Tender For Provision Of Secondary Roof Over Bldg No: P-5 In The Aor Of Age B/R-1 (W) Jrc Under Ge (West) Jrc.
Tender Value
42.90 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
3 days left
EMD
85800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Secondary Roof Over Bldg No: P-5 In The Aor Of Age B/R-1 (W) Jrc Under Ge (West) Jrc.
BOQ
| Sl. No. | Item Description |
| 1 | Structural design & analysis of secondary roof system over existing roof with steel shingles, including vetting from NIT/IIT or Govt approved institute |
| 2 | Preparation and submission of detailed drawings including plan, elevation, sections and walkthrough model to GE for approval before commencement of work. |
| 3 | Supply & installation of steel roofing shingles (galvalume base, stone coated, single pattern) over RCC slab with proper slope, overlaps, and concealed fasteners |
| 4 | S&F PVC 10 mm thick designer jalli (Jafri) fabricated by precision cut using CNC router machine in geometric pattern as approved by user including fixing to Mild steel frame work as directed. |
| 5 | M&L for Exterior grade coloured designer wall tiles 450 x 150 x 7-8 mm thick (rectangular) textured stone finish as on walls etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 10mm thick cement mortar (1:4) complete all as specified and as directed and as per sample approved. |
| 6 | M & L for PCC (1:2:4) type B-0 (using 12.50 mm graded crushed stone aggregates ) lean concrete as in foundation, filling and mass concrete of post complete all as specified. |
| 7 | S&F rolled sections as in main and cross beams,hip and jack rafters,purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. confirming to grade Fe-410-W complete all as specified and directed. |
| 8 | M&L, for cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in coping of parapets and or roof kerbs on roof chamfered on edge incl troweling slightly complete all as specified and directed. |
| 9 | M&L for Preparing and applying one coat of red oxide primer and two coats of synthetic enamel paint over new steel Surfaces of any description, over 10cm in width or girth |
| 10 | M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 11 | M&L for Cutting holes in brick walls in cement mortar exc half brick but not exc one brick wall for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required |
| 12 | Taking down cement plaster of any description any thickness /dado/Skirting/ including raking out joints hacking for key scrubbing down with water all as specified. |
| 13 | Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excludding precast concrete articles all as specified. |
| 14 | M&L for brick work with sub class 'B' old size bricks straight or curved on plan to any radius with old size brick thick walls built in cement mortar 1:6 all as specified. |
| 15 | M&L for 15 mm thick cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement all as specified |
| 16 | M&L for preparing new plastered or unplastered wall surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)all as specified and directed by Engr-in-charge. |
| 17 | M&L for complete removal of existing treatments on wall surfaces and applied two coat of weather coat over one coat of primer all as specified and directed by Engr-in-charge. |
| 18 | Material and labour for Granite (of any type) work 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 10mm thick in cement mortar (1:3) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 19 | Dismantling of water tanks (PVC/RCC of any description) exc 500 ltr and n.exc 1000 ltr capacity and removing from site complete all as specified and as directed |
| 20 | S&F 2000 ltr capacity rotational moulded polythene tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed |
| 21 | Taking up or down 15 mm bore steel tubing and connection including cleaning serviceable steel tubing and fittings for refixing and removing unserviceable from site including cutting chases in wall/floor and making good the surfaces complete all as specified. |
| 22 | Taking up or down 20 mm bore steel tubing and connection including cleaning serviceable steel tubing and fittings for refixing and removing unserviceable from site including cutting chases in wall/floor and making good the surfaces complete all as specified. |
| 23 | S&F 15mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified. |
| 24 | S&F 20mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified. |
| 25 | S&F 25 mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified. |
| 26 | S&F 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed |
| 27 | S & F in repair 20 mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 28 | M&L brickwork with subclass `B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 |
| 29 | S&F in position with clamps HDPE Pipes PN 10 |
| 30 | Excavating in soft/loose soil in trenches not exceeding 1.5 metre wide and n.exceeding 1.5 metre deep for pipe line drains and getting out, complete all as specified and directed. |
| 31 | -ditto- but depth exc 1.5m but not exc 3.00m |
| 32 | -ditto- but depth exc 3.00m but not exc 4.50m |
| 33 | Returing filling in including spreading, leveling watering and well ramming in lyers n exc 25cm, complete all as specified and directed. |
| 34 | Removing excavated soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and directed. |
| 35 | M & L TMT bars 10mm dia and over cut to length bent to shape required incl cranking, bending, spirally for columns hooking ends binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed. |
| 36 | M&L mild steel TMT bars 6mm to 8mm dia cut to length , bent to shape required, including cranking, bending spirally for stirrups and binding with and incl mild steel wire (annealed) not less than 0.9mm dia. Complete all as spcified and as directed. |
| 37 | M & L for formworks to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 38 | Use & waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floors and roofs exc. 10 cm but n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar works for rough finished surfaces of concretecomplete all as specified. |
| 39 | M&L reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all asspecified. |
| 40 | M&L PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as directed. |
| 41 | M&L pre-cast cement concrete M-25 design mix using 20mm graded stone aggregates as in manholes covers set in cement mortar (1:6) including necessary form work complete all asspecified. |
| 42 | M&L for trial bore in normal available strata (size 200mm and above) upto 50mtr depth complete all as specified |
| 43 | M&L for trial bore in normal available strata (size 200mm and above) exc 50 mtr but not exc 75mtr depth complete all as specified |
| 44 | S&F PVC (SWR) pipe 160mm dia 1st quality single socketed in any length with rubber ring joint incl all necessary fitting laid in trenches or in floors complete all as specified |
| 45 | M&L for filling coarse sand in trenches laid in layers, complete all as specified and directed. |
| 46 | M&L for gravel packing incl jute as filter media 4mm to 6mm size around the PVC pipe complete all as specified and directed. |
| 47 | M&L for filling of gravel in trenches of size 6mm to 10mm, complete all as specified and directed. |
| 48 | M&L for filling of gravel in trenches of size 2mm to 4mm, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender