Tender For Construction Of Kalyan Mandap At Tangarpali Of Tangarpali Gp.
Tender Value
70.75 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
7 days left
EMD
70755
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Kalyan Mandap At Tangarpali Of Tangarpali Gp.
BOQ
| Sl. No. | Item Description |
| 1 | Const. of Kalyan Mandap at Tangarpali of Tangarpali GP. |
| 2 | Earthwork in excavation of foundation in hard soil mixed with gravels including dressing and levelling the bed up to the required depth & removing the excavated earth & depositing the same away from the work site within initial lead of 50 mtr & initial lift of 1.5 mtr, including cost of labour T&P articles required for the work including shoring, shuttering, propping & dewatering if required, etc. complete in all respect as per the specification & direction of the Engineer-in-Charge. |
| 3 | Supplying, filling in foundation and plinth with sand including watering and ramming, including cost, conveyance, royalties, taxes of the materials and labour with T&P required for the work etc. complete as directed by the Engineer-in-Charge |
| 4 | Cement Concrete (1:3:6) using 40mm size hard granite metal (C.B.) approved quality from approved quarry including hoisting laying including cost, carriage, royalty,cost of labour T.&P. etc complete |
| 5 | PCC(1:2:4) with H.G crusher broken chips including hoisting laying including cost, carriage, royalty,cost of labour T.&P. etc complete |
| 6 | Fly ash Brick masonry using good fly ash bricks of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm.with dimensional tolerance upto 2 % in cement mortar of mix (1:6) in foundation and plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. |
| 7 | Fly ash Brick masonry using good fly ash bricks of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm.with dimensional tolerance upto 2 % in cement mortar of mix (1:6) in Super Structure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. |
| 8 | Brick masonary work with Fly Ash bricks in cement mortar (1:4) in super structure inlcuding cost, carriage & royalty of materials etc. complete as per the direction of Engineer-in-charge. |
| 9 | R.C.C. work of M-20 having minimum compressive strength (in work test) 200kg./cm2 in 15cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12mm to 20mm size (1/2” to 3/4”) crusher broken hard black granite chips of 20mm size (not to exceed 25%) of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary as per direction of the Engineer-in-charge including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills etc complete as drawing design and direction of Engineer-in-charge. |
| 10 | Providing, Cutting, straightening coiled or bent up Fe-415 grade SAIL Brand MS ROD welding or jointing if necessary, bending, binding, tying the grills as required for RCC works, and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods, Fe-415 or equivalent and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer-in-Charge (payment will be made according to the actual weight of M.S. rod, Fe-415 or equivalent consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost) as per the direction of Engineer-in-charge. |
| 11 | Centring shuttering for RCC Worksa) Column Base footing |
| 12 | c) Lintel Band |
| 13 | d) Column & Beam |
| 14 | e) Roof slab,chhaja |
| 15 | f) Stair case |
| 16 | g) Fins |
| 17 | Providing 12mm thick cement plaster to the outside surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and levels as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge |
| 18 | Providing 16mm thick cement plaster to the inside surface of brick masonary wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per specification and direction of the Engineer-in-charge. |
| 19 | 12mm thick C.P. in C.M.(1:4) over brick masonary to the smooth surface with neat cement punning including watering curing, cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of Engg-in -charge. |
| 20 | 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 21 | Supplying, fitting and fixing vitrified tile (Printed) in floors of size 600mm x 600mm of approved make conformaing to IS : 13755 laid on 20 mm thick cement mortar (1:4) (1 cement :4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of E.I.C. |
| 22 | Fixing Vitrified tiles (size 600mmx600mm) (Printed) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. |
| 23 | Fixing glazzed tiles (20cmx30cm / 20cm x 20cm special plain/printed series ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including cost of tiles. |
| 24 | Fixing glazzed tiles (30cmx30cm / 40cm x 40cm special plain/printed series ceramic tiles of premium grade having thickness 7 mm to 8mm confirming to IS 13755) in floors treads or steps and landing on 20 mm thick bed of cement mortar 1:4 (1cement : 4sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cost of tiles. |
| 25 | Fixing Chequred tiles in floors treads or steps and on 20mm thick bed of cement mortar 1:4 (1cement : 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cost, carriage, royalty & taxes of all materials, cost of all labours T&P etc complete. |
| 26 | 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard crusher broken granite chips on new work including watering curing cost of all materials, water-proofing compounds, T.& P. required for the works etc complete. |
| 27 | Painting 2 coats with any approved paint in iron works including sand papering, polishing surfaces, cost of paints, cost of all labour, T&P, etc complete in all floors as per direction of E.I.C. |
| 28 | Finishing surface of walls with Cement based wall putty & making smooth to recive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc. complete. |
| 29 | Priming 1 coat with wall primer water bond cement primer including all labour, materials, T&P etc. complete. |
| 30 | Finishing to the exposed surfaces of wall with weather coat of any approved shade on new work 2 coats to give an even shade including cost of weather coat all cost of all labours and T&P etc. complete . |
| 31 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. |
| 32 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete |
| 33 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 34 | Supplying , fitting and fixing of Mild steel and put upfor frames & shutters of Doors and Windows fixing in position with cost,coveyance,taxes of all materials,labours and T & P required for the work etc. |
| 35 | Supplying,fitting and fixing of Un-plasticised poly vinyl chloride (UPVC)(FENESTA/NCL VEKA LTD) casement Door-60 series duly manfactured using UPVC reinforced profiles of 60mmx55mmx2.5mm for outer frames,102mmx60mmx2.25mm for casement door sash profile and 74mmx60mmx2.5mm mullion profile capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minium thickness of 2.0mm prefabricated &welded through fusion welding the door sash shall be fitted with 12mm thick WPC board of green ply make duly fixed with EPDM weathering seal resistant accessories like,clipping locking system made of Aluminium 1 no per set of sashes and the systemis to be installed including cost,convyance of all materials etc. |
| 36 | Providing,fitting and fixing of False Celling with Aluminium anodised T-Section No3215 with 2'-0\\" centre to centre ,L-Section No 1705 upto 15 micron on 4 walls tobe fixed by means of steel screws and pvc plug and the Aluminium grid of 2'-0\\" x2'-0\\" with 12mm thick Prelaminated Novapan board suspended from celling including cost of all materials,cost of all labour T & P etc.complete. |
| 37 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect. (in all floor) |
| 38 | Electrcal Works Recessed wiring to light point/fan point/exhaust point/ Wall Fan Point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2) |
| 39 | -do- (Gr.B) (1.1.2-1.24.2) |
| 40 | -do- (Gr.C) (1.1.3-1.24.2) |
| 41 | S/F of M.S. Box for 2 Module 18 swg |
| 42 | S/F of M.S. Box for 4 Module 18 swg |
| 43 | S/F of M.S. Box for 8 Module 18 swg |
| 44 | S/F of M.S. Box for12 Module 18 swg |
| 45 | S/F of 3 pin 5/6 A.F.T switch and.Socket on existing board (Modular type) (1.25.1+1.25.4) |
| 46 | S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4) |
| 47 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 48 | S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Equivalent) |
| 49 | S/F of 15A Socket on 2 module for AC |
| 50 | S/F of 2 Modular box with 5A modular Socket outlet of ISI marked on Separate board for Wall fan |
| 51 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required for Inverter Connection |
| 52 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1) |
| 53 | -do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 54 | -do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 55 | -do- 2x6 sqmm + 1 x 2.5 sqmm (1.8.4) |
| 56 | -do- 4x6 sqmm + 2 x 2.5 sqmm (1.8.10) |
| 57 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 58 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 59 | S/F of 32A rating \\"C\\" Series DP MCB (Make: L&T/Havells/C&S or Equivalent) |
| 60 | Supply, Installation testing and commissioning of 63 Amp. IC TPN Main Switches (IS13940 part 3/1993) with supply of metal box of following capacity on existing surface/Wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make: HPL / L&T / C&S / Havells / Seimens / RK / Anchor / Havells) (2.15.3) |
| 61 | Supply of 250 mm x 300 mm x100 mm deep(1.24.13) for fixing 63 Amp ICTPN Main Switch. |
| 62 | S/F of 100 Amp. T.P.N. Cupper Bus Bar with all connections (Make:BENLO) |
| 63 | S/F of MCB 8 way Double door (2.3.6) |
| 64 | S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28) |
| 65 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 66 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 67 | S/F of Fan hook S, Type on ceiling. |
| 68 | S/F of step type modular fan regulator |
| 69 | S/F of 12 Watt. LED bulb.(Make Havells/Polycab or Equivalent) |
| 70 | S/F of 300 exhaust fan with all accessories and connections(Make-Usha-Aero Clean plus DBB/Polycab-Fress on DBB/Cromton-Trans Air12\\" reversible/Havells-Ventil Air DS(HS)/Ancor-Anmol DelusR/Orient-Power Flow DBB |
| 71 | S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS) |
| 72 | S/F of 400mm A.C. wall fan with all accessories (Make:Usha-Max air ultra/Polycab-Aery HS/Crompton-wmhiflo wave /Havels-Accelero HS/Anchor-Altrix HS/Orient- Wall 43/ Great white- WYNO Pro HS) |
| 73 | S/F of 18-25 watt LED Tube light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL) |
| 74 | Supply & Fixing of 60 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 75 | Supply of 3.5core 25 sqmm PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade Armoured cable ( MAKE-HAVELLS/polycab/RR Kable/Rhino cable/equivalent) |
| 76 | Laying of MV Cable upto 25sqmm in ground (5.1.1) |
| 77 | Laying of MV cable upto 25sqmm on surface (5.5.1) |
| 78 | S/F of 40 mm HDPE pipe for laying & protection of cable(Make:Sudhakar or Equivalent) |
| 79 | S/F of 18W Recess Mount(Round/Square) Type Ceiling light (Havels/crompton/Polycab or Equivalent) |
| 80 | PH WORKSWATER SUPPLY.Supplying, installing, fixing, jointing, testing and commissioning of approved make. Chlorinated Polyvinyl Chloride pipes (CPVC) SDR.11 pipes confirming to ASTM standards with necessary fittings for inetrnal toilet water supply upto 50 dia , and above 50mm dia pipe schedule 40 with fitting shall be schedule 80 ASTM IPS. The fittings and specials such as tees, elbows,couplers, bends, enlargers etc.,m with CPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, Brass FPT elbow etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement martor 1:1 restore the same original condition neately as directed by the Engineer in-charge. Joints to be made with CPVC solvent cement up to 50mm dia as per ASTM D-2846 and above 50mm dia primer P-70, and solvent confirming to ASTM F-4931 / 724 All exposed pipe shall be painted with latex paint. (for shafts, basement ceiling ringmain Terrace & PRM).The rate shall include necessary GI supports, GI grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. Make:- Supreme/Ashirbad/AKG. GROUND FLOOR20 mm dia C-PVC pipe (Oriplast/Supreme) |
| 81 | 25 mm dia C-PVC pipe (Oriplast/Supreme) |
| 82 | 32 mm dia C-PVC pipe (Oriplast/Supreme) |
| 83 | 20 mm dia C-PVC pipe (Oriplast/Supreme) FIRST FLOOR |
| 84 | 25 mm dia C-PVC pipe (Oriplast/Supreme) |
| 85 | 32 mm dia C-PVC pipe (Oriplast/Supreme) |
| 86 | 40 mm dia C-PVC pipe (Oriplast/Supreme) |
| 87 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of Engineer-in-charge. 250 mm thick wall GROUND FLOOR |
| 88 | FIRST FLOOR |
| 89 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. GROUND FLOOR |
| 90 | FIRST FLOOR |
| 91 | SANITARY FIXTURES.Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C. pan) of Hindware/Jaquar/Parryware with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer-In-Charge. EWC with 'p' / S trap plain CERA CONVENTIONAL (520x360x390) CAT. NO. S105310 STRAP |
| 92 | Supplying all materials, labour, T&P and fixing standard sized two way Bib cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP Two way bib cock with Flange Jaquar FUS-29041, Page-58. |
| 93 | Supplying all materials, labour T&P and fixing wash basins of Hindware/Jaquar/Parryware with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer-In-Charge. CERA COUNSEL 510x400mm Cat No.S2040101 Wash Basin Cat No. S2090101 Pedestal |
| 94 | Supplying all materials, labour, T&P and fixing standard sized pillar cock of of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 15mm dia brass pillar cock (Cera PRS-031) |
| 95 | Supplying, installing, testing and commissioning of approved make White Viterous urinals 3.8 LPM supported by CI/MS bracket duly painted, including CP brass waste with dome type grating, CP cast brass bottle trap with extension piece, wall flanges, automatic flushing systems for urinal to ensure flusing only immediately after use, comprising of all plumbing, electronic and electrical items. CP brass flush pipe with CP brass elbow, CP brass spreader, CP wall flange, infrared photo cells (Sensor), eyes electrically operated solenoid valve, gate valve, black box and necessary wiring in conduit from solenoid value to black box and to mains etc, complete. Including necessary wall cutting/chasing and making good, as required. CERA CARMINA 420x395x635mm Cat.No. s4020102 |
| 96 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth |
| 97 | Supplying, installing, testing and commissioning of approved make Pressmatic urinals flush valve. Including necessary wall cutting/chasing and making good, as required. (Make-Hindware,Cat. No.: F310008CP) |
| 98 | Supplying all materials, labour, T&P and fixing standard sized Robe Hook of Hindware/Jaquar/Parryware complete with all as per specification and direction of the Engineer in charge. |
| 99 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia angular Stop cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP angle stop cock with wall flange Jaquar - FUS-29053, Page-58. |
| 100 | Fixing of 40mm dia Brass/GM Fulway Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge. 40mm dia brass or gun metal full way valve.(Make- Shakti or equivalent.) |
| 101 | Fixing of 32mm dia Brass/GM Fulway Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge. 32mm dia brass or gun metal full way valve.(Make- Shakti or equivalent.) |
| 102 | Fixing of 25mm dia Brass/GM Fulway Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge. 32mm dia brass or gun metal full way valve.(Make- Shakti or equivalent.) |
| 103 | Fixing Rotational moulded Poly Propelene double layer cylindrical vertical water storage tanks confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fitting and providing extra sockets and jam nuts, fixing ball valve etc,including hosting upto a height of 5 mtr above ground level and placing the tank to the required postion etc all complete as per specification and direction of the Er-in-charge. 2000 Ltr |
| 104 | Installation of Pump. Supply & Installation of single phase 1 HP electric driven pump with motor including all as per direction of EIC . |
| 105 | Supplyiing all materials for lowering in Bore High Density Polyetthylene pipes conforming to IS 4984 -1995 and specials of following outside diameter and material frade PE 63 and jointing by Fusion welding methood including testing as per specification complete 32mm dia HDPE pipe including all cost complete. |
| 106 | Supply of 2.55 mm Sqr 3core PVC |
| 107 | Supply of 4 mm Sqr 3core PVC |
| 108 | Brick masonary wash basin with tile and fitting and fixing of taps and Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender