Tender For Special Repairs To Otm Accommodation Building No P-215 At New Mil Stn Gangtok
Tender Value
78.65 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
26 days left
EMD
1.43 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gangtok → sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Otm Accommodation Building No P-215 At New Mil Stn Gangtok
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of old plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 3 | Taking down cement or cement lime plaster, any description on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 5 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for incl removing and cleaning APP membrance on roof surface complete all as specified and directed |
| 6 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not specifically provided for, complete all as specified and as directed. |
| 7 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 9 | Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame), complete all as specified and directed. |
| 10 | Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame), complete all as specified and directed. |
| 11 | M&L for 75 mm thick plain cement concrete(1:3:6), type C2 (40 mm graded stone aggregate) as in flooring, plinth protection, hard standing, path etc including finish the surface even and smooth with using extra cement including panels not exc 2.00 Sqm each including construction joint at suitable interval and each corner and filled with bituminous mastic filling ( 1 part bitumen and 3 part sand) CM 1:6 complete all as specified and directed. |
| 12 | M&L for 25mm thick plain cement concrete(1:2:4), type B-0, (using 12.5mm graded stone aggregate) as in sub-base, sub-floors, floors, pavings, roof treatment etc. and finishing the surface rough to receive screed bed, complete all as specified and directed. |
| 13 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 14 | S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 15 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 16 | M&L for pre-cast cement concrete block masonry (1:3:6), type C-1 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6), complete all as specified and as directed. |
| 17 | M&L for 15 mm thick rendering in cement mortar (1:6) on stone masonry surfaces or surfaces on fair faces of brick or concrete surface work, rendering finished even and smooth (without using extra cement), complete all as specified and directed. |
| 18 | M&L preparing of new plastered surface of walls and applying two coats of distemper oil emulsion(OBD), white or tinted, complete all as specified and directed. |
| 19 | M&L for plain cement concrete (1:3:6), type C-1 (using 20 mm graded crushed stone aggregate) as in bed blocks for grouting hold fasts, coping, filling in pressed steel chowkat or similar work including weathering, slightly rounded or chamfered angles and throating, including necessary form work, complete all as specified and directed. |
| 20 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments over and including 15mm thick screed bed or bedding layer in cement mortar (1:6), complete all as specified and directed. |
| 21 | M&L for 15 mm thick rendering in cement mortar (1:6) on stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and smooth (without using extra cement), complete all as specified and directed. |
| 22 | M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces in ceilings and finished even and smooth (without using extra lime or cement), complete all as specified and directed. |
| 23 | M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash in ceiling, complete all as specified and directed. |
| 24 | M&L for preparation of new plastered surfaces of walls applying two coats of distemper, oil emulsion, white or tinted over old wall surface on over primer complete all as specified and directed. |
| 25 | Supply & fixing GI powder coated snap grid frame work for false ceiling 600x600mm size fixed to walls with rawl plug and screws and hanged to roof comprising of wall/cleat angle of size 20x20x0.3mm ,size of cross tee 24x23x0.30 mm and main tee 28x23x0.3mm with 1mm dia GI suspender of suitable lenght and butterfly clips completed all as specified and directed. |
| 26 | M&L for 4 mm thick non-AC-E Board of size (595x595mm) fixed with staple on snap grid as in ceilings with and including dusting of surface complete all as specified and as directed. |
| 27 | S&F powder coated aluminium sliding window (three track) with alumium frame of section 62.30 x 44.50 x 1.5 mm with shutter stiles rail of aluminium section of size 47.62 x 44.45 x 1.5mm thick including jointing cleat for fixing binder hardware glazing clips rubber packing for air lock purpose anodized aluminuim strip bearing screw etc for fixing glass pans in frame shutter covered with fully selected quality glass 4mm thick tinted/plain glass with rubber packing and locking arragement and fly proof shutter of same size with aluminium wire mesh complete all as specified and as directed. |
| 28 | All as per item No 27 above but openable/fix type window/ventilator complete all as specified and directed. |
| 29 | Applying two coat of DR Fixit fles 113 of DR Fixit for sunken portion treatment all as specified and directed. |
| 30 | S&F of second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 31 | S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. |
| 32 | S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and as directed. |
| 33 | S&F 35mm thick 2nd class hardwood rail and style Factory made plain frames, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-1), kiln seasoned and chemically treated : supplied and fitted to chowkhats, complete all as specified and directed. |
| 34 | S&F of 35 mm thick (batten thickness) second class hard wood, glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc , divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded with cut mitred beds for securing glass etc, supplied and fitted to chowkhats complete all as specified and directed.Note: The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I) |
| 35 | S&F of 100 mm size butt hinges, medium weight, cold rolled mild steel and fixed, all as specified and directed. |
| 36 | S&F of 75 mm size butt hinges, medium weight, cold rolled mild steel and fixed, all as specified and directed. |
| 37 | S&F of 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed, all as specified and directed. |
| 38 | S&F of 100 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed, all as specified and directed. |
| 39 | S&F of 150 mm size aluminium handles, cast type, anodised, all as specified and directed. |
| 40 | S&F of 100 mm size aluminium handles, cast type, anodised, all as specified and directed. |
| 41 | S&F of 100mm size hasp and staple, brass with mild steel hinge pin, including bolt to hinge plate and fixed with screws, all as specified and directed. |
| 42 | S&F of 140 mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, all as specified and directed. |
| 43 | M&L for preparation of new wooden or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 44 | S&F of mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 45 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. |
| 46 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 47 | S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples fixed, complete all as specified and directed. |
| 48 | M&L for plain cement concrete(1:3:6), type C-2 (40 mm graded stone aggregate) in surface channels and drains including all necessary form work, complete all as specified and directed. |
| 49 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and directed. |
| 50 | M&L for coloured non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6), complete all as specified and directed. |
| 51 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:6), complete all as specified and directed. |
| 52 | Ditto all as item No 51 above but on vertical surface of wall like skerting/dadoi etc on 15mm thick (1:4) rendering etc complete all as specified and directed. |
| 53 | M&L for glazed ceramic colouered tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surface such as risers of steps, skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile A644complete all as specified and directed. |
| 54 | M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) finished even and rough, complete all as specified and directed. |
| 55 | M&L machine cut kota stone slab flooring 20-25 mm thick complete over and including 15 mm thick screed bed or bedding layer in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 56 | M&L for machine cut Kota stone slab as in vertical surfaces such as dado/skirting, 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete over and including 10 mm thick rendering in cement mortar (1:4) finished even and rough, complete all as specified and directed. |
| 57 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations . |
| 58 | M&L for reinforced cement concrete (nominal mix) (1:2:4), type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 59 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 60 | M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified and as directed. |
| 61 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., rough finished surfaces of concrete on flat surface, complete all as specified and directed. |
| 62 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), flat fair finished surface of concrete, all as specified and directed. |
| 63 | Taking up or down old 20 mm bore steel water tubing and connections, including cleaning for refixing or removal to store or from site, complete all as specified and directed. |
| 64 | Taking up or down old 25 mm bore steel water tubing and connections, including cleaning for refixing or removal to store or from site, complete all as specified and directed. |
| 65 | upplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified etc complete all as directed by the Engr-in-Charge. |
| 66 | S&F of 25 mm bore steel water tubes, medium grade, galvanised with and including all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor, complete all as specified and directed. |
| 67 | S&F of PVC low level flushing cistern 10 litre capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS:2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type, complete all as specified and directed. |
| 68 | S&F of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 69 | S&F in repairs of water closet (squatt pattern) of vitreous china squatting pan of pattern \\"ORRISA\\" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonic pipe etc complete including P or S trap set in and including necessary lean cement concrete, complete all as specified and directed. |
| 70 | S&F of vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including mild steel chromium plated health faucet suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook with plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 71 | S&F in repair vitreous china wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, taps, chain and plug and porcelain stopper but including bracketsincluding 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, all as specified and directed. |
| 72 | S&F in repairs cromium plated central hole basin mixer/sink mixer Extended casted spout with 450mm long braided hoses complete all as specified and as directed. |
| 73 | S&F in repair cromium plated wall mixer 15mm bore with 115mm long bend pipe for connection to over head shower (with Bush & piston diverter fittings) with aerator screwed down for 15mm bore GI Pipe or for brass ferrule. |
| 74 | S&F of 15 mm bore chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 75 | S&F in repair two way Bib tap , long body cast copper alloy, chromium plated with crutch or butterfly handle with health fuceset , screwed down for 15mm bore GI Pipe or for brass ferrule. |
| 76 | S&F in repair corner glass shelf 225x 225mm with CP steel frame complete all as specified and directed.Make CERA cat part No : F5005102 or equialent |
| 77 | S&F in repair of brass chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 78 | S&F in repair Angular Stop Cock with flang.Make Cera CAT No : QT F2006201/HTF3001201 or quivalent complete |
| 79 | &F of PVC connections 15mm size with PTMT nuts of length 450mm, all as specified and directed. |
| 80 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 81 | S &F Stainless steel towel ring round .Make Essco : cat part No AEC-1221N OR Equivalent |
| 82 | S &F soap dish cromium plated body and Polycarbonate brackets including wall flange and screws etc Make :Essco cat part No AEC-1133 or equivalent |
| 83 | S&F in Repair 75 mm dia PVC floor trap of outlet, with gratings, including jointing to waste pipe fixed in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) complete all as specified and as directed. |
| 84 | S&F of PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 85 | S&F of 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 86 | S&F of 110mm bore PVC (SWR) junction single, (Single T) equal or unequal including jointing with solvent cement, complete all as specified and directed. |
| 87 | S&F of PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints, laid in trenches or in floors/weep hole, complete all as specified and directed. |
| 88 | S&F in repairs PVC (SWR) pipes 150mm dia single socketed in any length with rubber ring joints fixed to walls complete all as directed. |
| 89 | S&F of 110 mm bore PVC (SWR) vent cowl including jointing with solvent cement, complete all as specified and directed. |
| 90 | S&F of 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door including jointing with solvent cement, complete all as specified and directed. |
| 91 | S&F fo Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc conforming to Gde 410 W (Gde-E-250) quality -B- complete all as specified and directed. |
| 92 | S&F in repairs Harrison rails, mild steel, chromium plated 25mm dia with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 93 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, laying of underground cables etc. or for shafts, wells, cesspits, manholes, pier holes, under groung cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil, complete all as specified and directed. |
| 94 | M&L for plain cement concrete (1:3:6), type C2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed. |
| 95 | M&L for plain cement concrete (1:3:6), type C-2 (using 40mm graded stone aggregate) as in plum concrete in retaining walls/ toe wall/drain wall any thiskness, size of shape including pilasters, buttersses columns, pillars, boundary pillars and post (incl caps ans bases) complete all as specified and as directed. |
| 96 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping including weathering slightly rounded or chamfered angles and throating and necessary form work and finishing all exposed surface of concrete complete all as specified and as directed. |
| 97 | Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter flat rough finished surface of concrete, all as specified and directed. |
| 98 | Excavation in post holes in soft/loose soil or similar holes each n exc 0.5 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and remaning surplus soil removing to a distance n exc 50cm and making good surface, complete all as specified and directed |
| 99 | S&F of joist, channel, angle, flat iron or tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A), complete all as specified and directed. |
| 100 | M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and diameter of neck 5 to 10 mm, all as specified and directed. |
| 101 | S & F Pre PVC coated chain link fencing size of mesh 50mmx50mm made out of 4mm dia GI (Confirming to relecant IS) to any type of standared rails straining bolts etc complete all as specified and directed. |
| 102 | S&F 10mm dia MS rounds bars provided in between fencing post to support chain link fencing incl necessary cutting, bending and hooking etc complete all as per specified and as directed by Engineer-in-charge. |
| 103 | M&L for preparation of new steel surfaces or previously untreated surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. |
| 104 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed. |
| 105 | Taking down unserviceable submain wiring of any size two single core including earth wire and pvc conduit /casing capping and removing materials on site and making good the surface of walls etc complete all as specified. |
| 106 | Taking down unserviceable distribution board or indoor panel of any capacity including wooden board and making good the disturbed surfaces of wall, etc including two coats of white /colour washing /distempering etc to match the existing complete all as specified. |
| 107 | Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un-sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping of required size (not less than 20mm) conforming to IS 2079-1973, medium grade with all necessary fittings, surface wiring, for one light point or one fan point or one bell point controlled by one switch, with 1.5 Sq mm PVC insulated and unsheathed copper conductor for earth continuity conductor and making good disturbed surfaces to match with the existing surface roof/wall/floor, complete all as specified and directed including testing on completion. |
| 108 | One Light/fan point controlled by one, one way switch. |
| 109 | One 3 pin 5 amps switch socket outlet point on independent board. |
| 110 | One 3 pin socket outlet 5 amps on the same board with other switches |
| 111 | One light point controlledby two way switches |
| 112 | All as per item Sl. No. 107 here in before but wiring with 2.5 sq.mm multistranded cable and earth wire with copper conductor |
| 113 | All as per item Sl. No. 107 here in before but wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for Metal clad socket |
| 114 | M&L for modular switch one way 6 Amps, 1 module, 240 Volts, all as specified and directed. |
| 115 | M&L for modular socket, 6 Amps - 2/3 pin combined 2 module, 240 Volts, all as specified and directed. |
| 116 | Supply and fix Modular switch 2 way 6 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 117 | Supply and fix Modular switch 1 way 16 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 118 | M&L for modular socket, 6Amps / 16Amps - 2/3 pin combined 2 module, 240 Volts, all as specified and directed. |
| 119 | Supply and fixing of LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 120 | Supply & fixing LED wall light 1x20watt 220 V, AC decorative wall light holder with LED bulb suitable for 20 W LED lamp B22 base connecting up with three core flexible copper conductor cable of suitable size all as specified. |
| 121 | S&F of water proof LED light fitting 1x9 Watt / 1X10 Watt bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, all as specified and directed. |
| 122 | Supply and fixing of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete, all as specified and directed. |
| 123 | S&F ceiling rose, 3 phase ,PVC polycarbonate ,insulated body (ISI Marked) complete all as specified and directed. |
| 124 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete, all as specified and directed. |
| 125 | S&F single pole & neutral enclosure with a two pin & earth plug & socket complete with one single pole MCB C curve of 20 A rating complete all as specified and directed |
| 126 | M&L for concealed sub-main wiring along with earth wire of size e 2x10 sqmm with 1x10 sqmm earth wire ,ISI marked FRLS ,PVC insulated ,multi stranded , copper conductor ,single core cable drawn through and incl PVC rigid conduit (medium grade) size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduit & sinking for sunken boxes & making good to walls, floors etc complete all as specified and directed |
| 127 | M&L for concealed sub-main wiring along with earth wire of size e 2x06 sqmm with 1x6 sqmm earth wire ,ISI marked FRLS ,PVC insulated ,multi stranded , copper conductor ,single core cable drawn through and incl PVC rigid conduit (medium grade) size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduit & sinking for sunken boxes & making good to walls, floors etc complete all as specified and directed |
| 128 | S&F for MCB DB TPN 4 ways Double Door 415 Volt 200 Amp with rated bus bar ,IP-42,IK-09, metal door, earth bar, neutral links complete incl blanking plates as required & fixed flush to wall / other surface complete all as specified and as directed |
| 129 | S&F for MCB DB SPN 6 ways Double Door 240 Volt with 200 Amp rated bus bar ,IP-42,IK-09, metal door, earth bar, neutral links complete incl blanking plates as required & fixed flush to wall / other surface complete all as specified and as directed |
| 130 | S&F for MCB DB SPN 8 ways Double Door 240 Volt with rated bus bar ,IP-42,IK-09, metal door, earth bar, neutral links complete incl blanking plates as required & fixed flush to wall / other surface complete all as specified and as directed |
| 131 | S&F for MCB DB SPN 4 ways Single Door with 200 Amp rated bus bar ,IP-42,IK-09, metal door, earth bar, neutral links complete incl blanking plates as required & fixed flush to wall / other surface complete all as specified and as directed |
| 132 | S&F TPN 40 to 100 Amp 415 Volts 10 KA, C curve MCB 4 pole and current carrying capacity in DB complete with connection testing and commissioning all as specified And directed |
| 133 | S&F MCB single pole & neutral SPN 32 Amps , 240 Volts , 10 KA rupturing capacity , C curve complete all as directed |
| 134 | S&F MCB single pole 6 to 32 Amps , 240 Volts , 10 KA rupturing capacity , C curve complete all as directed |
| 135 | Taking up existing defective cable of size 2/3/3.5/4 core 10 to 70 sqmm from the trenches ducts /along walls /poles/ under road inside sub station all as specified and as directed |
| 136 | Supply ,laying ,jointing and testing in trenches or passing through pipe, 1100 Volts grade XLPE insulated, armoured heavy duty electric cable with aluminium conductor of cross sectional area 25 Sqmm 4 core with necessary fixing arrangements such as lugs, glands and terminal etc complete all as specified and as directed |
| 137 | Supply and laying DWC pipe SN-4 with coupler 40 mm OD, ISI marked along with all accessories like socket bend couplers etc. Conforming to IS 14930 , part II complete with fitting and cutting , jointing etc . Laid in trenches /fixed to pole /laying under road crossing /fixed on pavement wall with clamps complete all as specified |
| 138 | S&F of GI tubing of 50 mm bore medium grade ISI Marked fixing on wall jointed tested and commissioned including all fittings such as elbow, union, reducer, tees, bends etc and short length, complete all as specified and directed. |
| 139 | Returning filling in soft / loose soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm, complete all as specified and directed. |
| 140 | Removal of surplus excavated soils to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point, complete all as specified and directed. |
| 141 | Supply ,laying ,jointing and testing in trenches or passing through pipe, 1100 Volts grade XLPE insulated, armoured heavy duty electric cable with aluminium conductor of cross sectional area 6 Sqmm 2 core with necessary fixing arrangements such as lugs, glands and terminal etc complete all as specified and as directed |
| 142 | Supply and fixing of LED street light fitting 35 Watt 230 Volt AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and impact resitance of IK 07 complete GI bracket 1.5 m long made out of GI dia suitable for fixing street light bend to suitable radius incl 2 sets of clamps nuts bolts washers incl painting with aluminium paint etc, all as specified and directed. |
| 143 | M&L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level connected with galvanised iron/steel earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to DBs including necessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete all as specified and directed by Engineer-in-Charge .Notes: Contractor should conduct necessary test such as earth continuity, earth resistance test in presence of Engineer-in-Charge. |
| 144 | Dismantling water tanks of capacity exc 1000 and n exc 2000 litres and removing to store, complete all as specified and directed. |
| 145 | Taking out old GI Tubing 20/25 mm with with Gun metal valve of any type, complete all as specified and directed. |
| 146 | Supply & Fixing rotational moulded polythene water storage tank 1000 Ltrs capacity, ISI marked multi multilayer constraction (cylindrical vertical with closed top) hoisted & fixed in position etc all as specified and as directed |
| 147 | Supply and laying testing steel water tubing medium grade with all fitting fixed to wall/ceiling or laid in floor of size 25 mm bore all as specified and directed. |
| 148 | S&F for Gun-metal, globe or gate valves, ISI marked, 25mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed |
| 149 | Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates.Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender