Tender For Comprehensive Maintenance Work For Utcs Vishwas Nagar, Weight And Measure Building Vishwas Nagar, Employment Exchange Vishwas Nagar, Voter Center Vishwas Nagar, Dsssb Karkardooma, Diet Building Karkardooma Delhi During 2026-27. (Sh: Supply

Sharing tender

Tender for Comprehensive Maintenance Work For Utcs Vishwas Nagar, Weight And Measure Building Vishwas Nagar, Employment Exchange Vishwas Nagar, Voter Center Vishwas Nagar, Dsssb Karkardooma, Diet Building Karkardooma Delhi During 2026-27. (Sh: Supply Of Material And Miscellaneous Civil Maintenance Work). , Excavating Trenches By Mechinical / Manual Means Of Required Width For Pipes, Cables, Etc Including Excavation For Sockets, And Dressing Of Sides, Ramming Of Bottoms, For All Depth, Including Getting Out The Excavated Soil, And Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering, Etc. And Disposing Of Surplus Excavated Soil As Directed, To Dumping Ground Notified By Mcd Delhi Within Any Lead: , All Kinds Of Soil : Pipes, Cables Etc. Exceeding 80 Mm Dia. But Not Exceeding 300 Mm Dia , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level: , 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Ill) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , 1:5:10 (1 Cement : 5 Coarse Sand (Zone-Ill) Derived From Natural Sources : 10 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Providing And Fixing 18Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing Of Edges To Give High Gloss Finish Etc. Complete At All Levels. , Granite Stone Slab Of All Colour And Texture Except Black, Cherry/Ruby Red : Area Of Slab Upto 0.50 Sqm , Mirror Polishing On Marble Work/Granite Work/Stone Work Where Ever Required To Give High Gloss Finish Complete. , Stone Tile (Polished) Work For Wall Lining Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Cement Slurry @ 3.3 Kg/Sqm Including Pointing In White Cement Complete. , 8 Mm Thick : Granite Of Any Colour And Shade , Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3(1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). , Second Class Teak Wood , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: , 30 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing And Fixing Nickel Plated M.S. Pipe Curtain Rods With Nickel Plated Brackets : , 25 Mm Dia (Heavy Type) , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. , In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Providing & Fixing Glass Panes With Putty And Glazing Clips In Steel Doors, Windows, Clerestory Windows, All Complete With: , 4.0 Mm Thick Glass Panes , Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). , Medium Shade Pigment Using 50% White Cement 50% Grey Cement , Providing And Laying Rectified Glazed Ceramic Floor Tiles Of Size 300X300 Mm Or More (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In All Colours, Shades, Except White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Pointing The Joints With White Cement And Matching Pigments Etc., Complete. , Providing And Laying Vitrified Tiles In Floor In Diferent Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) Jointing With Grey Cement Slurry @3.3 Kg/Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier, Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily. , Double Charge Vitrified Tile Polished Finish Of Size : Size Of Tile 600 X 600 Mm , Providing And Laying Polished Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing , Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. , Polished Granite Stone Slab Of All Colour And Texture Except Black, Cherry/Ruby Red , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I) Single Socketed Pipes. , 110 Mm Diameter , Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/ Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is :5382, Leaving 10 Mm Gap For Thermal Expansion. , Single Tee With Door : 110X110x110 Mm , Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/ Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is :5382, Leaving 10 Mm Gap For Thermal Expansion. , Bend 87.5° : 110 Mm Bend , Providing And Fixing Unplasticised -Pvc Pipe Clips Of Approved Design To Unplasticised - Pvc Rain Water Pipes By Means Of 50X50x50 Mm Hard Wood Plugs, Screwed With M.S. Screws Of Required Length, Including Cutting Brick Work And Fixing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) And Making Good The Wall Etc. Complete. , 110 Mm , Providing And Fixing False Ceiling At All Heights Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms/Sqm (Both Side Inclusive) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50 Mm Long With 6 Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25 Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C/C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Difusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With : , 12.5 Mm Thick Tapered Edge Gypsum Plain Board Conforming To Is: 2095- (Part I) :2011 (Board With Bis Certification Marks) , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing 15 Mm Thick Densified Tegular Edged Eco Friendly Light Weight Calcium Silicate False Ceiling Tiles Of Approved Texture Of Size 595 X 595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanised Steel Sections (Galvanising @ 120 Grams Per Sqm Including Both Side) Consisting Of Main T Runner Suitably Spaced At Joints To Get Required Length And Of Size 24X38 Mm Made From 0.33 Mm Thick (Minimum) Sheet, Spaced 1200 Mm Centre To Centre, And Cross T Of Size 24X28 Mm Made Out Of 0.33 Mm (Minimum) Sheet, 1200 Mm Long Spaced Between Maintenance At 600 Mm Centre To Centre To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24 X28 Mm Made Of 0.33 Mm Thick (Minimum) Sheet To Be Inter Locked At Middle Of The 1200X 600 Mm Panel To From Grid Of Size 600X600 Mm, Resting On Periphery Walls /Partitions On A Perimeter Wall Angle Pre-Coated Steel Of Size(24X24x3000 Mm Made Of 0.40 Mm Thick (Minimum) Sheet With The Help Of Rawl Plugs At 450 Mm Centre To Centre With 25 Mm Long Dry Wall Screws @ 230 Mm Interval And Laying 15 Mm Thick Densified Edges Calicum Silicate Ceiling Tiles Of Approved Texture In The Grid, Including, Cutting/ Making Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc., Wherever Required. Main T Runners To Be Suspended From Ceiling Using Al. Slotted Cleats Of Size 25X35x1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm G.I. Adjustable Rods With Galvanised Steel Level Clips Of Size 85 X 30 X 0.8 Mm, Spaced At 1200 Mm Centre To Centre Along Main T. Bottom Exposed With 24 Mm Of All T-Sections Shall Be Pre-Painted With Polyster Baked Paint, For All Heights, As Per Specifications, Drawings And As Directed By Engineer-In-Charge. Note :- Only Calcium Silicate False Ceiling Area Will Be Measured From Wall To Wall. No Deduction Shall Be Made For Exposed Frames/Opening (Cut Outs) Having Area Less Than 0.30 Sqm.The Calcium Silicate Ceiling Tile Shall Have Nrc Value Of 0.50 (Minimum), Light Reflection 85%, Non- Combustible As Per B.S. 476 Part Iv, 100% Humidity Resistance And Also Having Thermal Conductivity 0.043 W/Mk. , Providing And Fixing Gi Clip In Metal Ceiling System Of 600X600 Mm Module Which Includes Providing And Fixing C Wall Angle Of Size 20X30x20 Mm Made Of 0.5 Mm Thick Pre Painted Steel Along The Perimeter Of The Room With Help Of Nylon Sleeves And Wooden Screws At 300 Mm Center To Centre, Suspending The Main C Carrier Of Size 10X38x10 Mm Made Of G.I Steel 0.7 Mm Thick From The Sofit With The Help Of Sofit Cleat 37X27x25x1.6 Mm, Rawl Plugs Of Size 38X12 Mm And C Carrier Suspension Clip And Main Carrier Bracket At 1000 Mm C/C. Inverted Triangle Shaped Spring Tee Having Height Of 24 Mm And Width Of 34 Mm Made Of Gi Steel 0.45 Mm Thick Is Then Fixed To The Main C Carrier And In Direction Perpendicular To It At 600 Mm Centers With The Help Of Suspension Brackets. Wherever The Main C Carrier And Spring T Have To Join, C Carrier And Spring T Connectors Have To Be Used. All Sections To Be Galvanized @ 120 Gms/Sqm (Both Side Inclusive), Fixing With Clip In Tiles Into Spring T With : , Gi Metal Ceiling Clip In Plain Beveled Edge Global White Color Tiles Of Size 600X600 And 0.5 Mm Thick With 25 Mm Height, Made Of G I Sheet Having Galvanizing Of 100 Gms/ Sqm (Both Sides Inclusive) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns (Minimum), Including Factory Painted Afer Bending. , 12 Mm Cement Plaster Of Mix: , 1:6 (1 Cement: 6 Coarse Sand) , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade: , New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm) , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade: , Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Wall Painting With Acrylic Emulsion Paint, Having Voc (Volatile Organic Compound ) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour. , One Coat , Two Coats , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade: , One Or More Coats On Old Work , French Spirit Polishing : , One Or More Coats On Old Work , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade: , Old Work (One Or More Coat Applied @0.90 Itr/10 Sqm). , Providing And Fixing Double Scaffolding System (Cup Lock Type) On The Exterior Side, Up To Seven Story Height Made With 40 Mm Dia M.S. Tube 1.5 M Centre To Centre, Horizontal & Vertical Tubes Joining With Cup & Lock System With M.S. Tubes, M.S. Tube Challies, M.S. Clamps And M.S. Staircase System In The Scaffolding For Working Platform Etc. And Maintaining It In A Serviceable Condition For The Required Duration As Approved And Removing It There After. The Scaffolding System Shall Be Stiffened With Bracings, Runners, Connection With The Building Etc Wherever Required For Inspection Of Work At Required Locations With Essential Safety Features For The Workmen Etc. Complete As Per Directions And Approval Of Engineer-In-Charge. The Elevational Area Of The Scaffolding Shall Be Measured For Payment Purpose. The Payment Will Be Made Once Irrespective Of Duration Of Scaffolding. Note: - This Item To Be Used For Maintenance Work Judicially, Necessary Deduction For Scaffolding In The Existing Item To Be Done. , Cleaning Of Terrace/Loft Water Storage Tank (Inside Surface Area) Upto 2000 Litre Capacity At All Heights With Coconut Brushes, Duster Etc., Removal Of Silt, Rubbish From The Tank And Cleaning The Tank With Fresh Water Disinfecting With Bleaching Powder @ 0.5Gm Per Litre Capacity Of Tank Including Marking The Date Of Cleaning On The Side Of Tank Body With The Help Of Stencil And Paint And Disposing Of Malba To Dumping Ground Notified By Mcd Delhi Within Any Lead All Complete As Per Direction Of Engineer- In-Charge. (The Old Date Already Written On Tank Should Be Removed With Paint Remover Or Black Paint And If Date Is Not Written With The Stencil Or Old Date Is Not Removed Deduction Will Be Made @ Rs. 0.10 Per Litre) (If During Cleaning Any Gi Fittings Or Ball Cock Is Damaged That Is To Be Repaired By Contractor At His Own Cost And Nothing Extra Will Be Paid On This Account) , Cleaning And Desilting Of Gully Trap Chamber, Including Removal Of Rubbish Mixed With Earth Etc. And Disposal Of Same To Dumping Ground Notified By Mcd Delhi Within Any Lead, All As Per The Direction Of Engineer-In-Charge. , Cleaning Of Chocked Sewer Line By Diesel Running Vehicle Mounting Hydraulic Operated High Pressure Suction Cum Jetting Sewer Cleaning Machine Fitted With Pump Having 4000 Litres Suction Capacity And 6000 Litres Water Jetting Tank Capacity Including Skilled Operator, Supervising Engineer Etc. For Cleaning And Partial Desilting Of Manholes And Dechocking Of Sewer Lines. Dechocking And Flushing Of Sewer Line From One Manhole To Another By High Pressure Jetting System Of 2200 Psi For Sewer Line From 150 Mm Dia Upto 300 Mm Dia For All Depth. , Cleaning Of Under Ground Sump, Over Head Reinforced Cement Concrete Tank (Independent Staging) Including Disposal Of Slit And Rubbish To Dumping Ground Notified By Mcd Delhi Within Any Lead, All As Per Direction Of Engineer-In-Charge. The Cleaning Shall Consist Following Operations:- (I)Tank Shall Be Emptied Of Water By Pumping & Bottom Shall Be Cleaned Of Silt And Other Deposits. (Ii) Entire Surface Area Of The Sump Shall Then Scrubbed Thoroughly With Wire Brush Etc. And Pressure Washed With Water. (Iii) Chlorination Of Reinforced Cement Concrete Internal Surface By Liquid Chlorine. (Iv) The Treated Surface Shall Be Dried Using Air Jetting And All Loose Particles Shall Be Removal From The Surface. (V) Finally The Surface Shall Be Treated With Ultraviolet Radiation Etc. As Per Direction Of Engineer-In-Charge. , Disconnecting Damaged Overhead/Terrace Pvc Water Storage Tank Of Any Size From Water Supply Line And Removing From The Terrace Including Shifting At Ground Level As Per Direction Of Engineer-In-Charge. , Dismantling W.C. Pan Of All Sizes Including Disposal Of Dismantled Materials Including Malba To Dumping Ground Notified By Mcd Delhi Within Any Lead All Complete As Per Directions Of Engineer-In-Charge. , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Usable Material Within 50 Metres Lead And Disposal Of Malba To Dumping Ground Notified By Mcd Delhi Within Any Lead. , For Thickness Of Tiles 10 Mm To 25 Mm , Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material Within 50 Metres Lead And Disposal Of Unserviceable Material To Dumping Ground Notified By Mcd Delhi Within Any Lead. , Dismantling C.I. Or Asbestos Rain Water Pipe With Fittings And Clamps Including Stacking The Serviceable Material Within 50 Metres Lead And Disposal Of Malba To Dumping Ground Notified By Mcd Delhi Within Any Lead : , 100 Mm Dia Pipe , Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To Dumping Ground Notified By Mcd Delhi Within Any Lead. , Providing And Fixing Concertina Coil Fencing With Punched Tape Concertina Coil 600 Mm Dia 10 Metre Openable Length ( Total Length 90 M), Having 50 Nos Rounds Per 6 Metre Length, Upto 3 M Height Of Wall With Existing Angle Iron ‘Y Shaped Placed 2.4M Or 3.00 M Apart And With 9 Horizontal R.B.T. Reinforced Barbed Wire, Stud Tied With G.I. Staples And G.I. Clips To Retain Horizontal, Including Necessary Bolts Or G.I. Barbed Wire Tied To Angle Iron, All Complete As Per Direction Of Engineer-In-Charge, With Reinforced Barbed Tape(R.B.T.) / Spring Core (2.5 Mm Thick) Wire Of High Tensile Strength Of 165 Kg/ Sq. Mm With Tape (0.52 Mm Thick) And Weight 43.478 Gm/ Metre (Cost Of M.S. Angle, Cement Concrete Blocks Shall Be Paid Separately) , Providing And Laying At Or Near Ground Level Factory Made Kerb Stone Of M-25 Grade Cement Concrete In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Making Joints With Or Without Grooves (Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5 Mm), Including Making Drainage Opening Wherever Required Complete Etc. As Per Direction Of Engineer- In-Charge (Length Of Finished Kerb Edging Shall Be Measured To Calculate Volume For Payment). (Precast cement concrete Kerb Stone Shall Be Approved By Engineer-In-Charge). , Taking Out Existing cement concrete Interlocking Paver Blocks From Footpath/ Central Verge, Including Removal Of Rubbish Etc., Disposal Of Unserviceable Material To Dumping Ground Notified By Mcd Delhi Within Any Lead, And Stacking Of Serviceable Material Within 50 Metre Lead As Per Direction Of Engineer-In-Charge. , Laying Old Cement Cocrete Interlocking Paver Blocks Of Any Design/ Shape Laid In Required Line, Level, Curvature, Colour And Pattern Over And Including 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Fine Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge. (Old cement concrete Paver Blocks Shall Be Supplied By The Department Free Of Cost). , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan ) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: , White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests , Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required : , W.C. Pan With Isi Marked White Solid Plastic Seat And Lid , Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430X260x350 Mm And 340X410x265 Mm Sizes Respectively With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.I Clamps Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required : , Range Of Two Urinal Basins With 5 Litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing Floor Mounted, White Vitreous China Single Piece, Double Traps Syphonic Water Closet Of Approved Brand/Make, Shape, Size And Pattern Including Integrated White Vitreous China Cistern Of Capacity 10 Litre With Dual Flushing System, Including All Fittings And Fixtures With Seat Cover, Cistern Fittings, Nuts, Bolts And Gasket Etc Including Making Connection With The Existing P/S Trap, Complete In All Respect As Per Directions Of Engineer-In-Charge. , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply And All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. Internal Work - Exposed On Wall , 20 Mm Nominal Dia Pipes , 25 Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings And Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. , 20 Mm Nominal Dia Pipes , Constructing Brick Masonry Manhole In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) With Reinforced Cement Concrete Top Slab With 1:1.5:3 Mix (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size), Foundation Concrete 1:4:8 Mix (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mm Nominal Size), Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Finished With Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : , Inside Size 90X80 Cm And 45 Cm Deep Including C.I. Cover With Frame (Light Duty) 455X610 Mm Internal Dimensions, Total Weight Of Cover And Frame To Be Not Less Than 38 Kg (Weight Of Cover 23 Kg And Weight Of Frame 15 Kg) : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Supplying And Fixing C.I. Cover 300X300 Mm Without Frame For Gully Trap (Standard Pattern) The Weight Of Cover To Be Not Less Than 4.5 Kg , Dismantling Of Manhole Including Reinforced Cement Concrete Top Slab, C.I. Cover With Frame, Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 M Lead As Per Direction Of Engineer-In- Charge: , Rectangular Manhole 90X80 Cm And 45 Cm Deep , Raising Manhole Cover And Frame Slab To Required Level Including Dismantling Existing Slab And Making Good The Damage As Required (Raising Depth Of Manhole To Be Paid Separately): , Rectangular Manhole 90X80 Cm With Rectangular Cover 600 X 450 Mm Of Grade Ld - 2.5 , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Panelling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately): , For Fixed Portion : Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) : Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): , With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is : 6315, Having Brand Logo Embossed On The Body / Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors, Including Cost Of Cutting Floors, Embedding In Floors As Required And Making Good The Same Matching To The Existing Floor Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Engineer- In-Charge. , With Stainless Steel Cover Plate Minimum 1.25 Mm Thickness , Chipping Of Unsound/Weak Concrete Material From Slabs, Beams, Columns Etc. With Manual Chisel And/ Or By Standard Power Driven Percussion Type Or Of Approved Make Including Tapering Of All Edges, Making Square Shoulders Of Cavities Including Cleaning The Exposed Concrete Surface And Reinforcement With Wire Brushes Etc. And Disposal Of Debris For All Lead And Lifts All Complete As Per Direction Of Engineer-In-Charge , 50 Mm Average Thickness , 25 Mm Average Thickness , Providing, Mixing And Applying Bonding Coat Of Approved Adhesive On Chipped Portion Of Reinforced Cement Concrete As Per Specifications And Direction Of Engineer- In-Charge Complete In All Respect. , Sbr Polymer (@10% Of Cement Weight) Modified Cementitious Bond Coat @ 2.2 Kg Cement Per Sqm Of Surface Area Mixed With Specified Proportion Of Approved Polymer , Providing, Mixing And Applying Sbr Polymer (Of Approved Make) Modified Cement Mortar In Proportion Of 1:4 (1 Cement: 4 Graded Coarse Sand With Polymer Minimum 2% By Wt. Of Cement Used) As Per Specifications And Directions Of Engineer-In-Charge. Note: Measurement And Payment: The Pre-Measurement Of Thickness Shall Be Done Just After The Surface Preparation Is Completed And Payment Under This Item Shall Be Made Only After Proper Wet Curing Has Been Done And Surface Has Been Satisfactorily Evaluated By Sounding / Tapping With A Blunt Metal Instrument And/Or The 75 Mm Size Cube Crushing Strength At The End Of 28 Days To Be Not Less Than 30 N/Sqmm2). , 25 Mm Average Thickness In 2 Layers. , 50 Mm Average Thickness In 3 Layers. , Providing, Erecting, Maintaining And Removing Temporary Protective Screens Made Out Of Specified Fabric With All Necessary Fixing Arrangement To Ensure That It Remains In Position For The Work Duration As Required By The Engineer-In-Charge. , Wooven Pvc Cloth , Supplying & Stacking Of Following Materials At Site/Enquiry Office Of Approved Make: , Portland Cement (Opc-43 Grade) , Oxidised Mild Steel Sliding Door Bolt 300X16 Mm , Anodised Aluminium Sliding Door Bolt 300X16 Mm , Anodised Aluminium Sliding Door Bolt 250X16 Mm , Anodised Aluminium Tower Bolt (Barrel Type) 300X10 Mm , Anodised Aluminium Tower Bolt (Barrel Type) 250X10 Mm , Anodised Aluminium Tower Bolt (Barrel Type) 150X10 Mm , Anodised Aluminium Handles 125 Mm With Plate 175 X 32 Mm , 8 Mm Dia C.P. Brass/ S.S. Jet With Flexible Tube Upto 1 Metre Long With S.S. Tringular Plate For Eureopean Type W.C. , Mirror Of Superior Make Glass 60X45 Cm , Shower Rose C.P. Brass For 15 To 20 Mm Inlet 100 Mm Dia , C.P. Brass Waste 32 Mm , Double Charge Vitrified Tile Polished Finish Of Size 60 X 60 Cm , 600X120 Mm Glass Shelf With Anodised Aluminium Angle Frame, C.P. Brass Brackets And Guard Rail Of Standard Size , Aluminium Hanging Floor Door Stopper With Twin Rubber & Stopper , Hydraulic Door Closer Tubular Type Aluminium Section Body , Rectangular Shape 600X450 Mm Precast Reinforced Cement Concrete Manhole Cover With Frame - L.D. - 2.5 , Circular Shape 560 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame - H.D. - 20 , U-Pvc Pipes (Working Pressure 4 Kg / Cm²) Single Socketed Pipe 75 Mm Dia , U-Pvc Pipes (Working Pressure 4 Kg / Cm²) Single Socketed Pipe 110 Mm Dia , Upvc Coupler For Upvc Drainage Pipes 75 Mm , Upvc Coupler For Upvc Drainage Pipes 110 Mm , Upvc Single Equal Tee (Without Door) 75X75x75 Mm , Upvc Single Equal Tee (Without Door) 110X110x110 Mm , Upvc Bend 87.5° 75 Mm Bend , Upvc Bend 87.5° 110 Mm Bend , C.P. Brass Bibcock 15 Mm , C.P. Brass Long Nose Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , C.P. Brass Angle Valve 15 Mm , Flushing Cistern P.V.C. 10 Litre Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , Precast Reinforced Cement Concrete Grating With Frame 500X450 Mm Horizontal Grating , 15 Mm Ptmt Bib Cock , 15 Mm Ptmt Bib Cock Long Body With Flange , 15 Mm Dia Ptmt Stop Cock (Male Thread) , Ptmt Pillar Cock , Ptmt Grating 100 Mm Dia , Ptmt Angle Stop Cock With Flange 15 Mm , Ceramic Glazed Tiles 1St Quality Minimum Thickness 5Mm In All Colours Shades And Designs Except Burgundy, Bottle Green, Black , 15 Mm Nominal Bore And 45 Cm Length Pvc Connection Pipe With P.T.M.T. Nuts , Adhesive Solvent Cement , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Nominal Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Nominal Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Nominal Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Nominal Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 80 Mm Nominal Dia , Telescopic Drawer Channels 300 Mm Long , M Seal , Cp Brass Health Faucet With 1 Mtr. Tube & Hook , Telescopic Drawer Channels 450 Mm Long , Telescopic Drawer Channels 600 Mm Long , Ptmt Health Faucet With 1 Mtr. Tube & Hook , Cistern Syphon Set , Pvc Tank Cover (500-2000 Litre) , Pvc Elbow 50Mm , Cistern Handle With Lever For Flushing Cistern , S.S. Grating 100 Mm Dia , 15 Mm Nominal Bore And 60 Cm Length Pvc Connection Pipe With P.T.M.T. Nuts , 15 Mm Nominal Bore And 90 Cm Length Pvc Connection Pipe With P.T.M.T. Nuts , Cpvc (Brass Inserted) Female Threaded Elbow 20 Mm , Cpvc Elbow 20 Mm , Cpvc Elbow 25 Mm , Cpvc Elbow 32 Mm , Cpvc Elbow 40 Mm , Cpvc Elbow 50 Mm , Cpvc Elbow 80 Mm , Cpvc Tee 20 Mm , Cpvc Tee 25 Mm , Cpvc Tee 32 Mm , Cpvc Tee 40 Mm , Cpvc Tee 50 Mm , Cpvc Tee 65 Mm , Cpvc Tee 80 Mm , Cpvc Tee 65 X 20 Mm , Cpvc (Brass Inserted) Male Threaded Tee 20Mm , Cpvc Union 20 Mm , Cpvc Union 25 Mm , Cpvc Union 32 Mm , Cpvc Union 40 Mm , Cpvc Union 50 Mm , Cpvc Union 65 Mm , Cpvc Ball Valve 20 Mm , Cpvc Ball Valve 25Mm , Cpvc Ball Valve 32Mm , Cpvc Ball Valve 40Mm , Cpvc Ball Valve 50Mm , Cpvc Ball Valve 80Mm , Cpvc (Brass Inserted) Mta 20Mm , Cpvc (Brass Inserted) Fta 20Mm , Cpvc Socket 20 Mm , Cpvc Socket 25 Mm , Cpvc Socket 32 Mm , Cpvc Socket 40 Mm , Cpvc Socket 50 Mm , Cpvc Socket 80 Mm , Cpvc (Brass Inserted) Fta 25X20mm , Cpvc Tank Nipple 25 Mm , Cpvc Solvent , Cpvc Plug 15Mm , Check Valve 20Mm , Check Valve 15Mm , Teflon Tape , Pipe Metal Clamp 20 Mm , C.P. Elbow Single Lever Wall Mixer With Swinging Spout Of Make Jaquar (Cat No. Flr-Chr-5166) Or Equivalent Make , Soot Gola , Dr. Fixit (Water Proof) 101 Lw + , Ptmt Two Way Bib Cock , Ptmt Two Way Stop Cock , One Piece Ewc Seat Cover , Carrying Out Of Welding Work By Engaging One Welder With Welding Machine And Necessary Equipment For Welding (Welding Machine, Welding Rod, Cutting Wheels And Required Material If Required) Including Necessary Finishing All Complete As Per Direction Of Engineer-In-Charge. , Providing And Fixing Polycarbonate Sheets 2.85 Mm Thick Uv Coating Non Breakable In Window Shutters With Ms Beading Of Size 12X3 Mm Fixed With Welding Or Nut Bolt Where Ever Required At All Floor Levels All Complete As Per Direction Of Engineer - In - Charge. (Cost For Beading Shall Be Paid Separately). , Floor Painting With Waterbased Acrylic Emulsion Paint Exclusively Designed For Floor Guard Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : Two Or More Coats