Tender For Addn/Altn To Guest Room No 1 And 2 At Dgrr Mess At Pratap Chowk, Provn Of Cupboard, Bunk Beds And Centralized Cooling System In Or Living Barrack At repair renovation Officer Transit Facility, Provn Of View Cutter In Front Of Guest Room At
Tender Value
34.38 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
20 days left
EMD
68780
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn To Guest Room No 1 And 2 At Dgrr Mess At Pratap Chowk, Provn Of Cupboard, Bunk Beds And Centralized Cooling System In Or Living Barrack At repair renovation Officer Transit Facility, Provn Of View Cutter In Front Of Guest Room At Officer Transit Facility, Provn Of Hot And Cold Ac And Refrigerator At Office Of repair renovation Cell (Dgrr) And Re-Location Of Water Storage Tanks At repair renovation Officers Transit Facility Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil, complete all as specified and as directed. |
| 2 | Excavating in trenches not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and as directed. |
| 3 | M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as foundation filling in mass concrete, complete all as specified and directed. |
| 4 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and as directed. |
| 5 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and as directed. |
| 6 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and as directed. |
| 7 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, complete all as specified and as directed. |
| 8 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide, complete all as specified and as directed. |
| 9 | M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for bases for columns, etc. all as specified and directed. |
| 10 | Description all as per item No 9.00 but 8mm dia as in stirrups, complete all as specified and as directed. |
| 11 | M&L for reinforced cement concrete M-25 (Design mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 12 | M&L for reinforced cement concrete M-25 (Design mix) as in Columns, pillars, piers, posts and struts etc. all as specified and directed. |
| 13 | M&L for reinforced cement concrete M-25 (Design mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc. all as specified and directed. |
| 14 | M&L for reinforced cement concrete M-25 (Design mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, chhajja, deck slabs and in shelves and the like etc. all as specified and directed. |
| 15 | Providing and applying the plaster with single component ready to use Polymer modified repair mortar capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer (@ 10% of cement weight) modified cementious bond coat @2.2 kg cement/Sqm of surface area including taking down existing roof treatment of any type with cement plaster on brick/concrete surfaces, including raking out joints, haking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. Make: Smart Care (Asian Paints) or equivalent in Sika/ Fosroc/ Berger/ STP. Note: The application shall be executed on any type of surface and on horizontal/Vertical areas. |
| 16 | M&L for APP based polymeric membrane with mineral granules on top surface, minimum weighting 3 kg/Sqm and minimum 3 mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm with bitumen primer and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.6 kg/sqm at overlapping joints with a over lap of 75mm at the sides and 100 at the ends complete all as specified. Note: the water proofing treatment shall be carried out by the manufacturer or their authorised applicators.\\" Make-Asian/ STP/ IWL |
| 17 | M & L for ceramic cool roof glazed Heat Resistant Terrace Tiles (300 mm x 300 mm x 10mm) on waterproof and sloped surface of terrace, laid over and incl 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement: 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, complete all as specified. Make Johnson/ Orient bell or equivalent |
| 18 | M&L for Brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1:6, complete all as specified and directed. |
| 19 | Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed. |
| 20 | Removing excavated matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed. |
| 21 | M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed. |
| 22 | M&L for 75mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified. |
| 23 | M&L for hardcore of broken bricks of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 24 | M & L for Vitrified coloured tiles light shade 8-10mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm but not exc 1.00 sqm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. |
| 25 | M&L Rendering 15 mm thick in cement mortar 1:4 on fair face of brick work/ concrete surfaces with water proofing admixture finished even and smooth without using extra cement complete all as specified and directed. |
| 26 | PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in brenching for manholes, bands, coping, bed plate etc with slightly chamfered or rounded angles including necessary from work, if any, and finishing exposed surface even and smooth without using extra cement complete all as specified & directed. |
| 27 | M&L Rendering 5mm thick in cement mortar 1:3 as in ceiling finished even and smooth without using extra cement to match with existing surface complete all as specified and directed. |
| 28 | M&L Rendering 15 mm thick in cement mortar 1:6 on fair face of brick work/ concrete surface, finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) any type and size exc. 1.5 Sqm but not exc. 4.00 Sqm each complete all as specified and directed. |
| 30 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) any type and size not exc. 1.5 Sqm each complete all as specified and directed. |
| 31 | S & F for Factory made UPVC (white/Off White colour casement (Openable) Door made of extruded profile members with wall thickness of 2.3mm +0.2mm) profile members with hollow section with multi chamber. Frame (60mm x 60mm), sash bars (60mm x 110mm). T-profile (One vertical length in between two shutters 60mmx 74mm). Glazing head (35mmx 20mm) will be mitered cut and fusion welded at all corners, including making of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket 1.2, 1 +0.02mm thick galvanised steel frame (28mmx21.50mm), sash bars (31mmx27mm). T-profile (27x17mm) to be inserted in required profile frame and will be fixed to wall 8mm x 100mm long fasteners. Hardware: casement door handle made of zinc alloy (white powder coated), Corner striker, Secondary Strikers, Cylinder, Door transmission gear made of mild steel with multi point locking system with striker, Hinges of zinc alloy (white powder coated) and 6 mm thick glazing with selected quality glass, complete all as specifed and as directed. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 32 | S & F for Factory made UPVC (white/Off white colour sliding window three track made out of extruded profiles with wall thickness of members as 2.3mm (1+0.2mm). Window profile with hollow section with multi chamber frame (60mm x 62mm). sash bars (42mm x 67mm). Sliding inter lock (one in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1+0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fastners. Hardware: Touch lock to be of Zinc alloy (white powder coated), Steel roller system including 5mm thick glazing with selelcted quality glass, Aluminium track on bottom rail to be of hree track sliding frame, wool pine for sliding sash and interlock, complete all as specified and as directed. complete all as specifed and as directed. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 33 | Description all as per item no 32.00 above but wire mesh door shutter all as per specification. |
| 34 | M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including 2mm thick wall care putty complete all as specified and as directed. |
| 35 | M & L for preparing newly plastered surfaces of wall incl preparation of surfaces and applying two coats of acrylice emulsion over a coat of interior primer and 2-3mm wall care putty (JK or Birla) on wall surfaces complete as specified and directed. |
| 36 | Description all as per item no 35.00 above but in ceiling, complete as specified and directed. |
| 37 | S & F plain gypsum board panel 12 mm thick on false ceiling (including any design/cob design as required & pattern as approved by GE) with and including necessary Gl frame work for seamless ceiling used with 'T', channel or any section including screws, cleats, fasteners, clips and all required accessories, hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc. complete all as specified and directed. |
| 38 | M & L for Vitrified coloured tiles light shade 8-10mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm but not exc 1.00 sqm each in floors/skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, after dismantling of existing tiles complete all as specified and as directed. |
| 39 | M&L for 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and incl 10mm thick screed bedding layer in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed. |
| 40 | Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc. to store and rubbish not exc. 50m, complete all as specified and as directed. |
| 41 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and rendering in cement mortar (1:4) to match existing work, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 42 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and rendering in cement mortar (1:4) to match existing work, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender