Tender For Repair, Maintenance And Upgradation Of Meerut Circle Office Building, Meerut
Tender Value
37.69 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
10 days left
EMD
1.13 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Maintenance And Upgradation Of Meerut Circle Office Building, Meerut
BOQ
| Sl. No. | Item Description |
| 1 | ITEMS TO BE EXECUTED |
| 2 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 4 | Providing and Applying 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 5 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 6 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 7 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints ( Size of Tile 600x600 mm ) |
| 8 | Providing of vertical blinds including installation with complete fittings |
| 9 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. |
| 10 | providing, supplying and installation of electrical fittings, complete with all necessary accessories, wiring, cables, switches, sockets, connectors, mounting arrangements, supports, labour, testing and commissioning etc complete 1. Havells TPN Double Door DB Box (IP65) Havells Tier-1 weatherproof out-door sheet-steel enclosure, rustresistant powder coated, fitted with synthetic rubber sealing gaskets. |
| 11 | 2. Schneider Electric 4-Pole RCCB (Shock Protection) Acti9 range 4P, 40A Current-Leakage circuit breaker with 30mA high-sensitivity trip threshold for core protection against life shocks |
| 12 | 3. Schneider Electric Single Pole MCBs Easy9 Series high-breaking capacity 10KA MCBs (6A to 32A variants dynamically balanced across Red, Yellow, and Blue phases |
| 13 | 4. Havells LifeLine FR-LSH Copper Wires Flame Retardant Low Smoke Halogen pure electrolytic copper flexible wiring for heavy interior phase loops (4.0 sq.mm ) |
| 14 | 5. Havells LifeLine FR-LSH Copper Wires Flame Retardant Low Smoke Halogen pure electrolytic copper flexible wiring for heavy interior phase loops (6.00 sq.mm ) |
| 15 | 6. Precision 25mm Heavy Mechanical Stress (HMS) PVC Pipes ( 3 mtr ) |
| 16 | 7. 25mm / PG25 Polyamide IP68 Waterproof Cable Glands ( Pack of 20 ) |
| 17 | 8. Exhaust fan |
| 18 | 9. Regulator |
| 19 | 10. Alarm Bell |
| 20 | 1. Havells Festiva HS (Decorative) |
| 21 | 11. Havells Festiva HS (Decorative) |
| 22 | 12. Dismantling & Technical Setup Labor Complete manual decommissioning of existing wooden boards and porcelain kits, dressing weathered incoming lines, phase load balancing, and secure testing |
| 23 | Providing, supplying, and installing sanitary fittings, complete with all necessary mounting arrangements, hardware, supports, accessories, testing, and commissioning, as per specifications and instructions of the Engineer-in-Charge 1. Hindware Sleek / Parryware Slimline Dual Flush Cistern High-gloss UVresistant premium polymer outer body tank with complete internal dual-flush kit assembly layout |
| 24 | 2. Heavy Duty Brass Angle Valve ( Cera) 0.5-inch premium chromeplated solid brass quarter-turn shutoff control cock valve for specialized isolation feed loops |
| 25 | 3. Internal PVC Flush Bend & Gasket Rings 40mm heavy-gauge white PVC flush output discharge siphon connection pipe complete with top/bottom leakproof sealing rubber cuffs. |
| 26 | 4. M-Seal / Teflon Sealant Tapes & Mounting Fasteners High-grade silicone structural adhesive, thread sealant rolls, and corrosion-proof stainless steel expansion wall anchor bolts |
| 27 | 5. 500L Main Tank ( Lid Sintex) |
| 28 | 6. 250L Loft Tank Lid Sintex |
| 29 | 7. Sintex Pure Antimicrobial (Advanced 4P Protection) |
| 30 | 8. Hindware Italian Collection Health Faucet for Bathroom|Made of ABS|Comes with 1.2m SS Tube |
| 31 | 9. Labour Charges |
| 32 | Providing and fixing structural mild steel (MS) gate of size 2.0 m × 0.85 m, made of 50 mm × 50 mm × 6 mm MS angle iron for the outer main frame, miter-cut and welded at corners, with internal bracing of 25 mm × 25 mm × 3 mm MS square tubes. Infill panel to consist of 1 inch × 1-inch welded MS wire mesh (jali) securely tacked to the framework. Item includes providing all necessary heavy-duty hinges (kabza), locking latch (kunda), and tower bolts; preparing surfaces by grinding welds smooth; applying one coat of approved anti-corrosive red oxide primer and two coats of synthetic enamel paint; transporting to site; and fixing securely in position by welding or anchoring to existing masonry/concrete columns with minor civil grouting touch-ups as required. All complete as per direction of the Engineer-in-Charge. |
| 33 | Providing and fixing powder-coated / enamel-painted CR/Tata Steel sheet (20 gauge) shelf cover on brick/RCC almirah already constructed in the building, as per the approved size and design, including necessary cutting, bending, welding, drilling, and fixing with screws/fasteners, and finishing complete in all respects. The work shall include supply of CR/Tata Steel sheet of required thickness, powder coating or enamel painting as specified, preparation of surface, fabrication to match the almirah dimensions, and installation with proper alignment, ensuring durability, corrosion resistance, and neat appearance, all complete as per specifications and direction of Engineer-in-Charge |
| 34 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 35 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase |
| 36 | Providing and fixing fly-proof Stainless Steel Grade 304 wire gauge mesh, woven with 0.5 mm diameter wire and maintaining a 1.4 mm wide aperture, securely held in position using a matching Mild Steel (MS) angle section frame . The item includes cutting the SS 304 mesh to precision, fabricating the MS angle framing to size, drilling, fixing with necessary MS screws, rivets, or spot welding as required, grinding all steel joints smooth, applying one coat of anti-corrosive red oxide primer and two coats of approved synthetic enamel paint on the MS components, all complete as per the drawings, specifications, and directions of the Engineer-in-Charge. |
| 37 | Providing and fixing aluminium door frame and shutters made of standard extruded tubular sections, upper half with 5 mm thick glass pane glazing using EPDM gaskets, lower half with pre-laminated sheet, including all necessary hinges, handles, lock assemblies, and hardware adjustments, all complete as per the architectural drawings and the directions of the Engineer in-Charge |
| 38 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge |
| 39 | Laying cement cocrete under existing interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost) |
| 40 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 41 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 42 | Providing and fixing 4-inch nominal bore Mild Steel (MS) pipe /posts standing exactly 1.0 meter high above ground level (with an additional required depth embedded below ground for structural stability), spaced exactly at 3 meters center-to-center, fitted with two integrated MS hooks securely welded per pipe for wire/chain routing. The system features a fencing layout of Galvanized Iron (GI) line wire stretched taut between the posts. The item includes cutting the MS pipes to structural lengths, fabricating and welding the hooks, excavating pits in ordinary or hard soil, erecting the posts in perfect vertical alignment, grouting the base with cement concrete (1:3:6 or as specified), stringing, tensioning, and tying the GI line wires securely through the hooks. All fabricated MS pipe surfaces must be thoroughly cleaned, ground smooth, and coated with one coat of anti-corrosive red oxide primer followed by two coats of approved synthetic enamel paint, all complete as per the drawings and directions of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender