Tender For Annual Plan- Annual Plan 2025-26 periodical renewal No:192/26Basic Infrastructure For Sabarimala Edathavalam At Enathu Kadavu In Kulakkada Gp Under Vettikkavala Block -Annual Plan 2025-26 periodical renewal No:192/26Basic Infrastructure Fo
Tender Overview
Project Description
Tender for Annual Plan- Annual Plan 2025-26 periodical renewal No:192/26Basic Infrastructure For Sabarimala Edathavalam At Enathu Kadavu In Kulakkada Gp Under Vettikkavala Block -Annual Plan 2025-26 periodical renewal No:192/26Basic Infrastructure For Sabarimala Edathavalam At Enathu Kadavu In Kulakkada Gp Under Vettikkavala Block-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Enathu kadavu |
| 2 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 3 | OD518449/2025-2026:Bailing out water using 5HP engine and pump set including conveyance to site and erection , cost of fuel, lubrication oil and other stores, pay of staff etc complete |
| 4 | OD517617/2025-2026:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with goodquality blasted rubble including packing to compactness to lines and levels cost and conveyanceof all materials labour charges etc. complete as per direction of Departmental officers at site |
| 5 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns |
| 7 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 8 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 9 | OD518183/2025-2026:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cmin depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and liftup to 1.5 m as per direction of site Engineer-in-charge.(modified 50.2.26.1) |
| 10 | OD518298/2025-2026:Supplying and fixing name board of size 75x60cm installed in appropriate place visible to the public made of brick wall |
| 11 | 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender