Tender For special Repair Of Toilet Block Bldg No Np-35 (V Force Living), Np-36 (V Force Living), Np-37 (V Force Living), Np-38 (Dsc And Mco Living),Np-39 (31 Sub Area Living), Np-40 (31 Sub Area Living), Np-41 (P-Staff Living) Of 213 Transit Camp Un
Tender Value
46.80 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
6 days left
EMD
93600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Toilet Block Bldg No Np-35 (V Force Living), Np-36 (V Force Living), Np-37 (V Force Living), Np-38 (Dsc And Mco Living),Np-39 (31 Sub Area Living), Np-40 (31 Sub Area Living), Np-41 (P-Staff Living) Of 213 Transit Camp Under Ge Nagrotra
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (Unreinforced) of any despription and in any position not otherwise specifically provided complete all as specified and directed. |
| 2 | Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 3 | M & L for brick work with old size brick with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 4 | M&L for rendering 10mm thick in CM 1:4 on sunken slab surfaces with liquid water proofing compound @ 200 ml per bag finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M & L for applying a coat of bituminious primer conforming to IS 3384 on prepared surface of roof/ sunken slab after drying of primer apply APP (Atactic polypropylene) modified membrance 3mm thick and weight not less than 3.00 Kgs per Sqm with 160 GSM/Sqm non woven polyester mat as centre core reinforcement laid over a coat of bitumen 85/25 at the rate of 1.2 Kg per sqm with 75mm side over lap and 100mm end lap the membrane has to be laid with LPG tourch and over lap sealed and finished neat over sunken floor including APP membrane complete all as specified and directed by Engr-in-Charge. NOTE : S&F of APP based polimeric membrane of approved manufacturer will be laid/fixed by well-trained applicators as per manufacturer's instructions after obtaining written approval from the GE. |
| 6 | M&L for PCC 1:5:10 type E2 (40 mm graded crushed stone aggregate) Cement concrete as in sunken floor filling and mass concrete complete all as specified and directed. |
| 7 | Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing or removal to store complete all as specified and directed. |
| 8 | All as per Srl item no 7 above but 20mm bore complete all as specified and directed. |
| 9 | S&F 15 mm dia steel tubing medium grade, galvanized with all fitting such as bend, elbow, socket, tees and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc, for 15mm bore pipes complete all as specified and directed. |
| 10 | Refixing of old steel tubing 15mm dia and connections in new or old position (wall, ceiling, floor etc.) complete all as specified and directed. |
| 11 | S&F 20 mm dia steel tubing medium grade, galvanized with all fitting such as bend, elbow, socket, tees and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc, for 15mm bore pipes complete all as specified and directed. |
| 12 | Refixing of old steel tubing 20mm dia and connections in new or old position (wall, ceiling, floor etc.) complete all as specified and directed. |
| 13 | Taking down chowkhat or frames with shutter (without taking off shutter from the frame) area n exc 1.5 Sqm each complete with hold fasts etc. complete all as specified and directed. |
| 14 | S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 15 | S & F Factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as speciifed and directed. |
| 16 | Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water, at any description with necessary scaffolding of maximum height for G+3 Bldgs etc complete all as specified and directed. |
| 17 | M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed. |
| 18 | M & L for rendering 15mm thick in two layer (10mm+5mm) in cement mortar 1:4 on fair faces of brick work / concrete surfaces finished even and fair without using extra cement with WPC complete all as specified and directed.Note:- (i) Water proofing compound on only top layer of plaster (ie 5mm thick).(ii) Qty of WPC 200ml per cement Bag as per manufacturer instructions. (iii) WPC shall be measured and paid separately. |
| 19 | M&L for 5mm thick rendering in cement and sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces) finished even and smooth wihtout using extra cement, complete all as specified and directed. |
| 20 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 21 | M & L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of alkali resistance primer complete all as specified and directed. Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 22 | M & L preparation of new decorated surfaces of external walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 23 | M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 24 | M & L for preparation of old decorated surfaces of external walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 25 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by machinary only, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of Oil emulsion distemper on walls over 1 mm thick wall care putty complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 26 | M&L for complete removal of existing treatment preparing old plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 27 | M & L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 28 | M&L for glazed ceramic coloured tiles of size 350x250x7mm/450x350x7mm thick as on vertical surfaces such as wall, dado, skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and directed. |
| 29 | S & F in repair 100mm bore cast iron pipe, waste and vent pipes in any length with or without ears including jointing with cement joints, laid in trenches or in floors or in walls, complete all as specified and directed. |
| 30 | S & F in repair 75mm bore cast iron pipe, waste and vent pipes in any length with or without ears including jointing with cement joints, laid in trenches or in floors or in walls, complete all as specified and directed. |
| 31 | S & F in repair cast iron bends diminishing pieces or tapers including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), dia of outlet 100 mm bore complete all as specified and directed. |
| 32 | S & F in repair cast iron bends diminishing pieces or tapers including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), dia of outlet 75mm bore complete all as specified and as directed. |
| 33 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 34 | S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed. |
| 35 | S&F 150mm long aluminium handles cast type, anodised and fitted complete all as specified and directed. |
| 36 | S & F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 37 | S&F in repair PVC valveless, syphonic action type, flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed. |
| 38 | S&F in Chromium plated shower roses of 125 mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 39 | S & F Soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 40 | S&F in repair steel Grating doom 125 mm dia with waste hole complete all as specified and directed. |
| 41 | S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flage complete all as specified and directed. |
| 42 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 43 | S & F in repair 15 mm Stop valves / angle valve fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 44 | S &F in repair Bib taps 15 mm, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 45 | S & F in repair 15 mm Stop valves / angle valve fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed (concealed type) complete all as specified and directed. |
| 46 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 47 | S&F in repair of waste fittings 32 mm dia, brass, chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 48 | M&L for 50 mm dia GI tubing heavy greade galvanised laid over floors as a spout pipe in sunken floors complete all as specified and directed. |
| 49 | Dismantling cast iron /PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm complete all as specified and directed. |
| 50 | S&F cast iron floor trap, 75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 complete all as specified and directed. |
| 51 | S&F powder coated aluminium frame work (minimum thickness of powder coating 50 micron) for doors, windows, ventilators and partition, (sliding/openable/fix doors, windows, ventilators), etc with one, two or more rebates (required as per site), section weighing not less than 0.55 kg/m, including joining cleat for fixing with dash fasteners of required dia and size, including filling up gaps at junctions, ie top, bottoms and sides etc complete all as specified and directed. |
| 52 | S&F powder coated aluminium window and ventilator shutters, sliding/openable/fixed (as per required at site) including frame type without sash bar, aluminium section weighing 0.55 kg/m, including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed. |
| 53 | S&F for sheet glass palin/coloured (as per directed by Engr-in-charge) 5.5 mm thick best quality and glazing with rubber packing, screws or glass putty in squares exc 0.5 Sqm each pane complete all as specified and directed. |
| 54 | S & F Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples complete all as specified and directed. |
| 55 | S & F 600mm x 450mm size beveled edge mirror of 6mm thick selected quality mounted on 6mm thick plywood with chromium plated screws with washer complete all as specified and directed. |
| 56 | Supply and fixing Vitreous China Urinal, Half stall type, white with PTMT waste fitting, PVC waste pipe, brass CP urinal spreader including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws complete all as specified and directed. |
| 57 | S & F in repair, Wash basins, vitreous china white of oval shape counter top, excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed. |
| 58 | S & F in repair,15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 59 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with providing 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 60 | S&F of framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or E 165 complete all as speciifed and directed. |
| 61 | M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over and including 25mm thick grid/sand cushion complete all as specified and directed. |
| 62 | S & F for precast cement concrete type B-1 (1:2:4) (20mm graded crushed stone aggregate ) as in kerb and edging to road and footh path, etc including chamfered, weathering, throating etc and setting in CM (1:4) complete all as specified and directed. |
| 63 | M&L plain cement concrete 1:3:6, type D2 (using 40mm graded crushed stone aggregate) 75mm thick as in sub base of floor complete all as specified and directed . |
| 64 | Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custody for taking credit all complete all as specified and directed. Please Enable Macros to View BoQ information |
| 65 | Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custody for taking credit all complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender