Tender For Construction Of Acr-4, Toilet, Septic Tank, Boundary Wall And Deep Boring In The Upgraded High School, Karodih Under Jamua Block
Tender Value
95.05 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
5 days left
EMD
1.90 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Giridih → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Acr-4, Toilet, Septic Tank, Boundary Wall And Deep Boring In The Upgraded High School, Karodih Under Jamua Block
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 2 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 3 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 4 | Providing designation 75 B Brick flat soling joints with local sand including cost of water- ing taxes and royalty all complete as per building specification and direection of E/I |
| 5 | Providing P.C.C (M-150) (1:2:4) in foundation with approved quality of stone Chips of clean coarse sand of F.M. 2.5 to 3.00 inculuding screening ,shuttering, mixing cement concrete in mixer and placing in position vibrating, striking, curing ,taxes and royalty all complete as per building specification and direction of E/I |
| 6 | Providing R.C.C. (M-200) (1:1.5:3) in Column with approved quality of stone Chips (20mm.to 6mm.Size) graded and clean coarse sand of F.M. 2.5 to 3.00 inculuding screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, striking, curing,(but excluding the cost of reinforcement) taxes and royalty all complete as per buildingspecification and direction of E/I(Grade-A) |
| 7 | Providing R.C.C. (M-200) (1:1.5:3) in Column with approved quality of stone Chips (20mm.to 6mm. Size) graded and clean coarse sand of F.M. 2.5 to 3.00 inculuding screening,shuttering ,mixing cement concrete in mixer and placing in posit-ion vibrating, striking, curing,(but excluding the cost of reinforcement) taxes and royalty all complete as per buildingspecification and direction of E/I |
| 8 | Providing R.C.C. (M-200) (1:1.5:3) in Column with approved quality of stone Chips (20mm.to 6mm.Size) graded and clean coarse sand of F.M. 2.5 to 3.00 inculuding screening, shuttering,mixing cement concrete in mixer and placing in position vibrating, striking, curing,(but excluding the cost of reinforcement) taxes and royalty all complete as per buildingspecification and direction of E/I(Grade-A) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 10 | Providing R.C.C. (M-200) (1:1.5:3) in Tie beams of & all types Beam, with approved quality of stone Chips (20mm.to 6mm.Size) graded andclean coarse sand of F.M. 2.5 to 3.00 inculuding screening,shuttering,mixing cement concrete in mixer and placing in position vibrating, striking,curing,(but excluding the cost of reinforcement) taxes and royalty all comp.as per building specification and directionof E/I. |
| 11 | Providing R.C.C. (M-200) (1:1.5:3) in Tie beams of & all types Beam, with approved quality of stone Chips (20mm.to 6mm.Size) graded andclean coarse sand of F.M. 2.5 to 3.00 inculuding screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, striking,curing,(but excluding the cost of reinforcement) taxes and royalty all comp.as per building specification and directionof E/I. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, Tie beams etc. for mass concrete |
| 13 | Providing designation 75 B Brick work in C.M.(1:6) in foundation and plinth with appro-ved quality of clean coarse sand of F.M. 2.00 to 2.5 including 10 mm thick mortar joints, cost of screening, scaffplding, raking out joints to 15 mm. depth, curing, taxes and royalty all complete as per building specification and direection of E/I(Grade-A) |
| 14 | Providing 250mm thick brick jali work in C.M. (1:8) in superstructure with designation 75A brick and approved quality of clean coarse sand of F.M. 2 to 2.5, finished with deep ruled pointing in C.M. (1:3) with sand of F.M. 1.5 on entire surface including the cost of finished the holes, screening carriage of materials, scaffolding, raking out joints to 15 mm depth, curing taxes and royalty all complete, as per approveddesign, building specification and direction of E/I. |
| 15 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). |
| 16 | Providing designation 75B Brick work in C.M.(1:6) in Super Structure with approved quality of clean coarse sand of F.M.2.00 to 2.5 including 10 mm thick mortar joints,cost of screening,scaffplding, raking out joints to 15 mm. depth, curing, taxes and royalty all compl-ete as per building specification and direection of E/I(Grade-A) |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 18 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 19 | Providing R.C.C. (M-150) (1:2:4) in Lintel & band with approved quality of stone Chips (20 mm. to 6mm.Size) graded and clean coarse sand of F.M. 2.5 to 3.00 inculuding screening, shuttering,mixing cement concrete in mixer and placing in position vibrating, striking,curing,(but excluding the cost of rein forcement) taxes and royalty all complete as per building specification and direction of E/I. |
| 20 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 21 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 22 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 23 | Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases |
| 24 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 26 | Providing and fixing fan hook of 16mm dia. M.S.bar and 1m long,bend to required size and shape, placed in position and fixed in R.C.C. Beam/Slab at the time of casting all complete as per specification and direction of E/I |
| 27 | Providing 19mm water proof cement Plaster in cm (1:3) in top of roof with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I |
| 28 | Providing 6mm cement Plaster in cm (1:4) in Ceiling with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I |
| 29 | Providing 12mm cement plaster in cm (1:6) in both side wall with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specifica- tion and direction of E/I |
| 30 | Providing and laying hydraulically machine pressed terrazo tiles 20mm thick of approved texture with down marble chips of approved shade, size and quality, laid on 19mm. Thick bed of lime mortar (1:1:1:) (lime: surkhi :sand) with neat cement slurry mixed with pigment to match the shade of tiles between joints, including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing , royalty and taxes all complete as per building specification and direction of E/I.(a) Grey colour with 100% ordinary cement |
| 31 | For StairProviding and laying vitrified floor tiles for step of stair in with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete step tiles & have bullnose, Anti and self embossed line. Size of Tile 1200x300 mmx15 mm |
| 32 | Providing 12mm thick cement paster in cm (1:4) with clean coarse sand &1.5mm cement punning including curing, carriage of waterwith all leads and lifts as per building specification and direction of E/I |
| 33 | Supplying fitting and fixing 20 gauge G.C.I. Sheet (Door & Window)gate on M.S.angle frame of size 60*60*6mm, including cost of fabrication providing necessary locking arrangements worth haskel and domny duly fixed in C.C. (1:2:4) blocks of required size, applying a prim ing red lead paint over steel work,taxes all com.as per specification and direction E/I. |
| 34 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. |
| 35 | Supplying fitting and fixing M.S. grill of 20*6 mm M.S.flats as per approved deesign and drowing ,properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction E/I. |
| 36 | Provding two coats of Snowcem of approbved shade and make over a coat of cement primer on new surface including preparing the plasterd surface smooth with sand paper, scffolding, curing and taxes all complete as per building specification and direction of E/I. |
| 37 | Provding two coats of synthetic enamel paint over a primer coat of red lead paint of approved shade and make over new steels surface including preparing the new steel surface after cleaning, removing dircet scales, smokes, grese and cleaning the surface taxes and royalty all complete as per building specification and direction of E/I(Mode of mea surement-Area shall be multiplied by the co-efficient as indicated in building specifications) |
| 38 | Provding two coats of synthetic enamel paint over a primer coat of red lead paint of approved shade and make over new wooden surface……………….. as indicated in building specifications) |
| 39 | providing two coats of dry distemper of approved shade and make over a primer coat of washing over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper ,applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction E/I. |
| 40 | Supplying fitting and fixing 20 gauge G.C.I. Sheet (Door & Window)gate on M.S.angle frame of size 60*60*6mm, including cost of fabrication providing necessary locking arrangements worth haskel and domny duly fixed in C.C. (1:2:4) blocks of required size, applying a prim ing red lead paint over steel work,taxes all com.as per specification and direction E/I. |
| 41 | Providing and laying hydraulically machine pressed precast terrazo tiles 20mm thick in skirting of approved texture with 4mm down marble chips of approved shade, size and quality, over 12mm. Thick cement plaster (1:3) base with neat cement slurry mixed with pigment to match the shade of tiles between joints, rubbed and polishing to granolithic finish with approved quality of carborandum stone including cost of curing , royalty and taxes all complete as per building specification and direction of E/I. Other colour excluding grey with 100% ordinary cement |
| 42 | Supplying fitting and fixing C.A.R.W.D. Pipe 150 mm dia with necessary strips,spikes,bands,shoesetc including cost of carriage all complete as per building specification and direction E/I. |
| 43 | providing Tor steel reinforcement of 8 mm to 20mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. 08mm -10 mm dia. |
| 44 | 12mm -16 mm dia. |
| 45 | Supplying fitting and fixing M.S,grill gate with M.S.grill made of 20 x 6 mm flates or 16 mm M.S. sqare bars fitted on 25 x 25 x 6 mm M.S. angle frame of size 60*60*6mm, including cost of fabrication providing necessary locking arrangements worth haskel and domny duly fixed in C.C. (1:2:4) blocks of required size, applying a prim ing red lead paint over steel work,taxes all com.as per specification and direction E/I. |
| 46 | Providing two coats of synthetic enamel paint of approved shade and made over steel surface including cleaning the surface thoroughly including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I |
| 47 | Less B/B |
| 48 | Add Carriage Cost MaterialsBricks |
| 49 | Stone Chips |
| 50 | Cement & Steel |
| 51 | Supplying all material labours and tools and equipment for driling 200x150 mm dia bore in any kinds of soil and rock by using DTH super rig machine and ball hammer technology inclusive of mobilization demobi dbilization of rigs air compressor all accessories air compressor all accessories tools and plant labour etc. all complete job including transportation charge.0.00m to 50.00m below G.L |
| 52 | 50.00 m to 134 m below G.L |
| 53 | Supplying assembling lowering and fixing in vertical portion in Borewell Unplasticized PVC medium well casing (CM) pipe of required dia do…………..do………. All completed job.150mm nom |
| 54 | cleaning flushing and developing of drilled hole for testing the discharge of water development of bore well by continous flow of water by using heavy compressor upto satisfaction of E/I. to get uninterrupted flow of water free from sand and soil etc.2HRs operation |
| 55 | Supplying and fitting M.S or G.I cap having a hole to pass 32 mm dia Gi/PVC pipe over 200mm dia casing pipe as per direction of E/I for safety of drilled bore including provision of guard for safety of the same till returned final |
| 56 | Supplying materials and labours for constructing bore well chamber of 75B designation brick masonry chamber 600mmx450mm and 750mm deep internal dimension having 250mm thickness in cement mortar 1:6 including 12mm cement plaster 1:6 with 600mmx475mm RCC cover with earth work in excavation and 75mm thick PCC(1:3:6) in foundation and refilling all complete as per specification and direction of E/I (Annexure I Attached) (As per Old Model Estimate) |
| 57 | Supplying 100 mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and poly-propylene/ noryl impeller. Motor suitable for working on 415V+10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to with stand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump. (Make KSB/Crompton) (DW&S ) (Sl 139-M1055)2 HP (1No.Working) |
| 58 | Supplying fitting and fixing starter with panel board do……….do……… all complete job |
| 59 | supplying all labour tools and equipment for fixing 3 core 4sqmm copper cable as per specification and direction of E/I. (for connection from main line to pump or panel board or proposed HYDT) |
| 60 | Supplying Fitting and fixing 32mm dia CPVC Pipe, Column Pipe and Outlet Pipe Do………..do……….. All complete jobExposed on Wall |
| 61 | Polythene water storage tank of ISI Mark (e.g. Sintex/Sinter/Himgir/Gangotri etc.) with cover and locking system (Stand with 2000 Lts. tank ) |
| 62 | Wiring for light/fan point/ exhaust fan point/ call bell point with 1.5sq. Mm FRPVC insulate copper conductor single core cable in surface / recessed conduit with paiono type switch phenolic laminated sheet suitable size M.S. box and eathing the point with 1.5 sq.mm FRPVC insulated copper conductor single core cable etc. as required Group-A |
| 63 | S/F following pianotype switch/socket on the existing switch box/cover including connection etc. as required |
| 64 | S/F PVC/GI boxes Supplying and fixing of the following sizes of PVC/GI box on surface recess with suitable size of phenolic laminated sheet cover in front incluiding painting etc. as required(b) 4\\"X7\\" |
| 65 | 3mm thick phelonic laminated sheet |
| 66 | Wiring for circuit submain wiring along with the earth wire with the following sizes of PVC insulated copper conductor single core cable in surface of recessed PVC conduit as required.2X2.5 sq.mm. + 1X2.5sq.mm. earth wire |
| 67 | 2X1.50 sq. mm + 1X1.50sq.mm earth wire |
| 68 | 2X6.00 sq. mm + 2X6.00sq.mm earth wire |
| 69 | S/F brass vatton/ Angle holder incuiding connection etc. as required |
| 70 | 20/22 watt LED tubelight |
| 71 | 15/16 watt LED bulb |
| 72 | Electronic step fan regulator |
| 73 | S/F 3 pin 5amp celling rose on the existing junction box wodden block including connection etc. as required |
| 74 | S/F the following way single pole and neutral sheet steel M.C.B. D.B. consumer unit 240V on surface by recess complete with tinnned copper busbar , neutral busbar earth plate dinbar hinged front acrylic cover from MCB knob detachable gland plate inter connection phosphatied and powder painted incluiding earthing etc. as reqired (Without MCB/RCCB/isolator) |
| 75 | Supply of 48\\" (1200mm) AC celling fan |
| 76 | I.T.C of celling fan incluiding wiring the down rods of standard length (upto 30cm) with 1.5 sq. mm. FRPVC insulated copper conductor single core cable etc. as required |
| 77 | Earthing with copper earth plate 600X600X3 mm thick (charcoal or coke and slat) |
| 78 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge20 mm nominal dia Pipes |
| 79 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge25 mm nominal dia Pipes |
| 80 | Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 90 mm long, weighing not lessthan 93 gms |
| 81 | Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 82 | 3 core PVC insulated, PVC sheathed copper conductior flat submersible cable, supplying, flat flexible submersible cable with copper conductor PVC insulated and PVC sheathed 3 core 4sq mm |
| 83 | Supplying and fittinbg submersible pump 150mm dia with bronze impeller up to 8 stage PM 1-2-1 capacity 1HP |
| 84 | Goods & Service Tax (G.S.T.) - |
| 85 | Labour Cess - Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender