Tender For Special Repairs To Roof Of Bldg No. P-711 And Special Repairs To Bldg No. Kp-01/01 To 03 And Kp-05/01 To 04 (Civilian Govt Married Accommodation For Key Persons) Of Ge Alwar At Mil Stn, Alwar
Tender Value
33.83 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
13 days left
EMD
68000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Roof Of Bldg No. P-711 And Special Repairs To Bldg No. Kp-01/01 To 03 And Kp-05/01 To 04 (Civilian Govt Married Accommodation For Key Persons) Of Ge Alwar At Mil Stn, Alwar
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick/stone masonry built in cement/lime mortar of any mix, including quoins, pillars and ashlar masonry, and removing debris complete all as specified and directed. |
| 2 | Demolition of cement concrete, unreinforced, as in ground floors and paving exc 15 cm thick, below or above ground level, including removal of debris complete all as specified and directed. |
| 3 | Dismantling stone slabs and tiles of any description or thickness as in floors, aprons and the like, laid, bedded and pointed in any mortar, including removing dismantled materials complete all as specified and directed. |
| 4 | Taking down chowkhats or frames together with shutters, without taking off shutters from frames, area n exc 1.50 Sqm each, and removing to store complete all as specified and directed. |
| 5 | Taking down chowkhats or frames together with shutters, without taking off shutters from frames, area exc 1.50 Sqm but n exc 4.00 Sqm each, and removing to store complete all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and debris off the premises complete all as specified and directed. |
| 7 | Taking down cement/cement-lime plaster of any description from brick/stone wall surfaces, including raking out joints, hacking surfaces for key and scrubbing down with water complete all as specified and directed. |
| 8 | Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed. |
| 9 | Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed. |
| 10 | Dismantling/demolition water tank of capacity exc 250 litres but n exc 500 litres, including disconnecting and removing from site complete all as specified and directed. |
| 11 | Dismantling/demolition water tank of capacity n exc 1000 litres, including disconnecting and removing from site complete all as specified and directed. |
| 12 | Dismantling 75 mm bore PVC (SWR) drain pipe together with fittings and accessories, including taking out from walls, floors or trenches as required and removing dismantled materials complete all as specified and directed. |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, including cutting/disconnecting where necessary, complete all as specified and directed. |
| 14 | Dismantling 100 mm bore PVC (SWR) drain pipe together with fittings and accessories, including taking out from walls, floors or trenches as required and removing dismantled materials complete all as specified and directed. |
| 15 | M&L for brickwork with fly ash bricks, old size, conforming to IS 13757, straight or curved on plan exc 6 metre mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 16 | M&L for half-brick thick brickwork with fly ash bricks, old size, conforming to IS 13757, straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified and directed. |
| 17 | S&F solid PVC door frame 50 x 47 mm made out of 5 mm thick plain coloured PVC sheet reinforced with MS square tube, including necessary fixing in openings complete all as specified, shown on drawings and directed. |
| 18 | S&F factory-made solid PVC moulded door shutter 28 to 30 mm thick, 2/4/6 raised-panel design, comprising 2 mm thick moulded pre-laminated PVC sheet on front face and 2 mm thick plain coloured PVC sheet on rear face, including necessary fixing to frame complete all as specified and directed. |
| 19 | S&F factory-made single-extruded WPC (Wood Polymer Composite) solid decorative flush door shutter, 30 mm thick, comprising virgin polymer of K-value 58–60 (suspension grade), calcium carbonate, natural fibres and non-toxic additives having maximum toxicity index 12 for 100 g, minimum density 650 Kg/Cum, screw withdrawal strength n less than 1800 N on face and 900 N on edge, compressive strength n less than 50 N/Sqmm, modulus of elasticity n less than 850 N/Sqmm and resistance to spread of flame of Class-A category, termite/borer proof, water/moisture resistant and fire retardant, laminated on both faces with PVC foil of approved design using hot-melt adhesive and fixed with full-body threaded star-headed countersunk stainless-steel screws complete all as specified and directed. Note: Stainless-steel butt hinges shall be measured and paid separately. |
| 20 | S&F factory-made single-extruded WPC solid frame/chowkhat, 65 x 100 mm, for doors/windows/clerestory windows and the like, comprising virgin PVC polymer of K-value 58–60, calcium carbonate, natural fibres and non-toxic additives having maximum toxicity index 12 for 100 g, fabricated with mitred joints using PVC solvent cement and full-body threaded star-headed SS screws, having minimum density 750 Kg/Cum, screw withdrawal strength n less than 2200 N on face and 1100 N on edge, compressive strength n less than 58 N/Sqmm, modulus of elasticity n less than 900 N/Sqmm and Class-A resistance to spread of flame, termite/borer proof, water/moisture resistant and fire retardant, fixed with and including MS holdfasts/lugs or SS dash fasteners of required size complete all as specified and directed. |
| 21 | S&F gauzed shutter of mild-steel framed work fabricated from hollow/square/rectangular/circular sections, including gussets, rails, braces, hooks, hinges, fittings, mortice lock where specified, welding, bolting, hanging, fastening and fixing complete all as specified and directed. Note: Wire cloth shall be measured and paid separately. |
| 22 | S&F in repairs galvanised mild-steel wire cloth of 0.56 mm nominal dia wire and average width of aperture 1.18 mm, fixed with tinned tacks/GI wire staples/nails/screws complete all as specified and directed. |
| 23 | S&F ordinary quality sheet glass 4.8 mm thick in panes n exc 0.50 Sqm each, including glazing and fixing complete all as specified and directed. |
| 24 | S&F stainless-steel butt hinges 100 mm long, medium weight, including necessary SS screws complete all as specified and directed. |
| 25 | S&F stainless-steel D-type handle 150 mm long, including necessary screws complete all as specified and directed. |
| 26 | S&F stainless-steel barrel tower bolt 150 mm long, extruded section, including necessary screws complete all as specified and directed. |
| 27 | S&F stainless-steel sliding door bolt 300 mm long with hasp, staple, fixing clips and necessary fixing accessories complete all as specified and directed. |
| 28 | S&F stainless-steel floor door stopper 150 mm long with body, tongue and hard-drawn steel spring, fixed to floor complete all as specified and directed. |
| 29 | M&L for framed steelwork as in doors/gates comprising angles or other sections with gusset plates, rails, braces and the like, drilled for fixing steel sheeting or other covering, prepared for hanging/sliding, including hooks, hinges or steel hanging door fittings, welding, bolting, fastening, hanging and fixing, and making good disturbed floor in PCC 1:2:4 Type B-0 to match existing complete all as specified and directed. Steel sheeting/other covering, running rails and guides shall be measured separately where applicable. |
| 30 | M&L for flat iron as in holdfasts, hooks, cleats and the like welded to steel door/window frames complete all as specified and directed. |
| 31 | S&F powder-coated aluminium frames and other sections as in doors, windows, ventilators and partitions, with one or more rebates, of approved colour, powder coating thickness n less than 50 microns, including joining cleats, screws, fasteners and necessary fixing accessories complete all as specified and directed. |
| 32 | S&F powder-coated aluminium window/ventilator shutters, side-hung type without sash bars, aluminium sections weighing 0.55 Kg/RM, powder coating thickness n less than 50 microns, including joining cleats, glazing clips, rubber packing, snap-on glazing beads, screws, peg stay 150 mm long, B-21 type hinges 100 mm long and suitable handle complete all as specified and directed. |
| 33 | M&L for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 34 | Cutting holes in brick/stone walls n exc half-brick thickness, built in cement mortar, for inserting holdfasts and making good disturbed portions in cement mortar 1:3 or PCC 1:2:4 Type B-1 as required complete all as specified and directed. |
| 35 | S&F in repairs stainless-steel curtain rod 20 mm dia, in lengths as directed, including decorative finials at both ends and pair of stainless-steel brackets fixed to walls/beams with rawl plugs and steel screws complete all as specified and directed. |
| 36 | M&L for PCC 1:2:4 Type B-0 using 12.5 mm graded stone aggregate, as in levelling course over roof, laid and compacted to minimum consolidated thickness of 25 mm and required slope n flatter than 1:30, finished to receive subsequent treatment complete all as specified and directed. |
| 37 | M&L for light-shade joint-free non-skid ceramic tiles, 7 to 8 mm thick, square/rectangular, area of each tile exc 0.06 Sqm but n exc 0.11 Sqm, as in floors and the like, set and jointed in neat cement slurry and pointed in white/coloured cement to match, over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 38 | M&L for light-shade vitrified ceramic tiles, 10 mm thick, square/rectangular, polished, area of each tile n exc 0.36 Sqm, as in floors and the like, set and jointed in neat cement slurry and pointed in white/coloured cement to match, over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 39 | M&L for light-shade vitrified ceramic tiles, 10 mm thick, square/rectangular, polished, area of each tile exc 0.36 Sqm but n exc 0.42 Sqm, as in vertical surfaces, dado, skirting and the like, set and jointed in neat cement slurry and pointed in white/coloured cement to match, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 40 | M&L for 75 mm thick PCC 1:3:6 Type C-1 using 20 mm graded stone aggregate as in plinth protection, laid to required line, level and slope and exposed surface finished fair and even without using extra cement complete all as specified and directed. |
| 41 | M&L for glazed ceramic coloured tiles, 450 x 350 x 7 mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white/coloured cement to match shade of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 42 | M&L for granite slab 18 to 20 mm thick of approved shade as in cooking platforms, window cills and the like, machine cut, bedded and jointed in grey cement slurry and pointed with white cement mixed with pigment to match shade of granite, including cutting and polishing, laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 43 | M&L for green marble 16 to 18 mm thick, table rubbed and polished, as in skirting, jambs, pillars, window cills, cooking platforms, staircase treads and the like, laid over and including 10 mm thick rendering in cement mortar 1:4 and pointed in white cement mixed with marble dust and pigment to match shade of marble complete all as specified and directed. |
| 44 | Demolition of reinforced cement concrete in roofs, floors other than ground floors, beams, staircases, landings, chajjas and similar suspended work, including cutting reinforcement where necessary and removing debris complete all as specified and directed. |
| 45 | M&L for RCC nominal mix 1:2:4 Type B-1 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns, floors, roofs, landings, balconies, canopies, kitchen slabs, shelves and the like, excluding reinforcement and formwork unless otherwise specified, complete all as specified and directed. |
| 46 | M&L for TMT reinforcement bars 10 mm dia and over, cut to required lengths and bent to shape, including cranking, bending spirally for hooping, hooking ends and binding with annealed mild-steel wire n less than 0.9 mm dia or securing with approved clips complete all as specified and directed. |
| 47 | M&L for 10 mm thick rendering in cement mortar 1:6 on brickwork/concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 48 | M&L for 15 mm thick rendering in cement mortar 1:4 on brick/concrete wall surfaces, finished even and smooth without using extra cement, complete all as specified and directed. Note: Integral waterproofing compound shall be measured and paid separately under relevant item. |
| 49 | Supply only approved integral waterproofing compound for cement concrete/cement mortar, conforming to relevant IS and manufacturer's specifications, delivered in manufacturer's sealed containers complete all as specified and directed. |
| 50 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete ceiling surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 51 | M&L for preparation of new plastered exterior wall surfaces and applying two coats of 100% premium acrylic exterior emulsion paint of approved shade, company-depot tinted, having VOC less than 50 gm/litre, UV resistance conforming to IS 15489, alkali, fungal and dirt resistance, with silicone additives, applied @ 1.43 litres/10 Sqm over and including one coat of exterior wall primer applied @ 0.90 litre/10 Sqm, complete all as specified and directed. |
| 52 | M&L for providing and applying minimum 1 mm thick wall-care putty over prepared wall surfaces to obtain an even and smooth surface ready to receive subsequent painting treatment, complete all as specified and directed. |
| 53 | M&L for complete removal of existing treatment from old stone/plastered wall surfaces, including cleaning and preparation, and applying two coats of 100% premium acrylic exterior emulsion paint of approved shade, company-depot tinted, having VOC less than 50 gm/litre, UV resistance conforming to IS 15489, alkali, fungal and dirt resistance with silicone additives, applied @ 1.43 litres/10 Sqm over and including one coat of exterior wall primer applied @ 0.90 litre/10 Sqm, complete all as specified and directed. |
| 54 | M&L for preparation of newly plastered wall surfaces and applying two coats of oil-bound distemper of approved shade/tint over and including 2 mm thick approved wall-care putty, complete all as specified and directed. |
| 55 | M&L for complete removal of existing treatment from old decorated wall surfaces, including cleaning off mortar droppings, smoke, soot, mould, moss, efflorescent salts, oil/grease spots and other foreign matter, and applying two coats of oil-bound distemper of approved shade/tint over and including 1 mm thick approved wall-care putty, complete all as specified and directed. |
| 56 | M&L for preparation of newly plastered wall surfaces and applying three coats of whitewash, complete all as specified and directed. |
| 57 | M&L for preparation of newly plastered/unplastered ceiling surfaces and applying three coats of whitewash, complete all as specified and directed. |
| 58 | M&L for brooming down old decorated wall surfaces, plastered or unplastered, including cornices and the like, and applying one coat of whitewash, complete all as specified and directed. |
| 59 | All as per preceding item for brooming down old decorated surfaces and applying one coat of whitewash, but on ceiling surfaces, complete all as specified and directed. |
| 60 | S&F medium grade galvanised steel tubing, 15 mm bore, with all fittings and connections, fixed to walls and/or laid in floors, fixed complete all as specified and directed. |
| 61 | S&F medium grade galvanised steel tubing, 20 mm bore, with all fittings and connections, fixed to walls and/or laid in floors, fixed complete all as specified and directed. |
| 62 | S&F in repairs PVC flexible connection pipe, 15 mm bore and 600 mm long, with adapters and washers at both ends, including necessary connections, complete all as specified and directed. |
| 63 | S&F rotationally moulded polyethylene water storage tank of nominal capacity 500 litres, cylindrical vertical closed-top type, manufactured from virgin food-grade polyethylene material, UV stabilised, non-corrosive, leak-proof and suitable for storage of potable water, conforming to relevant IS/manufacturer’s specifications, complete with moulded cover/manhole, threaded inlet, outlet, overflow and drain connections of required sizes, including necessary nipples, sockets, unions, washers, gaskets and other fixing accessories; including hoisting, lifting, placing, levelling and securely fixing the tank in position and testing the tank and connected fittings for leakage and satisfactory operation, complete all as specified in MES SSR, manufacturer’s instructions and as directed by Engineer-in-Charge. |
| 64 | S&F rotationally moulded polyethylene water storage tank of nominal capacity 1000 litres, cylindrical vertical closed-top type, manufactured from virgin food-grade polyethylene material, UV stabilised, non-corrosive, leak-proof and suitable for storage of potable water, conforming to relevant IS/manufacturer’s specifications, complete with moulded cover/manhole, threaded inlet, outlet, overflow and drain connections of required sizes, including necessary nipples, sockets, unions, washers, gaskets and other fixing accessories; including hoisting, lifting, placing, levelling and securely fixing the tank in position and testing the tank and connected fittings for leakage and satisfactory operation, complete all as specified in MES SSR, manufacturer’s instructions and as directed by Engineer-in-Charge. |
| 65 | S&F high-pressure brass ball valve with polyethylene float and fly-net arrangement, screwed for 15 mm bore iron pipe and fixed complete all as specified and directed. |
| 66 | S&F in repairs fancy type bib tap, 15 mm bore, chromium-plated cast copper alloy, with crutch/butterfly handle, screw-down high-pressure type, screwed for iron pipe/brass ferrule and fixed complete all as specified and directed. |
| 67 | S&F in repairs CP brass wall mixer for hot and cold water, screw-down type, suitable for 15 mm bore connections, including necessary unions and fixing complete all as specified and directed. Make: Jaquar Cat Part No. CON-219KN or equivalent approved. |
| 68 | S&F in repairs white vitreous china wash-hand basin, flat-back type, size 450 x 300 mm, fixed on and including new brackets, CP waste coupling and PVC waste pipe, including necessary connections complete all as specified and directed. |
| 69 | S&F in repairs fancy type concealed stop/angle valve, 15 mm bore, chromium-plated cast copper alloy, screw-down high-pressure type, screwed at both ends for iron pipe/unions and fixed complete all as specified and directed. |
| 70 | S&F in repairs kitchen mixer for hot and cold water, screw-down type, suitable for 15 mm bore pipe connections, including necessary unions and fixing complete all as specified and directed. |
| 71 | S&F gunmetal globe/gate valve, 20 mm bore, with iron wheel head, screwed at both ends for iron pipe and fixed complete all as specified and directed. |
| 72 | S&F PVC waste pipe, 32 mm bore, of required length for wash-hand basin/urinal/sink, including necessary connections complete all as specified and directed. |
| 73 | S&F soap dish of approved type fixed to plugs with chromium-plated brass screws complete all as specified and directed. |
| 74 | S&F corner glass shelf assembly comprising 5.5 mm thick sheet glass shelf, 120 mm wide, with chromium-plated brackets, guard and railing 600 mm long, including necessary fixing complete all as specified and directed. |
| 75 | S&F in repairs stainless-steel sink, 1 mm thick, kitchen/laboratory type, overall size 485 x 420 mm with bowl approximately 410 x 330 x 160 mm, including plugs, washers and waste fittings, bedding in cement mortar on dwarf wall or fixing on cantilever brackets and connecting waste to pipe complete all as specified and directed. |
| 76 | S&F in repairs bevelled-edge mirror, 600 x 450 mm, of selected-quality glass mounted on 6 mm thick AC building board/commercial plywood backing and fixed to wooden plugs with chromium-plated brass screws and cup washers complete all as specified and directed. |
| 77 | S&F in repairs white vitreous china squatting pan, Orissa pattern, size 580 x 440 mm, with integral footrests and P/S trap, including cement concrete bedding, connection to trap and flushing pipe and making good disturbed floor surfaces to match existing complete all as specified and directed. |
| 78 | S&F in repairs PVC low-level flushing cistern, 10 litre capacity, white, ISI marked, syphonic action type, complete with inlet ball valve, float, handle, brackets and 32 mm dia polyethylene/PVC flush pipe, fixed complete all as specified and directed. |
| 79 | S&F 15 mm bore CP wash-basin mixer, fancy swan-neck type, cast copper alloy, capstan head, screw-down high-pressure type, with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 80 | S&F in repairs chromium-plated brass shower rose, 125 mm size, with swivel joint, including connection to 15 mm bore steel pipe/union and fixing complete all as specified and directed. |
| 81 | S&F in repairs tubular towel rail, 20 mm dia, D-type, 600 mm long between flanges, chromium-plated brass, including brackets and necessary fixing complete all as specified and directed. |
| 82 | S&F stainless-steel plate rack fabricated from 1 mm thick stainless-steel sheet, size 900 x 900 x 250 mm, fixed to wall with rawl plugs and screws complete all as specified and directed. Make: Nirali or equivalent approved. |
| 83 | S&F PVC (SWR) pipe, 110 mm bore, single socketed, in any length, with rubber-ring joints, fixed to walls/floors including necessary fittings, clamps and jointing complete all as specified and directed. |
| 84 | S&F PVC (SWR) bend of any radius, 110 mm bore, including rubber-ring/approved joints as applicable, fixed complete all as specified and directed. |
| 85 | S&F PVC (SWR) vent cowl, 110 mm bore, fixed complete all as specified and directed. |
| 86 | S&F PVC (SWR) single junction (single tee), 110 mm bore, equal or unequal, including necessary jointing complete all as specified and directed. |
| 87 | S&F PVC (SWR) pipe, 75 mm bore, single socketed, in any length, with rubber-ring joints, laid/fixed in trenches, floors or walls, including taking down/removing existing old pipe and making good disturbed surfaces to match existing complete all as specified and directed. |
| 88 | S&F PVC (SWR) bend of any radius, 75 mm bore, including necessary jointing complete all as specified and directed. |
| 89 | S&F PVC (SWR) single junction (single tee), 75 mm bore, equal or unequal, including necessary jointing complete all as specified and directed. |
| 90 | S&F in repairs chromium-plated dome grating, 100 mm dia, minimum weight 25 grams, fixed with cement complete all as specified and directed. |
| 91 | S&F PVC (SWR) floor trap, 75 mm dia, plain type with grating, including jointing with approved solvent cement and necessary connections complete all as specified and directed. |
| 92 | S&F PVC (SWR) gully trap, 125/110 mm, including setting, fixing and jointing with approved solvent cement complete all as specified and directed. |
| 93 | Demolition of mud roof treatment of any thickness, including plaster and existing roof treatment, whether full thickness or part thereof, cleaning and preparing exposed surface to receive further treatment, taking down and removing debris/rubbish to a distance exc 1 km but n exc 1.5 km, complete all as specified and directed. |
| 94 | M&L for 15 mm thick screed in cement mortar 1:4 laid over green concrete surface, finished even and smooth without using extra cement, including incorporation of approved integral waterproofing compound as specified, complete all as specified and directed. Note: Integral waterproofing compound shall be measured and paid separately. |
| 95 | M&L for applying evenly a tack/bonding coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm over bituminous primer, including cleaning and preparation of surface complete all as specified and directed. |
| 96 | M&L for APP modified bituminous waterproofing membrane, minimum 3 mm thick and weighing n less than 3 Kg/Sqm, polyester non-woven reinforced with centre core/fabric weighing n less than 150 g/Sqm, laid over prepared and primed surface by torch application method in accordance with manufacturer's instructions, with side and end laps as specified, including two coats of reflective silver aluminium paint over finished APP membrane, complete all as specified and directed. |
| 97 | M&L for precast RCC 1:2:4 Type B-1 as in manhole/soak well/septic tank slabs, covers and the like, including necessary formwork, casting, curing, handling, setting and bedding in cement mortar 1:6 complete all as specified and directed. |
| 98 | M&L for framed steelwork as in grills, gratings, framed guard bars, barred iron doors, ladders, cooler stands, framed balusters, walkways, railings, framework of water tanks and similar work, with ends of bars shouldered/riveted or forged into spikes as required, conforming to Fe 290/E-165, including cutting, fabrication, welding/riveting and fixing complete all as specified and directed. |
| 99 | S&F mild-steel cupboard shutter with frame, Godrej pattern, fabricated from 22-gauge MS sheet, including chromium-plated MS handle and brass mortice lock, vertical type, 65 mm, 4-lever, complete with escutcheon plates and two keys, including preparation and applying two coats of synthetic enamel paint of approved tint over one coat of red oxide primer, fixed with 6 Nos 12 mm dia x 150 mm long bolts grouted into brickwork/concrete and making good disturbed surfaces to match existing complete all as specified and directed. Note: Measurement shall be taken on front elevation and not girthwise. |
| 100 | M&L for 75 mm thick PCC 1:4:8 Type D-2 using 40 mm graded stone aggregate as in sub-base, laid and compacted to required line and level complete all as specified and directed. |
| 101 | M&L for 25 mm thick sand cushioning under floors/paving, laid, watered, compacted and finished to required line and level complete all as specified and directed. |
| 102 | S&F machine-pressed precast concrete interlocking paver blocks of any approved shape and size, conforming to IS 15658, 60 mm thick, M-35 grade, manufactured with grey cement without pigment, laid to required line, level, slope and pattern over prepared sand cushioning, including cutting of blocks at edges and compacting complete all as specified and directed. Note: Sand cushioning shall be measured and paid separately. |
| 103 | M&L for PCC 1:4:8 Type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete, laid and compacted complete all as specified and directed. |
| 104 | M&L for plain cement concrete 1:3:6 Type C-1 using 12.5 mm graded stone aggregate as in precast/in-situ kerb blocks, set in cement mortar 1:4, including fair exposed faces, chamfered edges, weathering and throating where required, complete all as specified and directed. |
| 105 | M&L for rough-cast plaster to exterior wall surfaces comprising undercoat of cement mortar 1:3 n less than 10 mm thick and, while still plastic, application of rough-cast mixture consisting of crushed stone/fine gravel aggregate of size 6 to 12 mm, coarse sand and cement in the proportion 1:1:1, applied uniformly and finished even, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 106 | M&L for rough-cast plaster to exterior wall surfaces comprising undercoat of cement mortar 1:3 n less than 10 mm thick and, while still plastic, application of rough-cast mixture consisting of crushed stone/fine gravel aggregate of size 6 to 12 mm, coarse sand and cement in the proportion 1:1:1, applied uniformly and finished even, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender