Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Hospital; Electrical System Or Installation; Service Provider - Gss Ducting:- Supplying Fabrication Installation Testing And Commissioning Of Gi. Sh
Tender Overview
Project Description
Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Hospital; Electrical System Or Installation; Service Provider - Gss Ducting:- Supplying Fabrication Installation Testing And Commissioning Of Gi. Sheet Metal Ducting. Zinc Coated. Complete With All Standard Accessories, G.I.. Hardware, Self Adhesive Elastomeric Foam Gasket, Support Etc As Per Smacna Specification.Gss Ducting:- 20 Swg , Supply And Installation Of Volume Control D Ers, Bypass D Ers. , Providing Aluminium Supply Air Diffusers & Return Air Grills With Volume Control D Ers , 415V Pump Panel With 63A Mccb As Incomer With Phase Indicator And Ammeter & Voltmeter With Selector Switches, 2Noss. Of 25A Mpcb With Dol Starter, Local Push Button Station & Contactor Of Required Rating As Outgoing. , 50 X 50 X 6 Mm Of M.S.Angle. , Providing, Detailing, Fabricating And Fixing At Desired Location Using M.S. Chequered Plates Of Any Thickness And Of Grade Fe250 As Per Specifications And Approved Fabrication Drawings (Which Are To Be Prepared By Contractor And Got Approved From Engineer), Including Transporation Of The Same To Site, Erection At All Heights And Levels, Provision Of Necessary Erection Bolts, Fixing Bolts, Nuts, Washers, Cleats, Stiffeners, And All Necessary Operations Like Preheating As Per Specifications, Straightening, Bending, Cutting, Drilling, Grinding, Machining If Specified, Welding, Grinding And Removing The Welding Burr And Preparing Surface For Painting With Wire Brush Cleaning And Applying Two Coats Of Epoxy Red Oxide Zinc Phosphate Primer Of 30 Microns Each And Two Coats Of Epoxy Corrosion Resistant Enamel Paint Of 30 Microns After Fabrication Including Touching Up With Spray Painting After Erection Etc Complete As Directed By Engineer In Charge. , Providing, Detailing, Fabricating And Fixing At Desired Location Using Hot Rolled Sections And Ms Plates Of Grade Fe 250 As Per Specifications And Approved Fabrication Drawings (Which Are To Be Prepared By Contractor And Got Approved From Engineer), Transporting To Site And Erecting Structural Steel Members For All Heights & At All Levels Including Provision Of Necessary Erection Bolts, Fixing Bolts, Nuts, Washers, Cleats, Stiffeners, Gussets, Base Plate, And All Necessary Fixtures And Operations Likepreheating As Per Specifications, Straightening, Bending, Cutting, Drilling, Grinding, Machining If Specified, Welding, Grinding And Removing The Welding Burr And Preparing Surface For Painting With Wire Brush Cleaning And Applying Two Coats Of Epoxy Red Oxide Zinc Phosphate Primer Of 30 Microns Each And Two Coats Of Epoxy Corrosion Resistant Enamel Paint Of 30 Microns After Fabrication Including Touching Up With Spray Painting After Erection Etc Complete As Directed By Engineer In Charge. (The Qty. For This Item Shall Be Measured For Gusset Plates, Base Plates, Bolts In M.T.) , Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) , 1St Category Cu Armoured Cables Frlsz Outer Sheathed- 6Cx 6Sq.Mm , 1St Category Cu Armoured Cables Frlsz Outer Sheathed- 4C X 16 Sq.Mm , Cable End Termination For Copper Cables – 4C X 16 Sq.Mm , 100A Tpn Mccb , Providing & Fixing Of Canvas Connections For Units. , Use Of Scarf Folding As Per Space Accommodation (4Ftx8ft) For Ug To Terrace Of C Wing And F Wing , Sitc Of Centrifugal Exhaust Blower Assembly For Capacity Of Approx. 8000 Cum / Hr. And Shall Be Fabricated From Ss 304 Material. The Blower Assembly Shall Have Silencer With Anti-Vibration Absorbed To Reduce Noise With 10 Hp Motor Arrangement.
BOQ
| Sl. No. | Item Title | Item Description |
| 1 | GSS Ducting:- Supplying fabrication installation testing and commissioning of GI. Sheet metal ducting. Zinc coated. Complete with all Standard Accessories, G.I.. Hardware, Self Adhesive elastomeric foam gasket, Support etc as per SMACNA specification.GSS Ducting:- 20 SWG | GSS Ducting:- Supplying fabrication installation testing and commissioning of GI. Sheet metal ducting. Zinc coated. Complete with all Standard Accessories, G.I.. Hardware, Self Adhesive elastomeric foam gasket, Support etc as per SMACNA specification.GSS Ducting:- 20 SWG |
| 2 | Supply and installation of volume control dampers, bypass dampers. | Supply and installation of volume control dampers, bypass dampers. |
| 3 | Providing aluminium supply air diffusers & return air grills with volume control dampers | Providing aluminium supply air diffusers & return air grills with volume control dampers |
| 4 | 415V Pump panel with 63A MCCB as incomer with phase indicator and ammeter & voltmeter with selector switches, 2Noss. Of 25A MPCB with DOL Starter, local push button station & contactor of required rating as outgoing. | 415V Pump panel with 63A MCCB as incomer with phase indicator and ammeter & voltmeter with selector switches, 2Noss. Of 25A MPCB with DOL Starter, local push button station & contactor of required rating as outgoing. |
| 5 | 50 x 50 x 6 mm of M.S.angle. | 50 x 50 x 6 mm of M.S.angle. |
| 6 | Providing, detailing, fabricating and fixing at desired location using M.S. chequered Plates of any thickness and of grade Fe250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transporation of the same to site, erection at all heights and levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. | Providing, detailing, fabricating and fixing at desired location using M.S. chequered Plates of any thickness and of grade Fe250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transporation of the same to site, erection at all heights and levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. |
| 7 | Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations likepreheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. (The qty. for this item shall be measured for gusset plates, base plates, bolts in M.T.) | Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations likepreheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. (The qty. for this item shall be measured for gusset plates, base plates, bolts in M.T.) |
| 8 | Cement mortar 1:3 (1 cement : 3 coarse sand) | Cement mortar 1:3 (1 cement : 3 coarse sand) |
| 9 | 1st category Cu armoured cables FRLSZ outer sheathed- 6Cx 6Sq.mm | 1st category Cu armoured cables FRLSZ outer sheathed- 6Cx 6Sq.mm |
| 10 | 1st category Cu armoured cables FRLSZ outer sheathed- 4C x 16 Sq.mm | 1st category Cu armoured cables FRLSZ outer sheathed- 4C x 16 Sq.mm |
| 11 | Cable End Termination For Copper Cables – 4C x 16 Sq.mm | Cable End Termination For Copper Cables – 4C x 16 Sq.mm |
| 12 | 100A TPN MCCB | 100A TPN MCCB |
| 13 | Providing & fixing of Canvas Connections for units. | Providing & fixing of Canvas Connections for units. |
| 14 | Use of scarf folding as per space accommodation (4FtX8Ft) for UG to terrace of 'C' wing and 'F' wing | Use of scarf folding as per space accommodation (4FtX8Ft) for UG to terrace of 'C' wing and 'F' wing |
| 15 | SITC of centrifugal exhaust blower assembly for capacity of approx. 8000 CuM / Hr. and shall be fabricated from SS 304 material. The blower assembly shall have silencer with anti-vibration absorbed to reduce noise with 10 HP motor arrangement. | SITC of centrifugal exhaust blower assembly for capacity of approx. 8000 CuM / Hr. and shall be fabricated from SS 304 material. The blower assembly shall have silencer with anti-vibration absorbed to reduce noise with 10 HP motor arrangement. |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender