Supply Of Furniture

Sharing tender

Supply Of furniture , computer table - overall size 500 mm d x 900 mm w x 750 h. raw material (specs of lamin ations & thickness): mdf, pb 15mm mdf for table top, 15mm pb for other panels. 0.18mm pvc was vacuum laminating for surface of table top, 0.4 mm lipping for other panels. make godrej or similar. [ warranty pe riod: 30 months after the date of delivery ] ] , mid back chair : 1) seat assembly : the seat assembly is made up of 1.2 (+/-) 0.1cm. thick h ot-pressed plywood measured as per qa method described in ocp-qlta-p14-18, upholstered with fabric up holstery covers and moulded polyurethane foam. *seat size : 47.0 cm. (w) x 48.0 cm. (d). *mid back size : 46.5 cm. (w) x 60.5cm. (h). 2) back assembly : the back asembly is made of powder coated (dft 40 - 60 microns) tubular frame of 2.54 (+/-) 0.03 cm. x 0.2 (+/-) 0.016cm.thk. ms erw tube designed with contour ed lumbar support for extra comfort. the back is upholstered using net fabric with high tenacity yarn. 3) hi gh resilience (hr) polyurethane foam : the hr polyurethane foam is moulded with density = 45 (+/-) 2 kg/ meter cube and hardness load 16 (+/-) 2 kgf as per is:7888 for 25 % compression. 4) armrests : the one-pi ece armrests are injection moulded from black co-polymer polypropylene. 5) center tilt synchro mechanis m : the mechanism is designed with the following features: 360 degree revolving type, 17 degree (+/-) 2 d egree maximum tilt on pivot at centre , upright position locking. tilt tension adjustment. 6) penumatic heig ht adjustment : the pneumatic height adjustment has an adjustment stroke of 11.0 (+/-) 0.3cm. 7) telesco pic bellow assembly : the bellow is 3 piece telescopic type and injection moulded in black polypropylene. 8 ) pedestal assembly : the pedestal is injection moulded in black 33% glass-filled nylon 66 and fitted with 5 nos. twin wheel castors. the pedestal is 66.3 (+/-) 0.5cm. pitch-center dia. (76.3 (+/-) 1.0 cm with castors.) 9) twin wheel castor : the twin wheel castors are injection moulded in black nylon. the product should hav e green pro certificate, bifma level 2 compliance, indoor air quality gold (iqa) certificate, griha certifica te.the product should have bis licence. make godrej or similar. [ warranty period: 30 months after the d ate of delivery ] ] , full back revolving chair with headrest. 1) seat assembly : the seat is made up of 1.4 plus/ minus 0.1 cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. full back size : 76.0 cm (w) x 76.0 cm. (d) 114.0 -123.5 cm (h)* seat size : 49.5cm (w)x 51.8cm(d). 2) back assem bly : the back is injection moulded in glass filled polypropylene which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 5.0 plus/minus 0.1 cm. * back size : 44.5 cm(w) x 57.5 cm(h). 3) polyurethane foam : the polyurethane foam for seat is of density = 30 plus/minus 2kg/meter cube. 4) armrests (adjustable) : the height adjustabl e armrest is made of polypropylene and can be adjusted to 6.0 plus or minus 0.1cm height. it also has swiv el and to and fro adjustment with moulded pu armtop. 5) mechanism :the mechanism is designed with the following features: 360 degree revolving type, centre tilt syncro, 4 position (including upright lock) giving o ption of variable tilt angle to the chair. 6) headrest : the headrest is made up of injection moulded polypro pylene which upholstered with foam and fabric. its has an adjustment of 3.0 plus or minus 0.1cm & its asse mbled over mid back chair. 7) penumatic height adjustment : the pneumatic height adjustment is chrome plated with an adjustment stroke of 10.0 plus/minus 0.3cm. 8) pedestal assembly : the pedestal is injection moulded nylon and fitted with 5 nos. twin wheel castors. the pedestal is 66.0 plus or minus 0.5 cm p.c.d. 9 ) twin wheel castor : the twin wheel castors are injection moulded in black polypropylene having 5.0 plus or minus 0.1 cm wheel diameter. the product should have indian desigen mark certificate, green pro certif icate, bifma level 2 compliance, green guard gold certificate (from - ul), indoor air quality level 2 (iqa) certificate, the product should have bis licence. make godrej or similar. [ warranty period: 30 months a fter the date of delivery ] ] , almirah make of specification - half height product size: 900 mm (w) x 450mm (d) x 1167 .5mm (h) construction & material: rigid knock down construction prime quality crca steel - panels from 0. 6 mm thick & front frame 0.8 mm thick. configuration (door) : full height steel hinged door locking & han dle : plastic recessed handle cum cam lock 3 way locking mechanism with shooting bolt arrangement. sh elving : height wise adjustable shelf mounting uniformly distributed load capacity per each full shelf is 80 kg maximum minor : 2 nos. of adjustable full shelves. top: metal top finish: epoxy polyester powder coate d to the thickness of 50 microns (+/-10). the product should have green guard gold certificate (from - ul), the product should have bis licence. make - godrej or similar [ warranty period: 30 months after the dat e of delivery ] ] , open bookcase / display rack overall height 54 inches overall width 36 inches overall dept h 18 inches storage 3 open shelves construction strong and durable panel-based construction side panels full-height side panels top design rounded/curved front corners shelf design fixed horizontal shelves for b ooks, files and display items back panel open-back design, as shown finish premium wood-finish laminate application office, library, study room, reception, home & display area dimensions 54 h x 36 w x 18 d.make godrej or similar. [ warranty period: 30 months after the date of delivery ] ] , l shape executive table overall size 1800 x 795 mm main top : pericle - board ( melamine f inish ) 25 mm top + 15 mm frame , 2mm pvc lipping on top and 0.35mm pvc lipping on frame. modestry panel : 1100 x 405 x 16mm thk pericle board ( melamine finish ) with 0.35 mm thk pvc lipping . drawer point : 500 x 170 x 16 mm particle board ( melamine finish ) with 0.35 mm thk pvc lipping. kbpt : 578 ( w) x 284 ( d) x 16 mm thk particle board ( melamine finish ) with 0.35 mm thk pvc lipping. eru : 1600 ( l) x 500 (w) x 650 (h) all panels are 16mm thk particle board ( melamine finish ) with 0.35 mm thk pvc l ipping. make godrej or similar. [ warranty period: 30 months after the date of delivery ] ] , sledge base with arm chair : 1) seat assembly : the seat is injection moulded in glass filled polypropylene compound which is upholstered with fabric upholstery covers and moulded polyurethane foa m. the back is injection moulded in glass filled polypropylene compound which is upholstered with mesh fa bric (refer colour chart for seat & back upholestry in product catalog). *seat size : 50.0 cm. (w) x 48.0 cm. (d) 53.0 cm. (w) x 39.0cm. (h) *back size : 2) high resilience (hr) polyurethane foam : the hr polyuretha ne seat foam is moulded with density 45 (+/-) 2 kg/meter cube and hardness 16 (+/-) 2 kgf as per is:7888 f or 25 % compression. 3) m.s powder coated frames for sled base chairs : the powder coated ( dft 50 (+/- ) 10 microns) welded tubular main frame is made from 2.54 (+/-) 0.03 cm x 0.2 (+/-) 0.016 cm and 1.9 (+/- ) 0.3mm x 0.12 (+/-) 0.0096 cm m.s.e.r.w. tube. 4) armrests : the armrest are made of glass filled polypro pylene compound and assembled over the tubular frame. the product should have green guard gold certif icate (from - ul). the product should have bis licence. make godrej or similar. [ warranty period: 30 mo nths after the date of delivery ] ]