm x 900 mm (Internal size), thickness of walls shall be 23cm in brick work in cement mortar 1:6 internally plastered in cement mortar (1:6) and externally plastered in cement mortar (1:4) over 15cm thick PCC 1:4:8 type D-2 in foundation having 15cm offset around, including 4 cm thick coping in PCC 1:2:4 type B-1 on the top of the brick wall and 3mm thick mild steel sheet cover and angle iron frame of size 40 mm x 40mm x 6mm including provn of suitable hold fasts to hold the frame, locking arrangement and lifting handle, duly painted with two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed. |
| 17 | INTERNAL WATER SUPPLY WORKSCP wall mounted basin spout and operating lever quarter turn consisting of exposed part and concealed part, suitable for 15 mm bore pipe, complete all as specified and directed. |
| 18 | INTERNAL ELECTRIFICATION WORKS |
| 19 | Concealed point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, FRLSH, PVC insulated and sheathed cable 1100 volts grade, ISI 694 marked,multi stranded copper conductor including PVC concealed conduit medium grade ISI marked 20 mm dia with all its fittings,PVC junction boxes etc, modular GI metal sunken/flush boxes of thickness not less than 1.2 mm of any modules from 1 to 18 modules with inner and outer modular cover plates and blank plates, including FRLSH, rigid PVC insulated unsheathed stranded copper conductor 1.5 Sq. mm (nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed, for the following: -Notes:- (i) Cutting/chasing of wall etc. deemed to be included in quoted amount. (ii) Modular GI metal flush/sunken Box along with modular base/front cover plate are inclusive in the item . (iii) Only switches,sockets and fan regulators shall be measured and paid separately. |
| 20 | One light/exhaust fan point controlled by one, 1- way switch |
| 21 | One fan point controlled by one,one way switch through fan regulator |
| 22 | One socket outlet point 6 Amps on same board |
| 23 | One socket outlet point 6 Amps on independent board |
| 24 | Concealed point wiring using approved colour coding as per IS, with stranded copper conductor 2.5 Sq. mm (nominal area), single core,Flame retardant low smoke and low halogen FRLSH, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 ,marked in multi stranded copper conductor including PVC cconduit medium grade ISI marked 20 mm dia with all its fittings,PVC junction boxes etc, modular GI metal sunken/flush boxes of thickness not less than 1.2 mm of any modules from 1 to 18 modules with inner and outer modular cover plates and blank plates, including FRLSH, rigid PVC insulated unsheathed stranded copper conductor 2.5 Sq. mm (nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified, and directed by Engineer-in-Charge. Notes:- (i) Cutting/chasing of wall etc. deemed to be included in quoted amount.(ii) Modular GI metal flush/sunken Box along with modular base/front cover plate are inclusive in the item . (iii) Only switches and sockets shall be measured and paid separately. |
| 25 | RCBO-A Type ( SPN-2M) 32 Amps 30 mA (in accordance with IS 12640-2 & IEC 61009-1) 240V/415V, 50 Hz, with 10kA short circuit capacity, RCBO is designed for use in domestic, commercial andindustrial distribution systems at the most downstream circuit for ensuring protection from leakage current, short circuit & overload to the user for a particular circuit. In normal use, it is safe to use and free of threat to user as well as to environment complete all as specified and directed. |
| 26 | Energy saving LED light fitting, 1 x20 watt, 230 volts, decorative ultra slim linear LED lighting fixture with extruded ploycarbonate, enviormental friendly, energy efficient ready to use pack, with electronic driver and with best quality diffuser high lumen output, 2.5 KV voltage surge protection, PF0.98, THD<10% suitable for surface/ pendant mounting complete with all accessories including and connecting of with twin core of PVCinsulated 0.75 Sqmm copper conductor cable complete all as specified and directed. |
| 27 | LED bulb 7/10 watt, 230 volts, AC 50 Hz, Retrofit B22 base for lamp holder, complete all as specified and directed. |
| 28 | Energy saving new generation energy saving and enviormental friendly long life LED building security light 1x 35 watts made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bend to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twim core from ceiling rose to light fittings complete all as specfied and directed. |
| 29 | EXTERNAL ELECTRIFICATION WORKS Please Enable Macros to View BoQ information |
| 30 | EXTERNAL ELECTRIFICATION WORKS Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 31 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender