Housing Urban and Rular Development Government Departments Closing in 5 days TDR #57576116

Tender for Tender for New Construction Of Shamshanghat In Village Shahpura, District Rampur, In The Year 2026-27. New Construction Under Rajya Sadak Nidhi Scheme

Issued by Government Departments · Rampur, Uttar Pradesh
Tender Value
68 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
5 days left
EMD
5.40 Lakhs
Bank guarantee accepted
Document Fee
2354
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Rampur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for New Construction Of Shamshanghat In Village Shahpura, District Rampur, In The Year 2026-27. New Construction Under Rajya Sadak Nidhi Scheme

BOQ

Name of Work:- New Construction Under Rajya Sadak Nidhi Scheme:- New Construction of Shamshanghat in Village Shahpura, District R ur, in the year 2026-27.
Sl. No. Item Description
1Excavation for roadway in soil with hydraulic excavator 0.9 Cubic Meter bucket capacity includind cutting and loading in tippers,trimming bottom and side slopes, in accordance with requirments of lines grades and cross-section and transporting to the embankment location with a lift upto 1.5m and lead upto 1000 m as per Technical Specification Clause 302.3 Including all T&P, Labour, Material, Royalty Tax but excluding GST
2Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 Including all T&P, Labour, Material, Royalty Tax but excluding GST
3Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. Including all T&P, Labour, Material, Royalty Tax but excluding GST
4Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. Including all T&P, Labour, Material, Royalty Tax but excluding GST
5Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. Including all T&P, Labour, Material, Royalty Tax but excluding GST
6Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 Including all T&P, Labour, Material, Royalty Tax but excluding GST
7Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I.P.C.C grade M 10, Nominal mix 1:3:6 Including all T&P, Labour, Material, Royalty Tax but excluding GST
8Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 III.R.C.C. grade M 20 Including all T&P, Labour, Material, Royalty Tax but excluding GST
9Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications Including all T&P, Labour, Material, Royalty Tax but excluding GST
10Brick masonry work in cement mortar 1:4 (one cement and four coarse sand) in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 Including all T&P, Labour, Material, Royalty Tax but excluding GST
11Pointing with cement mortar (1:3) on brick work in parapet as per technical specifications Clause 613.3 and 1208.4 Including all T&P, Labour, Material, Royalty Tax but excluding GST
12Plastering with cement mortar (1:4) 15 mm thick on brick work in parapet as per technical specifications Clauses 613.4 and 1208.4 Including all T&P, Labour, Material, Royalty Tax but excluding GST
13Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row / Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works,backfilling, concrete and masonry works in head walls and parapets Clause 1106. Including all T&P, Labour, Material, Royalty Tax but excluding GST
14Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (Ordinary Kiloeter stone) Including all T&P, Labour, Material, Royalty Tax but excluding GST
15Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (Hectometer stone) Including all T&P, Labour, Material, Royalty Tax but excluding GST
16Supply of Informatory sign Board Size 4X3, Inaugration etc including all material, labour etc proper completion of the work. Including all T&P, Labour, Material, Royalty Tax but excluding GST
17Ist Year Maintainance (@0% of Total Work Amount of S.No. 1 to S.No.16)
18IInd Year Maintainance (@0.25% of Total Work Amount of S.No. 1 to S.No.16)
19IIIrd Year Maintainance (@0.50% of Total Work Amount of S.No. 1 to S.No.16)
20IVth Year Maintainance (@0.75% of Total Work Amount of S.No. 1 to S.No.16)
21Vth Year Maintainance (@1.0% of Total Work Amount of S.No. 1 to S.No.16) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57576116
AUTHORITY Government Departments
TENDER VALUE 68 Lakhs
LAST DATE 25-09-2026
Authority
Authority Name Public Works Department
Work Description Tender for New Construction Of Shamshanghat In Village Shahpura, District Rampur, In The Year 2026-27. New Construction Under Rajya Sadak Nidhi Scheme
Basic Detail
Tender No 4890/ETEN_RC/26_27_D_27_08_26
Bidding Type Tender
Location
City Rampur
State Uttar Pradesh
Key Dates
Publish Date 18 Sep 2026
Submission Date 25 Sep 2026
Open Date 25 Sep 2026
Finance
Tender Value 68 Lakhs
Tender Fee 2354
EMD 5.40 Lakhs
Exemption Available
Document List
16dc6780-ae6c-4596-82bc-de4322358871.html
1T2.pdf
BOQ_2232681.xls
Tendernotice_1.pdf
Tendernotice_2 (16).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Sep 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

16dc6780-ae6c-4596-82bc-de4322358871.html

pdf

1T2.pdf

xls

BOQ_2232681.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2 (16).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders