Tender For Improvement Works By Providing Aluminium Partition In-Between Computer Service Room And Call Centre In First Floor, Central Office Building At Mannarpuram Premises.
Tender Value
1.50 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
10 days left
EMD
1500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruchirappalli → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Works By Providing Aluminium Partition In-Between Computer Service Room And Call Centre In First Floor, Central Office Building At Mannarpuram Premises.
BOQ
| Sl. No. | Item Description |
| 1 | Fabricating Supplying and fixing in position of Aluminium anodised of natural colour matt finish 1/2 fixed glazing 1/2 prelaminated board of Aluminium partition of size 1.20m x2.10 m with required rubber beading etc, including necessary dismantling holes in RCC column, masonry wherever in necessary as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns etc., complete. |
| 2 | Fabricating Supplying and fixing in position of Aluminium anodised (powder coated) single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings average anatic film thickness of 15 microns etc., complete. (With automatic door closure and hinges). |
| 3 | Wiringwith2x1.5sq.mm.PVCinsulatedsinglecoreunsheathedFRLScopperconductorcableof1100Vgradeinsuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earthwire connection of 1.5sq.mm copper wire for open PVC lightpoint/fanpoint (forelectronic regulator) ( SD16 ) |
| 4 | Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point ( SD36 ) |
| 5 | Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) |
| 6 | supply and fixing of 1200mm (48\\") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 1 metre down rod on the existing fan clamp |
| 7 | Supply and fixing of 18W 4 feet LED fitting complete with TW round blocks on wall or ceiling with LED and PVC unsheathed copper leads from terminals to the fitting. |
| 8 | Providing plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed outside using fevicol along with necessary screws, etc., as directed by the Departmental Officers. The design pattern, plywood, laminate sheet and other materials should be got approved from the Assistant Executive Engineer befoe use on work. |
| 9 | Providing laminated aheet of 0.8mm thick fixed over the plywood on table using fevicol along with necessary screws etc., as directed by the Departmental officers. The design pattern, plywood, laminate sheet and other material should be got approved from the Assistant Executive Engineer before use on work. |
| 10 | Providing of Medium Desity Fibre (MDF) Board - External Grade - both side pre-laminated 12mm thick on computer Table as directed by the Engineer at site. |
| 11 | SGST & CGST (If applicable quote the value, if not enter '0') |
| 12 | IGST (If applicable quote the value, if not enter '0') Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender