Tender For Special Repairs For Replacement Of Existing Ci Pipeline With Di Pipeline, Valve Pit Chambers And Connected Works At City Area, Military Station Alwar Under Ge Alwar.
Tender Value
46.65 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
20 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs For Replacement Of Existing Ci Pipeline With Di Pipeline, Valve Pit Chambers And Connected Works At City Area, Military Station Alwar Under Ge Alwar.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for supply, laying, jointing and testing in replacement centrifugally cast (spun) ductile iron pressure pipe, 150 mm dia, socket and spigot ended, Class K-7, ISI marked, conforming to IS 8329, suitable for working pressure as specified, internally cement mortar lined, complete with approved rubber gasket push-on joints and all specials/fittings, laid in trenches/under floors including alignment, cutting, jointing, testing and making good complete all as specified and directed. |
| 2 | S&F in replacement sluice valve, 150 mm dia, PN 1.6, with brass spindle and hand wheel, conforming to IS 14846, complete with suitable bolts, nuts, washers, rubber gasket, flanged connections and all accessories, fixed, tested and commissioned complete all as specified and directed. |
| 3 | M&L for cutting existing 150 mm dia DI pipe line and inserting CI unequal/reducer tee suitable for taking off branch up to 100 mm dia, including required flanges, bolts, nuts, washers, rubber gaskets, connection to GI pipe of required size and all specials/fittings, cutting, jointing, testing and making good complete all as specified and directed. |
| 4 | M&L for construction of valve chamber, internal size 1.20 x 1.20 metre and 1.00 metre deep, comprising excavation, PCC bed, brick masonry walls, cement plaster/rendering as required and heavy duty MS sheet cover with frame and lifting arrangement, including making pipe openings and making good, complete all as specified and directed. |
| 5 | M&L in replacement galvanised steel water tubing, medium grade, 50 mm bore, conforming to relevant IS, with and including all fittings, specials, unions/flanges, jointing material and clamps/supports as required, laid in trenches, tested for leakage and commissioned complete all as specified and directed. |
| 6 | M&L in replacement galvanised steel water tubing, medium grade, 80 mm bore, conforming to relevant IS, with and including all fittings, specials, unions/flanges, jointing material and clamps/supports as required, laid in trenches, tested for leakage and commissioned complete all as specified and directed. |
| 7 | M&L in replacement galvanised steel water tubing, medium grade, 100 mm bore, conforming to relevant IS, with and including all fittings, specials, unions/flanges, jointing material and clamps/supports as required, laid in trenches, tested for leakage and commissioned complete all as specified and directed. |
| 8 | S&F in repairs gunmetal gate valve, 50 mm bore, screwed both ends for iron pipe, complete with iron wheel head, spindle, gland packing, seating and all internal components, ISI marked, including taking down, overhauling/replacing defective components, refixing, testing and making valve leak-proof complete all as specified and directed. |
| 9 | S&F in repairs gunmetal gate valve, 80 mm bore, screwed both ends for iron pipe, complete with iron wheel head, spindle, gland packing, seating and all internal components, ISI marked, including taking down, overhauling/replacing defective components, refixing, testing and making valve leak-proof complete all as specified and directed. |
| 10 | Excavation in trenches n exc 1.50 metre wide and n exc 1.50 metre deep for foundations or laying pipes/cables etc., in any type of soil/strata, including getting out excavated material, dressing sides and bottom and necessary dewatering where encountered, complete all as specified and directed. |
| 11 | Returning, filling in excavated earth including spreading, levelling, watering and well ramming in layers n exc 250 mm thick in soft/loose soil, complete all as specified and directed. |
| 12 | Removing surplus excavated soil/material to a distance n exc 50 metres and depositing where directed at a level n exc 1.50 metre above starting point, including loading, carriage, unloading and spreading, complete all as specified and directed. |
| 13 | M&L for carrying out trial bore hole 150 mm dia in any type of strata for assessing suitability of proposed bore well location, including drilling to required depth, recording strata encountered, furnishing graphical bore log and strata particulars and, if bore is found unsuitable, filling/closing the bore hole as directed, complete all as specified and directed. Rate shall be deemed to include hydrogeological survey for availability/feasibility of groundwater through competent agency and submission of recommendation/report prior to execution. |
| 14 | M&L for drilling bore well of 250 mm dia by rotary/ODEX system in hard rock/disintegrated rock to required depth till suitable water-bearing strata is encountered, including all drilling plant, casing during drilling, removal of sludge/cuttings, flushing, bore log and all incidental operations, complete all as specified and directed. |
| 15 | All as per preceding item but drilling 250 mm dia bore well in hard rock by DTH system to required depth till suitable water-bearing strata is encountered, including complete drilling operation, flushing, bore log and all incidental works, complete all as specified and directed. |
| 16 | S&F, assembling, jointing, lowering and fixing in position ERW MS casing pipe, 200 mm dia, minimum 5.4 mm thick, ISI marked, up to required depth below ground level in all strata, including cutting, welding, alignment, anti-corrosive painting of exposed portions, MS well cap and all accessories including taking down existing pipe, complete all as specified and directed. Make: TATA / Swastik / Jindal / Prakash or equivalent approved by GE. |
| 17 | S&F, assembling, jointing, lowering and fixing ERW MS slotted pipe, 200 mm dia, minimum 5.4 mm thick, having slots 1.59 mm wide x 75 mm long, positioned as per approved bore/strata chart, including cutting, welding, alignment, lowering and all connected accessories including taking down existing pipe complete all as specified and directed. |
| 18 | M&L for development of tube well by compressed air using compressor of minimum 150 PSI and 450 CFM capacity, including surging, flushing and development till water is substantially free from sand/silt, complete all as specified and directed. Rate shall include yield test by continuous pumping to determine safe pumping yield and submission of detailed yield test report; testing of water for potability, TDS, physical, chemical and bacteriological parameters from Government/NABL accredited laboratory; and submission of complete test reports before commissioning. |
| 19 | S&F housing clamp, 900 mm long x 200 mm wide, fabricated from 6 mm thick MS plate, suitable for 200 mm dia casing pipe, complete with MS bolts, nuts and washers, fixed at ground level and embedded in PCC 1:2:4 Type B-1 using 20 mm graded stone aggregate, complete all as specified and directed. |
| 20 | M&L for strata sample box fabricated from second class hardwood such as Hollock/Bijasal, size 400 x 300 x 200 mm, suitably compartmented and labelled for preservation of representative strata samples collected during boring, complete all as specified and directed. |
| 21 | M&L in replacement 50 mm bore GI medium grade column pipe in 6 metre lengths with flanged joints, suitably screwed and welded, suspended in deep well, complete with slot for lead, GI flanges, rubber gaskets, clamps, bolts, nuts and all accessories required for lowering, supporting and connecting submersible pump set, complete all as specified and directed. |
| 22 | S&F in replacement non-return valve, 80 mm bore, horizontal heavy duty type, CI body, flanged ends and drilled, ISI marked, complete with suitable jointing material, bolts, nuts, washers and rubber gaskets, suitable for submersible pump delivery line, fixed, tested and commissioned complete all as specified and directed. |
| 23 | S&F in replacement sluice valve, 80 mm dia, PN 1.6, cast copper alloy, complete with spindle, operating arrangement, flanged/suitable connections, bolts, nuts, washers and jointing material, fixed, tested and commissioned complete all as specified and directed. |
| 24 | S&F, installing, testing and commissioning electric driven submersible pump set, 3 phase, 415 Volt, 50 Hz, discharge up to 14,000 litres/hour at 180 metre head, 18 stage, motor rating n less than 15 HP, complete with submersible motor, pump assembly, cable connection, coupling and all standard accessories necessary for satisfactory operation including taking down existing submersible pump set complete all as specified and directed. Make: KSB / Kirloskar / Crompton Greaves or equivalent approved by GE. Manufacturer’s performance curve and routine test certificate for pump/motor shall be submitted before installation. |
| 25 | S&F, installing, testing and commissioning (in replacement) factory-made outdoor LT panel kiosk, fabricated from 3 mm thick CRCA sheet, powder coated, CPRI approved/type tested, dust and vermin proof, mounted on MS angle iron frame 40 x 40 x 6 mm at 450 mm above ground level, with 200 Amp copper bus bars, front openable lockable arrangement and complete internal wiring, glands, lugs, earthing and accessories, comprising 100 Amp, 35 kA, 4 Pole MCCB – 1 No.; 63 Amp TPN, 16 kA MCB – 1 No.; fully automatic star-delta starter suitable for 15 HP, 3 phase motor – 1 No.; digital ammeter with selector switch and suitable CT, 0–50 Amp – 1 No.; digital voltmeter with selector switch, 0–500 Volt – 1 No.; single phasing preventer – 1 No.; phase sequence corrector suitable for 15 HP motor – 1 No.; LED indication lamps RYB – 3 Nos; suitable copper conductor internal wiring; and 3 kVAR, 3 phase power factor correction capacitor – 1 No., complete all as specified and directed. MCCB/MCB make: ABB / Legrand / L&T; starter make: L&T / Havells / AE; phase protection make: Havells / ABB / L&T / BCH / C&S; capacitor make: Legrand / ABB / EPCOS or equivalent approved by GE. Panel shall be supplied with routine factory test report, bus-bar/current rating certificate, IP/type-test report as applicable, schematic diagram and manufacturer’s warranty. |
| 26 | S&F in repair1100 Volt grade flat submersible cable, 3 core, 10 Sqmm stranded copper conductor, in two runs, one run from starter to pump and one return/associated run as specified, fixed to column pipe with suitable non-corrosive clamps at regular intervals, including jointing/termination material, cable lugs, sealing arrangements and testing for insulation resistance and continuity complete all as specified and directed. |
| 27 | M&L in replacement for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground in earth pit n less than 2.25 metre deep, top edge of plate n less than 1.50 metre below normal ground level, connected to galvanised steel earth strip 25 x 4 mm up to test point by GI/steel bolts, nuts, check nuts and washers, complete with PCC earth pit/chamber, CI cover, GI funnel with wire mesh, 40 mm dia GI protective pipe for earth lead, 20 mm dia GI watering pipe, charcoal and common salt, excavation and earthwork in any type of soil, including testing on completion and recording earth resistance, complete all as specified and directed. Earth resistance test report shall be jointly recorded before commissioning. |
| 28 | M&L for cement concrete Type B-2, 1:2:4, using approved graded stone aggregate, in foundation, filling and mass concrete, including required formwork, finishing, curing and sealing/bacteriological treatment of bore well head/surface as required, complete all as specified and directed. |
| 29 | S&F in repair digital water flow meter, 80 mm bore, heavy duty type, CI body, flanged ends and drilled, ISI marked, suitable for submersible pump delivery system, complete with display unit, sensors/electronics, batteries/power arrangement as applicable, jointing material, flanges, bolts, nuts, washers and gaskets, fixed, calibrated, tested and commissioned complete all as specified and directed. Manufacturer’s calibration/test certificate shall be submitted before acceptance. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender